Hey Mort,
Picked up some PB today from the Clark Rd. store. $6.40 for 12oz can. Bought
some other items as well, the Manager (Mike Overholt) was VERY helpful and I
think he was giving me trade prices.

4 cans of PB
5 recip-saw metal blades
1 4.5" cutting disc
1 chipping (welding) hammer
Just over $60 tax included.

This was a much better experience than my first visit... I was getting the
"if you have to ask how much it is...." type of attitude and I think the guy
was making up prices on-the-fly. With Mike, I'd ask for a price and he'd ask
"how many?".

Thanks for mentioning Fastenal, I'll be shopping there more often.
-Brian

"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:gilcc.20107$n37.1566009@read2.cgocable.net...
: $7.52/can is about what you should be paying. I hope this helps. If
: they try to charge you more tell them that you pay less when you deal
: with other locations.
:
: Cherokee-LTD wrote:
: > Mort,
: > Thanks for pointing out the Midpark address... it's only about two miles
: > from me. Is that a new location? It's about the same distance as
Brafasco
: > and closer than Facca for me. I'll wait for your price quote and head
: > over... the price comparison may give me an indication of the pricing
: > tendency. I found the Clark Rd. store to be roughly 10% higher across
the
: > board than Brafasco.
: > -Brian
: >
: > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > news:jFGbc.19584$n37.1482650@read2.cgocable.net...
: > : There should be 2 locations in London. One is at 500 Clarke Road and
: > : the other is at 105 Midpark Rd. Hope this helps. I can get you a
price
: > : of what you should be paying on Monday. I know some stores hike
prices
: > : for walk-ins but if you ask for a certain price they will usually give
: > : it to you.
: > : Mort
: > :
: > : Cherokee-LTD wrote:
: > : > I'm in London south, they're in the upper east side of the city.
: > : > -Brian
: > : >
: > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
: > : > : Where do you live?
: > : > :
: > : > : Cherokee-LTD wrote:
: > : > : > Thanks Mort - I never thought to try them for two reasons. 1.
: > they're
: > : > across
: > : > : > the city 2. they're not competitive price-wise. I'm more than
: > willing to
: > : > go
: > : > : > out of my way and pay a bit extra for PB... everybody swears by
it
: > in
: > : > here
: > : > : > but nobody in town has ever heard of it (or at least they say so
and
: > : > then
: > : > : > push their product).
: > : > : > -Brian
: > : > : >
: > : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
: > : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: > : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a
list
: > of
: > : > : > : Canadian locations
: > : > : > :
: > : > : > : Kevin in San Diego wrote:
: > : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
: > penetrating
: > : > oil
: > : > : > : > like pb blaster?
: > : > : > : > KH
: > : > : > : >
: > : > : > : >
: > : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > : > : > : >
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: > : > : > : >
: > : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left
front
: > lower
: > : > pin
: > : > : > : >>WILL NOT come out! I've removed the header
panel...fender...door
: > for
: > : > : > : >
: > : > : > : > access
: > : > : > : >
: > : > : > : >>and no luck. I ended up cutting the pin from the hinge but
the
: > top
: > : > and
: > : > : > : >>bottom is still stuck in there... any ideas?
: > : > : > : >>
: > : > : > : >>Tried beating it out in the vice... nothing
: > : > : > : >>Tried drilling it out in the drill press... not even
scratching
: > it.
: > : > : > : >>
: > : > : > : >>I'm going to try some heat tomorrow but I have a feeling
I'll be
: > : > : > ordering
: > : > : > : >
: > : > : > : > a
: > : > : > : >
: > : > : > : >>new hinge. Damn 20 minute job will have me out of commission
for
: > : > days!
: > : > : > : >>
: > : > : > : >>-Brian
: > : > : > : >>
: > : > : > : >>
: > : > : > : >>
: > : > : > : >
: > : > : > : >
: > : > : > : >
: > : > : > :
: > : > : >
: > : > : >
: > : > :
: > : >
: > : >
: > :
: >
: >
:

 

Not a problem. The pricing structures changed in the summer/fall so
it's more uniform now. I'm glad you're happy. If you ever want to buy
something pricey there let me know and I can tell you what range you
should be paying.

