Re: 4.56 gears in a Dana 30 front
The issue with the carrier is that the Ring gear won't fit the carrier for
taller than 3.73s. "Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message news:XZFHb.22399$Pg1.9205@newsread1.news.pas.earth link.net... > It's been a few years, but thinking back I'm sure I didn't have to replace > the entire reverse-cut D30 carrier when I installed the 4.56 R&P because I > installed a LockRight locker at the same time, which replaces the side and > spider gears. Didn't your LockRight install go this way too? > > Terry 92YJ > (now running dual D60s w/Detroits) > > > "JimG" <jimg@cj7_2muchspam.com> wrote in message > news:pdFHb.32159$Wc4.17075@news01.roc.ny... > > You will have to get a new carrier for the D30, been there, done that. > > > > -- > > JimG > > 80' CJ-7 258 CID > > 35" BFG MT on 15x10 Centerlines > > D44 Rear, Dana 30 Front. SOA > > 4.56 Gears, LockRight F&R > > Dana 300 w/4:1 & Currie twin sticks > > Warn X8000i w/ dual batteries > > > > "Tom P." <TPatzlaff@aol.com> wrote in message > > news:dd809f71.0312281017.6ee22391@posting.google.c om... > > > I have an "88" wrangler with a Dana 35 rear and Dana 30 front. I > > > currently have 3.55 gears in both diffs. and would like to put 4.56 > > > gears in both. > > > The literature I can find says that if I have 3.55 or lower gears in > > > the D35, I will be ok. But what I need to know is if the 4.56 gears > > > will fit in the D30 case? From what I can find it sounds like I'm > > > going to need a housing with 3.73 or lower gears in it for the 4.56 to > > > fit.I need to find out the real answer. > > > Has anyone out there put 4.56 gears in these size housings? > > > Any help or advice would be great. > > > Tom > > > > > > |
Re: 4.56 gears in a Dana 30 front
The issue with the carrier is that the Ring gear won't fit the carrier for
taller than 3.73s. "Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message news:XZFHb.22399$Pg1.9205@newsread1.news.pas.earth link.net... > It's been a few years, but thinking back I'm sure I didn't have to replace > the entire reverse-cut D30 carrier when I installed the 4.56 R&P because I > installed a LockRight locker at the same time, which replaces the side and > spider gears. Didn't your LockRight install go this way too? > > Terry 92YJ > (now running dual D60s w/Detroits) > > > "JimG" <jimg@cj7_2muchspam.com> wrote in message > news:pdFHb.32159$Wc4.17075@news01.roc.ny... > > You will have to get a new carrier for the D30, been there, done that. > > > > -- > > JimG > > 80' CJ-7 258 CID > > 35" BFG MT on 15x10 Centerlines > > D44 Rear, Dana 30 Front. SOA > > 4.56 Gears, LockRight F&R > > Dana 300 w/4:1 & Currie twin sticks > > Warn X8000i w/ dual batteries > > > > "Tom P." <TPatzlaff@aol.com> wrote in message > > news:dd809f71.0312281017.6ee22391@posting.google.c om... > > > I have an "88" wrangler with a Dana 35 rear and Dana 30 front. I > > > currently have 3.55 gears in both diffs. and would like to put 4.56 > > > gears in both. > > > The literature I can find says that if I have 3.55 or lower gears in > > > the D35, I will be ok. But what I need to know is if the 4.56 gears > > > will fit in the D30 case? From what I can find it sounds like I'm > > > going to need a housing with 3.73 or lower gears in it for the 4.56 to > > > fit.I need to find out the real answer. > > > Has anyone out there put 4.56 gears in these size housings? > > > Any help or advice would be great. > > > Tom > > > > > > |
Re: 4.56 gears in a Dana 30 front
"Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message news:UfNHb.23564$Pg1.3168@newsread1.news.pas.earth link.net... > Yup, I agree with that. Thing is though, Bill, I did all the install work > myself and I still don't recall replacing the carrier. And I've always > prided myself with a having pretty good memory (until now)!! Oh yea, my > brother-in-law did assist with the install (only cost me a few beers). > > Terry. > All those drugs you did as a kid are starting to catch up with you. You had to replace the carrier or the 4.56 ring gear would not have fit. |
Re: 4.56 gears in a Dana 30 front
"Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message news:UfNHb.23564$Pg1.3168@newsread1.news.pas.earth link.net... > Yup, I agree with that. Thing is though, Bill, I did all the install work > myself and I still don't recall replacing the carrier. And I've always > prided myself with a having pretty good memory (until now)!! Oh yea, my > brother-in-law did assist with the install (only cost me a few beers). > > Terry. > All those drugs you did as a kid are starting to catch up with you. You had to replace the carrier or the 4.56 ring gear would not have fit. |
Re: 4.56 gears in a Dana 30 front
"Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message news:UfNHb.23564$Pg1.3168@newsread1.news.pas.earth link.net... > Yup, I agree with that. Thing is though, Bill, I did all the install work > myself and I still don't recall replacing the carrier. And I've always > prided myself with a having pretty good memory (until now)!! Oh yea, my > brother-in-law did assist with the install (only cost me a few beers). > > Terry. > All those drugs you did as a kid are starting to catch up with you. You had to replace the carrier or the 4.56 ring gear would not have fit. |
Re: 4.56 gears in a Dana 30 front
>
> All those drugs you did as a kid are starting to catch up with you. You had > to replace the carrier or the 4.56 ring gear would not have fit. > That seems to be the consensus! :). If so, I should still have the old carrier in my pile of Jeep parts. When I get over this head cold and the outside temp gets above 20 degrees I might go search for it. By the way - no drugs for me, my friend. Drinking heavily used to be the routine though, especially during my college and military years. The good old days! Terry. |
Re: 4.56 gears in a Dana 30 front
>
> All those drugs you did as a kid are starting to catch up with you. You had > to replace the carrier or the 4.56 ring gear would not have fit. > That seems to be the consensus! :). If so, I should still have the old carrier in my pile of Jeep parts. When I get over this head cold and the outside temp gets above 20 degrees I might go search for it. By the way - no drugs for me, my friend. Drinking heavily used to be the routine though, especially during my college and military years. The good old days! Terry. |
Re: 4.56 gears in a Dana 30 front
>
> All those drugs you did as a kid are starting to catch up with you. You had > to replace the carrier or the 4.56 ring gear would not have fit. > That seems to be the consensus! :). If so, I should still have the old carrier in my pile of Jeep parts. When I get over this head cold and the outside temp gets above 20 degrees I might go search for it. By the way - no drugs for me, my friend. Drinking heavily used to be the routine though, especially during my college and military years. The good old days! Terry. |
Re: 4.56 gears in a Dana 30 front
Thanks for chiming in CRWLR... can't seem to convince Terry.