Mort

Cherokee-LTD wrote:
> Hey Mort,
> Picked up some PB today from the Clark Rd. store. $6.40 for 12oz can. Bought
> some other items as well, the Manager (Mike Overholt) was VERY helpful and I
> think he was giving me trade prices.
>
> 4 cans of PB
> 5 recip-saw metal blades
> 1 4.5" cutting disc
> 1 chipping (welding) hammer
> Just over $60 tax included.
>
> This was a much better experience than my first visit... I was getting the
> "if you have to ask how much it is...." type of attitude and I think the guy
> was making up prices on-the-fly. With Mike, I'd ask for a price and he'd ask
> "how many?".
>
> Thanks for mentioning Fastenal, I'll be shopping there more often.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:gilcc.20107$n37.1566009@read2.cgocable.net...
> : $7.52/can is about what you should be paying. I hope this helps. If
> : they try to charge you more tell them that you pay less when you deal
> : with other locations.
> :
> : Cherokee-LTD wrote:
> : > Mort,
> : > Thanks for pointing out the Midpark address... it's only about two miles
> : > from me. Is that a new location? It's about the same distance as
> Brafasco
> : > and closer than Facca for me. I'll wait for your price quote and head
> : > over... the price comparison may give me an indication of the pricing
> : > tendency. I found the Clark Rd. store to be roughly 10% higher across
> the
> : > board than Brafasco.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : > : There should be 2 locations in London. One is at 500 Clarke Road and
> : > : the other is at 105 Midpark Rd. Hope this helps. I can get you a
> price
> : > : of what you should be paying on Monday. I know some stores hike
> prices
> : > : for walk-ins but if you ask for a certain price they will usually give
> : > : it to you.
> : > : Mort
> : > :
> : > : Cherokee-LTD wrote:
> : > : > I'm in London south, they're in the upper east side of the city.
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : > : Where do you live?
> : > : > :
> : > : > : Cherokee-LTD wrote:
> : > : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> : > they're
> : > : > across
> : > : > : > the city 2. they're not competitive price-wise. I'm more than
> : > willing to
> : > : > go
> : > : > : > out of my way and pay a bit extra for PB... everybody swears by
> it
> : > in
> : > : > here
> : > : > : > but nobody in town has ever heard of it (or at least they say so
> and
> : > : > then
> : > : > : > push their product).
> : > : > : > -Brian
> : > : > : >
> : > : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a
> list
> : > of
> : > : > : > : Canadian locations
> : > : > : > :
> : > : > : > : Kevin in San Diego wrote:
> : > : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> : > penetrating
> : > : > oil
> : > : > : > : > like pb blaster?
> : > : > : > : > KH
> : > : > : > : >
> : > : > : > : >
> : > : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > : >
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : > : >
> : > : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left
> front
> : > lower
> : > : > pin
> : > : > : > : >>WILL NOT come out! I've removed the header
> panel...fender...door
> : > for
> : > : > : > : >
> : > : > : > : > access
> : > : > : > : >
> : > : > : > : >>and no luck. I ended up cutting the pin from the hinge but
> the
> : > top
> : > : > and
> : > : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : > : >>
> : > : > : > : >>Tried beating it out in the vice... nothing
> : > : > : > : >>Tried drilling it out in the drill press... not even
> scratching
> : > it.
> : > : > : > : >>
> : > : > : > : >>I'm going to try some heat tomorrow but I have a feeling
> I'll be
> : > : > : > ordering
> : > : > : > : >
> : > : > : > : > a
> : > : > : > : >
> : > : > : > : >>new hinge. Damn 20 minute job will have me out of commission
> for
> : > : > days!
> : > : > : > : >>
> : > : > : > : >>-Brian
> : > : > : > : >>
> : > : > : > : >>
> : > : > : > : >>
> : > : > : > : >
> : > : > : > : >
> : > : > : > : >
> : > : > : > :
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>

 

Not a problem. The pricing structures changed in the summer/fall so
it's more uniform now. I'm glad you're happy. If you ever want to buy
something pricey there let me know and I can tell you what range you
should be paying.

Mort

Cherokee-LTD wrote:
> Hey Mort,
> Picked up some PB today from the Clark Rd. store. $6.40 for 12oz can. Bought
> some other items as well, the Manager (Mike Overholt) was VERY helpful and I
> think he was giving me trade prices.
>
> 4 cans of PB
> 5 recip-saw metal blades
> 1 4.5" cutting disc
> 1 chipping (welding) hammer
> Just over $60 tax included.
>
> This was a much better experience than my first visit... I was getting the
> "if you have to ask how much it is...." type of attitude and I think the guy
> was making up prices on-the-fly. With Mike, I'd ask for a price and he'd ask
> "how many?".
>
> Thanks for mentioning Fastenal, I'll be shopping there more often.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:gilcc.20107$n37.1566009@read2.cgocable.net...
> : $7.52/can is about what you should be paying. I hope this helps. If
> : they try to charge you more tell them that you pay less when you deal
> : with other locations.
> :
> : Cherokee-LTD wrote:
> : > Mort,
> : > Thanks for pointing out the Midpark address... it's only about two miles
> : > from me. Is that a new location? It's about the same distance as
> Brafasco
> : > and closer than Facca for me. I'll wait for your price quote and head
> : > over... the price comparison may give me an indication of the pricing
> : > tendency. I found the Clark Rd. store to be roughly 10% higher across
> the
> : > board than Brafasco.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : > : There should be 2 locations in London. One is at 500 Clarke Road and
> : > : the other is at 105 Midpark Rd. Hope this helps. I can get you a
> price
> : > : of what you should be paying on Monday. I know some stores hike
> prices
> : > : for walk-ins but if you ask for a certain price they will usually give
> : > : it to you.
> : > : Mort
> : > :
> : > : Cherokee-LTD wrote:
> : > : > I'm in London south, they're in the upper east side of the city.
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : > : Where do you live?
> : > : > :
> : > : > : Cherokee-LTD wrote:
> : > : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> : > they're
> : > : > across
> : > : > : > the city 2. they're not competitive price-wise. I'm more than
> : > willing to
> : > : > go
> : > : > : > out of my way and pay a bit extra for PB... everybody swears by
> it
> : > in
> : > : > here
> : > : > : > but nobody in town has ever heard of it (or at least they say so
> and
> : > : > then
> : > : > : > push their product).
> : > : > : > -Brian
> : > : > : >
> : > : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a
> list
> : > of
> : > : > : > : Canadian locations
> : > : > : > :
> : > : > : > : Kevin in San Diego wrote:
> : > : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> : > penetrating
> : > : > oil
> : > : > : > : > like pb blaster?
> : > : > : > : > KH
> : > : > : > : >
> : > : > : > : >
> : > : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > : >
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : > : >
> : > : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left
> front
> : > lower
> : > : > pin
> : > : > : > : >>WILL NOT come out! I've removed the header
> panel...fender...door
> : > for
> : > : > : > : >
> : > : > : > : > access
> : > : > : > : >
> : > : > : > : >>and no luck. I ended up cutting the pin from the hinge but
> the
> : > top
> : > : > and
> : > : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : > : >>
> : > : > : > : >>Tried beating it out in the vice... nothing
> : > : > : > : >>Tried drilling it out in the drill press... not even
> scratching
> : > it.
> : > : > : > : >>
> : > : > : > : >>I'm going to try some heat tomorrow but I have a feeling
> I'll be
> : > : > : > ordering
> : > : > : > : >
> : > : > : > : > a
> : > : > : > : >
> : > : > : > : >>new hinge. Damn 20 minute job will have me out of commission
> for
> : > : > days!
> : > : > : > : >>
> : > : > : > : >>-Brian
> : > : > : > : >>
> : > : > : > : >>
> : > : > : > : >>
> : > : > : > : >
> : > : > : > : >
> : > : > : > : >
> : > : > : > :
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>

 

Not a problem. The pricing structures changed in the summer/fall so
it's more uniform now. I'm glad you're happy. If you ever want to buy
something pricey there let me know and I can tell you what range you
should be paying.

Mort

Cherokee-LTD wrote:
> Hey Mort,
> Picked up some PB today from the Clark Rd. store. $6.40 for 12oz can. Bought
> some other items as well, the Manager (Mike Overholt) was VERY helpful and I
> think he was giving me trade prices.
>
> 4 cans of PB
> 5 recip-saw metal blades
> 1 4.5" cutting disc
> 1 chipping (welding) hammer
> Just over $60 tax included.
>
> This was a much better experience than my first visit... I was getting the
> "if you have to ask how much it is...." type of attitude and I think the guy
> was making up prices on-the-fly. With Mike, I'd ask for a price and he'd ask
> "how many?".
>
> Thanks for mentioning Fastenal, I'll be shopping there more often.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:gilcc.20107$n37.1566009@read2.cgocable.net...
> : $7.52/can is about what you should be paying. I hope this helps. If
> : they try to charge you more tell them that you pay less when you deal
> : with other locations.
> :
> : Cherokee-LTD wrote:
> : > Mort,
> : > Thanks for pointing out the Midpark address... it's only about two miles
> : > from me. Is that a new location? It's about the same distance as
> Brafasco
> : > and closer than Facca for me. I'll wait for your price quote and head
> : > over... the price comparison may give me an indication of the pricing
> : > tendency. I found the Clark Rd. store to be roughly 10% higher across
> the
> : > board than Brafasco.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : > : There should be 2 locations in London. One is at 500 Clarke Road and
> : > : the other is at 105 Midpark Rd. Hope this helps. I can get you a
> price
> : > : of what you should be paying on Monday. I know some stores hike
> prices
> : > : for walk-ins but if you ask for a certain price they will usually give
> : > : it to you.
> : > : Mort
> : > :
> : > : Cherokee-LTD wrote:
> : > : > I'm in London south, they're in the upper east side of the city.
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : > : Where do you live?
> : > : > :
> : > : > : Cherokee-LTD wrote:
> : > : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> : > they're
> : > : > across
> : > : > : > the city 2. they're not competitive price-wise. I'm more than
> : > willing to
> : > : > go
> : > : > : > out of my way and pay a bit extra for PB... everybody swears by
> it
> : > in
> : > : > here
> : > : > : > but nobody in town has ever heard of it (or at least they say so
> and
> : > : > then
> : > : > : > push their product).
> : > : > : > -Brian
> : > : > : >
> : > : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a
> list
> : > of
> : > : > : > : Canadian locations
> : > : > : > :
> : > : > : > : Kevin in San Diego wrote:
> : > : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> : > penetrating
> : > : > oil
> : > : > : > : > like pb blaster?
> : > : > : > : > KH
> : > : > : > : >
> : > : > : > : >
> : > : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > : >
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : > : >
> : > : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left
> front
> : > lower
> : > : > pin
> : > : > : > : >>WILL NOT come out! I've removed the header
> panel...fender...door
> : > for
> : > : > : > : >
> : > : > : > : > access
> : > : > : > : >
> : > : > : > : >>and no luck. I ended up cutting the pin from the hinge but
> the
> : > top
> : > : > and
> : > : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : > : >>
> : > : > : > : >>Tried beating it out in the vice... nothing
> : > : > : > : >>Tried drilling it out in the drill press... not even
> scratching
> : > it.
> : > : > : > : >>
> : > : > : > : >>I'm going to try some heat tomorrow but I have a feeling
> I'll be
> : > : > : > ordering
> : > : > : > : >
> : > : > : > : > a
> : > : > : > : >
> : > : > : > : >>new hinge. Damn 20 minute job will have me out of commission
> for
> : > : > days!
> : > : > : > : >>
> : > : > : > : >>-Brian
> : > : > : > : >>
> : > : > : > : >>
> : > : > : > : >>
> : > : > : > : >
> : > : > : > : >
> : > : > : > : >
> : > : > : > :
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>

 

Not a problem. The pricing structures changed in the summer/fall so
it's more uniform now. I'm glad you're happy. If you ever want to buy
something pricey there let me know and I can tell you what range you
should be paying.

Mort

Cherokee-LTD wrote:
> Hey Mort,
> Picked up some PB today from the Clark Rd. store. $6.40 for 12oz can. Bought
> some other items as well, the Manager (Mike Overholt) was VERY helpful and I
> think he was giving me trade prices.
>
> 4 cans of PB
> 5 recip-saw metal blades
> 1 4.5" cutting disc
> 1 chipping (welding) hammer
> Just over $60 tax included.
>
> This was a much better experience than my first visit... I was getting the
> "if you have to ask how much it is...." type of attitude and I think the guy
> was making up prices on-the-fly. With Mike, I'd ask for a price and he'd ask
> "how many?".
>
> Thanks for mentioning Fastenal, I'll be shopping there more often.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:gilcc.20107$n37.1566009@read2.cgocable.net...
> : $7.52/can is about what you should be paying. I hope this helps. If
> : they try to charge you more tell them that you pay less when you deal
> : with other locations.
> :
> : Cherokee-LTD wrote:
> : > Mort,
> : > Thanks for pointing out the Midpark address... it's only about two miles
> : > from me. Is that a new location? It's about the same distance as
> Brafasco
> : > and closer than Facca for me. I'll wait for your price quote and head
> : > over... the price comparison may give me an indication of the pricing
> : > tendency. I found the Clark Rd. store to be roughly 10% higher across
> the
> : > board than Brafasco.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : > : There should be 2 locations in London. One is at 500 Clarke Road and
> : > : the other is at 105 Midpark Rd. Hope this helps. I can get you a
> price
> : > : of what you should be paying on Monday. I know some stores hike
> prices
> : > : for walk-ins but if you ask for a certain price they will usually give
> : > : it to you.
> : > : Mort
> : > :
> : > : Cherokee-LTD wrote:
> : > : > I'm in London south, they're in the upper east side of the city.
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : > : Where do you live?
> : > : > :
> : > : > : Cherokee-LTD wrote:
> : > : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> : > they're
> : > : > across
> : > : > : > the city 2. they're not competitive price-wise. I'm more than
> : > willing to
> : > : > go
> : > : > : > out of my way and pay a bit extra for PB... everybody swears by
> it
> : > in
> : > : > here
> : > : > : > but nobody in town has ever heard of it (or at least they say so
> and
> : > : > then
> : > : > : > push their product).
> : > : > : > -Brian
> : > : > : >
> : > : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a
> list
> : > of
> : > : > : > : Canadian locations
> : > : > : > :
> : > : > : > : Kevin in San Diego wrote:
> : > : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> : > penetrating
> : > : > oil
> : > : > : > : > like pb blaster?
> : > : > : > : > KH
> : > : > : > : >
> : > : > : > : >
> : > : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > : >
> news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : > : >
> : > : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left
> front
> : > lower
> : > : > pin
> : > : > : > : >>WILL NOT come out! I've removed the header
> panel...fender...door
> : > for
> : > : > : > : >
> : > : > : > : > access
> : > : > : > : >
> : > : > : > : >>and no luck. I ended up cutting the pin from the hinge but
> the
> : > top
> : > : > and
> : > : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : > : >>
> : > : > : > : >>Tried beating it out in the vice... nothing
> : > : > : > : >>Tried drilling it out in the drill press... not even
> scratching
> : > it.
> : > : > : > : >>
> : > : > : > : >>I'm going to try some heat tomorrow but I have a feeling
> I'll be
> : > : > : > ordering
> : > : > : > : >
> : > : > : > : > a
> : > : > : > : >
> : > : > : > : >>new hinge. Damn 20 minute job will have me out of commission
> for
> : > : > days!
> : > : > : > : >>
> : > : > : > : >>-Brian
> : > : > : > : >>
> : > : > : > : >>
> : > : > : > : >>
> : > : > : > : >
> : > : > : > : >
> : > : > : > : >
> : > : > : > :
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>

 

"Cherokee-LTD" <spammenot@home.com> wrote in message news:<cTGbc.25494$
> Why would I do that?
> If I was faced with this task again, I would do it the same way. The pin and
> bushing cost $17. A new hinge kit with pin is over $100 from the dealer. The
> only thing I would do different is not wasting my time trying to get the pin
> out without torches.
> -Brian

Hi Brian - I went through this a couple of years ago, with about the
same struggle you had. Finally sawed partway through one section of
the hinge in a spot where the weight of the door wouldn't cause
problems, drove a chisel into the sawcut, and got the remains of the
pin out. However, I could *not* get the factory hinge pin set to
install properly, even in a hinge which I didn't use the saw on -
there's a sort of plastic or wire mesh sleeve included, which I
demolish trying to insert it, and without it, there's too much
clearance between the pin and the bushings. But! What I wound up using
was even cheaper (versus welding on whole new hinges - why would you
buy a new hinge assembly, when all you need is a pin?) - steel roll
pins (spring pins)! Can't recall the length and diameter offhand, but
that's what was in there before I started the job, and that's what was
in there when I finished. Cost = about $2 at Canadian Tire. Been
working just fine ever since.

John Thompson

 

"Cherokee-LTD" <spammenot@home.com> wrote in message news:<cTGbc.25494$
> Why would I do that?
> If I was faced with this task again, I would do it the same way. The pin and
> bushing cost $17. A new hinge kit with pin is over $100 from the dealer. The
> only thing I would do different is not wasting my time trying to get the pin
> out without torches.
> -Brian

Hi Brian - I went through this a couple of years ago, with about the
same struggle you had. Finally sawed partway through one section of
the hinge in a spot where the weight of the door wouldn't cause
problems, drove a chisel into the sawcut, and got the remains of the
pin out. However, I could *not* get the factory hinge pin set to
install properly, even in a hinge which I didn't use the saw on -
there's a sort of plastic or wire mesh sleeve included, which I
demolish trying to insert it, and without it, there's too much
clearance between the pin and the bushings. But! What I wound up using
was even cheaper (versus welding on whole new hinges - why would you
buy a new hinge assembly, when all you need is a pin?) - steel roll
pins (spring pins)! Can't recall the length and diameter offhand, but
that's what was in there before I started the job, and that's what was
in there when I finished. Cost = about $2 at Canadian Tire. Been
working just fine ever since.

John Thompson

 

"Cherokee-LTD" <spammenot@home.com> wrote in message news:<cTGbc.25494$
> Why would I do that?
> If I was faced with this task again, I would do it the same way. The pin and
> bushing cost $17. A new hinge kit with pin is over $100 from the dealer. The
> only thing I would do different is not wasting my time trying to get the pin
> out without torches.
> -Brian

Hi Brian - I went through this a couple of years ago, with about the
same struggle you had. Finally sawed partway through one section of
the hinge in a spot where the weight of the door wouldn't cause
problems, drove a chisel into the sawcut, and got the remains of the
pin out. However, I could *not* get the factory hinge pin set to
install properly, even in a hinge which I didn't use the saw on -
there's a sort of plastic or wire mesh sleeve included, which I
demolish trying to insert it, and without it, there's too much
clearance between the pin and the bushings. But! What I wound up using
was even cheaper (versus welding on whole new hinges - why would you
buy a new hinge assembly, when all you need is a pin?) - steel roll
pins (spring pins)! Can't recall the length and diameter offhand, but
that's what was in there before I started the job, and that's what was
in there when I finished. Cost = about $2 at Canadian Tire. Been
working just fine ever since.

John Thompson

 

"Cherokee-LTD" <spammenot@home.com> wrote in message news:<cTGbc.25494$
> Why would I do that?
> If I was faced with this task again, I would do it the same way. The pin and
> bushing cost $17. A new hinge kit with pin is over $100 from the dealer. The
> only thing I would do different is not wasting my time trying to get the pin
> out without torches.
> -Brian

Hi Brian - I went through this a couple of years ago, with about the
same struggle you had. Finally sawed partway through one section of
the hinge in a spot where the weight of the door wouldn't cause
problems, drove a chisel into the sawcut, and got the remains of the
pin out. However, I could *not* get the factory hinge pin set to
install properly, even in a hinge which I didn't use the saw on -
there's a sort of plastic or wire mesh sleeve included, which I
demolish trying to insert it, and without it, there's too much
clearance between the pin and the bushings. But! What I wound up using
was even cheaper (versus welding on whole new hinges - why would you
buy a new hinge assembly, when all you need is a pin?) - steel roll
pins (spring pins)! Can't recall the length and diameter offhand, but
that's what was in there before I started the job, and that's what was
in there when I finished. Cost = about $2 at Canadian Tire. Been
working just fine ever since.

John Thompson

 

I bet you're out there oiling them now.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

John Thompson wrote:
>
> Hi Brian - I went through this a couple of years ago, with about the
> same struggle you had. Finally sawed partway through one section of
> the hinge in a spot where the weight of the door wouldn't cause
> problems, drove a chisel into the sawcut, and got the remains of the
> pin out. However, I could *not* get the factory hinge pin set to
> install properly, even in a hinge which I didn't use the saw on -
> there's a sort of plastic or wire mesh sleeve included, which I
> demolish trying to insert it, and without it, there's too much
> clearance between the pin and the bushings. But! What I wound up using
> was even cheaper (versus welding on whole new hinges - why would you
> buy a new hinge assembly, when all you need is a pin?) - steel roll
> pins (spring pins)! Can't recall the length and diameter offhand, but
> that's what was in there before I started the job, and that's what was
> in there when I finished. Cost = about $2 at Canadian Tire. Been
> working just fine ever since.
>
> John Thompson