JimG "CRWLR" <beerman@yahoo.com> wrote in message news:vv133844sas0a8@corp.supernews.com... > The issue with the carrier is that the Ring gear won't fit the carrier for > taller than 3.73s. > > > > > "Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message > news:XZFHb.22399$Pg1.9205@newsread1.news.pas.earth link.net... > > It's been a few years, but thinking back I'm sure I didn't have to replace > > the entire reverse-cut D30 carrier when I installed the 4.56 R&P because I > > installed a LockRight locker at the same time, which replaces the side and > > spider gears. Didn't your LockRight install go this way too? > > > > Terry 92YJ > > (now running dual D60s w/Detroits) > > > > > > "JimG" <jimg@cj7_2muchspam.com> wrote in message > > news:pdFHb.32159$Wc4.17075@news01.roc.ny... > > > You will have to get a new carrier for the D30, been there, done that. > > > > > > -- > > > JimG > > > 80' CJ-7 258 CID > > > 35" BFG MT on 15x10 Centerlines > > > D44 Rear, Dana 30 Front. SOA > > > 4.56 Gears, LockRight F&R > > > Dana 300 w/4:1 & Currie twin sticks > > > Warn X8000i w/ dual batteries > > > > > > "Tom P." <TPatzlaff@aol.com> wrote in message > > > news:dd809f71.0312281017.6ee22391@posting.google.c om... > > > > I have an "88" wrangler with a Dana 35 rear and Dana 30 front. I > > > > currently have 3.55 gears in both diffs. and would like to put 4.56 > > > > gears in both. > > > > The literature I can find says that if I have 3.55 or lower gears in > > > > the D35, I will be ok. But what I need to know is if the 4.56 gears > > > > will fit in the D30 case? From what I can find it sounds like I'm > > > > going to need a housing with 3.73 or lower gears in it for the 4.56 to > > > > fit.I need to find out the real answer. > > > > Has anyone out there put 4.56 gears in these size housings? > > > > Any help or advice would be great. > > > > Tom > > > > > > > > > > > |
Re: 4.56 gears in a Dana 30 front
Thanks for chiming in CRWLR... can't seem to convince Terry.
JimG "CRWLR" <beerman@yahoo.com> wrote in message news:vv133844sas0a8@corp.supernews.com... > The issue with the carrier is that the Ring gear won't fit the carrier for > taller than 3.73s. > > > > > "Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message > news:XZFHb.22399$Pg1.9205@newsread1.news.pas.earth link.net... > > It's been a few years, but thinking back I'm sure I didn't have to replace > > the entire reverse-cut D30 carrier when I installed the 4.56 R&P because I > > installed a LockRight locker at the same time, which replaces the side and > > spider gears. Didn't your LockRight install go this way too? > > > > Terry 92YJ > > (now running dual D60s w/Detroits) > > > > > > "JimG" <jimg@cj7_2muchspam.com> wrote in message > > news:pdFHb.32159$Wc4.17075@news01.roc.ny... > > > You will have to get a new carrier for the D30, been there, done that. > > > > > > -- > > > JimG > > > 80' CJ-7 258 CID > > > 35" BFG MT on 15x10 Centerlines > > > D44 Rear, Dana 30 Front. SOA > > > 4.56 Gears, LockRight F&R > > > Dana 300 w/4:1 & Currie twin sticks > > > Warn X8000i w/ dual batteries > > > > > > "Tom P." <TPatzlaff@aol.com> wrote in message > > > news:dd809f71.0312281017.6ee22391@posting.google.c om... > > > > I have an "88" wrangler with a Dana 35 rear and Dana 30 front. I > > > > currently have 3.55 gears in both diffs. and would like to put 4.56 > > > > gears in both. > > > > The literature I can find says that if I have 3.55 or lower gears in > > > > the D35, I will be ok. But what I need to know is if the 4.56 gears > > > > will fit in the D30 case? From what I can find it sounds like I'm > > > > going to need a housing with 3.73 or lower gears in it for the 4.56 to > > > > fit.I need to find out the real answer. > > > > Has anyone out there put 4.56 gears in these size housings? > > > > Any help or advice would be great. > > > > Tom > > > > > > > > > > > |
All times are GMT -4. The time now is 09:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands