XJ Door Hinge - I'm in trouble!
04-03-2004, 03:22 PM
#31
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Where do you live?
Cherokee-LTD wrote:
> Thanks Mort - I never thought to try them for two reasons. 1. they're across
> the city 2. they're not competitive price-wise. I'm more than willing to go
> out of my way and pay a bit extra for PB... everybody swears by it in here
> but nobody in town has ever heard of it (or at least they say so and then
> push their product).
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : You can buy PB Blaster in Canada visit www.fastenal.com for a list of
> : Canadian locations
> :
> : Kevin in San Diego wrote:
> : > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> : > like pb blaster?
> : > KH
> : >
> : >
> : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : >
> : >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> : >>WILL NOT come out! I've removed the header panel...fender...door for
> : >
> : > access
> : >
> : >>and no luck. I ended up cutting the pin from the hinge but the top and
> : >>bottom is still stuck in there... any ideas?
> : >>
> : >>Tried beating it out in the vice... nothing
> : >>Tried drilling it out in the drill press... not even scratching it.
> : >>
> : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> ordering
> : >
> : > a
> : >
> : >>new hinge. Damn 20 minute job will have me out of commission for days!
> : >>
> : >>-Brian
> : >>
> : >>
> : >>
> : >
> : >
> : >
> :
>
>
Cherokee-LTD wrote:
> Thanks Mort - I never thought to try them for two reasons. 1. they're across
> the city 2. they're not competitive price-wise. I'm more than willing to go
> out of my way and pay a bit extra for PB... everybody swears by it in here
> but nobody in town has ever heard of it (or at least they say so and then
> push their product).
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : You can buy PB Blaster in Canada visit www.fastenal.com for a list of
> : Canadian locations
> :
> : Kevin in San Diego wrote:
> : > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> : > like pb blaster?
> : > KH
> : >
> : >
> : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : >
> : >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> : >>WILL NOT come out! I've removed the header panel...fender...door for
> : >
> : > access
> : >
> : >>and no luck. I ended up cutting the pin from the hinge but the top and
> : >>bottom is still stuck in there... any ideas?
> : >>
> : >>Tried beating it out in the vice... nothing
> : >>Tried drilling it out in the drill press... not even scratching it.
> : >>
> : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> ordering
> : >
> : > a
> : >
> : >>new hinge. Damn 20 minute job will have me out of commission for days!
> : >>
> : >>-Brian
> : >>
> : >>
> : >>
> : >
> : >
> : >
> :
>
>
04-03-2004, 03:22 PM
#32
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Where do you live?
Cherokee-LTD wrote:
> Thanks Mort - I never thought to try them for two reasons. 1. they're across
> the city 2. they're not competitive price-wise. I'm more than willing to go
> out of my way and pay a bit extra for PB... everybody swears by it in here
> but nobody in town has ever heard of it (or at least they say so and then
> push their product).
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : You can buy PB Blaster in Canada visit www.fastenal.com for a list of
> : Canadian locations
> :
> : Kevin in San Diego wrote:
> : > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> : > like pb blaster?
> : > KH
> : >
> : >
> : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : >
> : >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> : >>WILL NOT come out! I've removed the header panel...fender...door for
> : >
> : > access
> : >
> : >>and no luck. I ended up cutting the pin from the hinge but the top and
> : >>bottom is still stuck in there... any ideas?
> : >>
> : >>Tried beating it out in the vice... nothing
> : >>Tried drilling it out in the drill press... not even scratching it.
> : >>
> : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> ordering
> : >
> : > a
> : >
> : >>new hinge. Damn 20 minute job will have me out of commission for days!
> : >>
> : >>-Brian
> : >>
> : >>
> : >>
> : >
> : >
> : >
> :
>
>
Cherokee-LTD wrote:
> Thanks Mort - I never thought to try them for two reasons. 1. they're across
> the city 2. they're not competitive price-wise. I'm more than willing to go
> out of my way and pay a bit extra for PB... everybody swears by it in here
> but nobody in town has ever heard of it (or at least they say so and then
> push their product).
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : You can buy PB Blaster in Canada visit www.fastenal.com for a list of
> : Canadian locations
> :
> : Kevin in San Diego wrote:
> : > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> : > like pb blaster?
> : > KH
> : >
> : >
> : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : >
> : >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> : >>WILL NOT come out! I've removed the header panel...fender...door for
> : >
> : > access
> : >
> : >>and no luck. I ended up cutting the pin from the hinge but the top and
> : >>bottom is still stuck in there... any ideas?
> : >>
> : >>Tried beating it out in the vice... nothing
> : >>Tried drilling it out in the drill press... not even scratching it.
> : >>
> : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> ordering
> : >
> : > a
> : >
> : >>new hinge. Damn 20 minute job will have me out of commission for days!
> : >>
> : >>-Brian
> : >>
> : >>
> : >>
> : >
> : >
> : >
> :
>
>
04-03-2004, 03:22 PM
#33
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Where do you live?
Cherokee-LTD wrote:
> Thanks Mort - I never thought to try them for two reasons. 1. they're across
> the city 2. they're not competitive price-wise. I'm more than willing to go
> out of my way and pay a bit extra for PB... everybody swears by it in here
> but nobody in town has ever heard of it (or at least they say so and then
> push their product).
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : You can buy PB Blaster in Canada visit www.fastenal.com for a list of
> : Canadian locations
> :
> : Kevin in San Diego wrote:
> : > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> : > like pb blaster?
> : > KH
> : >
> : >
> : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : >
> : >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> : >>WILL NOT come out! I've removed the header panel...fender...door for
> : >
> : > access
> : >
> : >>and no luck. I ended up cutting the pin from the hinge but the top and
> : >>bottom is still stuck in there... any ideas?
> : >>
> : >>Tried beating it out in the vice... nothing
> : >>Tried drilling it out in the drill press... not even scratching it.
> : >>
> : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> ordering
> : >
> : > a
> : >
> : >>new hinge. Damn 20 minute job will have me out of commission for days!
> : >>
> : >>-Brian
> : >>
> : >>
> : >>
> : >
> : >
> : >
> :
>
>
Cherokee-LTD wrote:
> Thanks Mort - I never thought to try them for two reasons. 1. they're across
> the city 2. they're not competitive price-wise. I'm more than willing to go
> out of my way and pay a bit extra for PB... everybody swears by it in here
> but nobody in town has ever heard of it (or at least they say so and then
> push their product).
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : You can buy PB Blaster in Canada visit www.fastenal.com for a list of
> : Canadian locations
> :
> : Kevin in San Diego wrote:
> : > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
> : > like pb blaster?
> : > KH
> : >
> : >
> : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : >
> : >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
> : >>WILL NOT come out! I've removed the header panel...fender...door for
> : >
> : > access
> : >
> : >>and no luck. I ended up cutting the pin from the hinge but the top and
> : >>bottom is still stuck in there... any ideas?
> : >>
> : >>Tried beating it out in the vice... nothing
> : >>Tried drilling it out in the drill press... not even scratching it.
> : >>
> : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> ordering
> : >
> : > a
> : >
> : >>new hinge. Damn 20 minute job will have me out of commission for days!
> : >>
> : >>-Brian
> : >>
> : >>
> : >>
> : >
> : >
> : >
> :
>
>
04-03-2004, 03:23 PM
#34
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Thanks Mort - I never thought to try them for two reasons. 1. they're across
the city 2. they're not competitive price-wise. I'm more than willing to go
out of my way and pay a bit extra for PB... everybody swears by it in here
but nobody in town has ever heard of it (or at least they say so and then
push their product).
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: You can buy PB Blaster in Canada visit www.fastenal.com for a list of
: Canadian locations
:
: Kevin in San Diego wrote:
: > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: > like pb blaster?
: > KH
: >
: >
: > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: >
: >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: >>WILL NOT come out! I've removed the header panel...fender...door for
: >
: > access
: >
: >>and no luck. I ended up cutting the pin from the hinge but the top and
: >>bottom is still stuck in there... any ideas?
: >>
: >>Tried beating it out in the vice... nothing
: >>Tried drilling it out in the drill press... not even scratching it.
: >>
: >>I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: >
: > a
: >
: >>new hinge. Damn 20 minute job will have me out of commission for days!
: >>
: >>-Brian
: >>
: >>
: >>
: >
: >
: >
:
the city 2. they're not competitive price-wise. I'm more than willing to go
out of my way and pay a bit extra for PB... everybody swears by it in here
but nobody in town has ever heard of it (or at least they say so and then
push their product).
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: You can buy PB Blaster in Canada visit www.fastenal.com for a list of
: Canadian locations
:
: Kevin in San Diego wrote:
: > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: > like pb blaster?
: > KH
: >
: >
: > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: >
: >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: >>WILL NOT come out! I've removed the header panel...fender...door for
: >
: > access
: >
: >>and no luck. I ended up cutting the pin from the hinge but the top and
: >>bottom is still stuck in there... any ideas?
: >>
: >>Tried beating it out in the vice... nothing
: >>Tried drilling it out in the drill press... not even scratching it.
: >>
: >>I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: >
: > a
: >
: >>new hinge. Damn 20 minute job will have me out of commission for days!
: >>
: >>-Brian
: >>
: >>
: >>
: >
: >
: >
:
04-03-2004, 03:23 PM
#35
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Thanks Mort - I never thought to try them for two reasons. 1. they're across
the city 2. they're not competitive price-wise. I'm more than willing to go
out of my way and pay a bit extra for PB... everybody swears by it in here
but nobody in town has ever heard of it (or at least they say so and then
push their product).
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: You can buy PB Blaster in Canada visit www.fastenal.com for a list of
: Canadian locations
:
: Kevin in San Diego wrote:
: > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: > like pb blaster?
: > KH
: >
: >
: > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: >
: >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: >>WILL NOT come out! I've removed the header panel...fender...door for
: >
: > access
: >
: >>and no luck. I ended up cutting the pin from the hinge but the top and
: >>bottom is still stuck in there... any ideas?
: >>
: >>Tried beating it out in the vice... nothing
: >>Tried drilling it out in the drill press... not even scratching it.
: >>
: >>I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: >
: > a
: >
: >>new hinge. Damn 20 minute job will have me out of commission for days!
: >>
: >>-Brian
: >>
: >>
: >>
: >
: >
: >
:
the city 2. they're not competitive price-wise. I'm more than willing to go
out of my way and pay a bit extra for PB... everybody swears by it in here
but nobody in town has ever heard of it (or at least they say so and then
push their product).
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: You can buy PB Blaster in Canada visit www.fastenal.com for a list of
: Canadian locations
:
: Kevin in San Diego wrote:
: > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: > like pb blaster?
: > KH
: >
: >
: > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: >
: >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: >>WILL NOT come out! I've removed the header panel...fender...door for
: >
: > access
: >
: >>and no luck. I ended up cutting the pin from the hinge but the top and
: >>bottom is still stuck in there... any ideas?
: >>
: >>Tried beating it out in the vice... nothing
: >>Tried drilling it out in the drill press... not even scratching it.
: >>
: >>I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: >
: > a
: >
: >>new hinge. Damn 20 minute job will have me out of commission for days!
: >>
: >>-Brian
: >>
: >>
: >>
: >
: >
: >
:
04-03-2004, 03:23 PM
#36
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Thanks Mort - I never thought to try them for two reasons. 1. they're across
the city 2. they're not competitive price-wise. I'm more than willing to go
out of my way and pay a bit extra for PB... everybody swears by it in here
but nobody in town has ever heard of it (or at least they say so and then
push their product).
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: You can buy PB Blaster in Canada visit www.fastenal.com for a list of
: Canadian locations
:
: Kevin in San Diego wrote:
: > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: > like pb blaster?
: > KH
: >
: >
: > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: >
: >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: >>WILL NOT come out! I've removed the header panel...fender...door for
: >
: > access
: >
: >>and no luck. I ended up cutting the pin from the hinge but the top and
: >>bottom is still stuck in there... any ideas?
: >>
: >>Tried beating it out in the vice... nothing
: >>Tried drilling it out in the drill press... not even scratching it.
: >>
: >>I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: >
: > a
: >
: >>new hinge. Damn 20 minute job will have me out of commission for days!
: >>
: >>-Brian
: >>
: >>
: >>
: >
: >
: >
:
the city 2. they're not competitive price-wise. I'm more than willing to go
out of my way and pay a bit extra for PB... everybody swears by it in here
but nobody in town has ever heard of it (or at least they say so and then
push their product).
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: You can buy PB Blaster in Canada visit www.fastenal.com for a list of
: Canadian locations
:
: Kevin in San Diego wrote:
: > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: > like pb blaster?
: > KH
: >
: >
: > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: >
: >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: >>WILL NOT come out! I've removed the header panel...fender...door for
: >
: > access
: >
: >>and no luck. I ended up cutting the pin from the hinge but the top and
: >>bottom is still stuck in there... any ideas?
: >>
: >>Tried beating it out in the vice... nothing
: >>Tried drilling it out in the drill press... not even scratching it.
: >>
: >>I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: >
: > a
: >
: >>new hinge. Damn 20 minute job will have me out of commission for days!
: >>
: >>-Brian
: >>
: >>
: >>
: >
: >
: >
:
04-03-2004, 03:23 PM
#37
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Thanks Mort - I never thought to try them for two reasons. 1. they're across
the city 2. they're not competitive price-wise. I'm more than willing to go
out of my way and pay a bit extra for PB... everybody swears by it in here
but nobody in town has ever heard of it (or at least they say so and then
push their product).
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: You can buy PB Blaster in Canada visit www.fastenal.com for a list of
: Canadian locations
:
: Kevin in San Diego wrote:
: > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: > like pb blaster?
: > KH
: >
: >
: > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: >
: >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: >>WILL NOT come out! I've removed the header panel...fender...door for
: >
: > access
: >
: >>and no luck. I ended up cutting the pin from the hinge but the top and
: >>bottom is still stuck in there... any ideas?
: >>
: >>Tried beating it out in the vice... nothing
: >>Tried drilling it out in the drill press... not even scratching it.
: >>
: >>I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: >
: > a
: >
: >>new hinge. Damn 20 minute job will have me out of commission for days!
: >>
: >>-Brian
: >>
: >>
: >>
: >
: >
: >
:
the city 2. they're not competitive price-wise. I'm more than willing to go
out of my way and pay a bit extra for PB... everybody swears by it in here
but nobody in town has ever heard of it (or at least they say so and then
push their product).
-Brian
"Mort" <jmorton@on.aibn.nospamcom> wrote in message
news:VkDbc.19562$n37.1475652@read2.cgocable.net...
: You can buy PB Blaster in Canada visit www.fastenal.com for a list of
: Canadian locations
:
: Kevin in San Diego wrote:
: > LOL Brian, good luck. Did you try soaking it in a vat of penetrating oil
: > like pb blaster?
: > KH
: >
: >
: > "Cherokee-LTD" <spammenot@home.com> wrote in message
: > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: >
: >>I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: >>WILL NOT come out! I've removed the header panel...fender...door for
: >
: > access
: >
: >>and no luck. I ended up cutting the pin from the hinge but the top and
: >>bottom is still stuck in there... any ideas?
: >>
: >>Tried beating it out in the vice... nothing
: >>Tried drilling it out in the drill press... not even scratching it.
: >>
: >>I'm going to try some heat tomorrow but I have a feeling I'll be
ordering
: >
: > a
: >
: >>new hinge. Damn 20 minute job will have me out of commission for days!
: >>
: >>-Brian
: >>
: >>
: >>
: >
: >
: >
:
04-03-2004, 03:29 PM
#38
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Blue wrench to the rescue. Tried propane on but couldn't get it hot enough.
Took the hinge down the street to a local machine shop... he tried drilling
it out, no luck. Put the torches to it til it was cherry and beat the bin
out with a punch. Bent the punch too! Everything is back together and I'm
going to leak test the door at the car wash.
Thanks for the ideas guys!
-Brian
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: WILL NOT come out! I've removed the header panel...fender...door for
access
: and no luck. I ended up cutting the pin from the hinge but the top and
: bottom is still stuck in there... any ideas?
:
: Tried beating it out in the vice... nothing
: Tried drilling it out in the drill press... not even scratching it.
:
: I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
: new hinge. Damn 20 minute job will have me out of commission for days!
:
: -Brian
:
:
:
Took the hinge down the street to a local machine shop... he tried drilling
it out, no luck. Put the torches to it til it was cherry and beat the bin
out with a punch. Bent the punch too! Everything is back together and I'm
going to leak test the door at the car wash.
Thanks for the ideas guys!
-Brian
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: WILL NOT come out! I've removed the header panel...fender...door for
access
: and no luck. I ended up cutting the pin from the hinge but the top and
: bottom is still stuck in there... any ideas?
:
: Tried beating it out in the vice... nothing
: Tried drilling it out in the drill press... not even scratching it.
:
: I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
: new hinge. Damn 20 minute job will have me out of commission for days!
:
: -Brian
:
:
:
04-03-2004, 03:29 PM
#39
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Blue wrench to the rescue. Tried propane on but couldn't get it hot enough.
Took the hinge down the street to a local machine shop... he tried drilling
it out, no luck. Put the torches to it til it was cherry and beat the bin
out with a punch. Bent the punch too! Everything is back together and I'm
going to leak test the door at the car wash.
Thanks for the ideas guys!
-Brian
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: WILL NOT come out! I've removed the header panel...fender...door for
access
: and no luck. I ended up cutting the pin from the hinge but the top and
: bottom is still stuck in there... any ideas?
:
: Tried beating it out in the vice... nothing
: Tried drilling it out in the drill press... not even scratching it.
:
: I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
: new hinge. Damn 20 minute job will have me out of commission for days!
:
: -Brian
:
:
:
Took the hinge down the street to a local machine shop... he tried drilling
it out, no luck. Put the torches to it til it was cherry and beat the bin
out with a punch. Bent the punch too! Everything is back together and I'm
going to leak test the door at the car wash.
Thanks for the ideas guys!
-Brian
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: WILL NOT come out! I've removed the header panel...fender...door for
access
: and no luck. I ended up cutting the pin from the hinge but the top and
: bottom is still stuck in there... any ideas?
:
: Tried beating it out in the vice... nothing
: Tried drilling it out in the drill press... not even scratching it.
:
: I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
: new hinge. Damn 20 minute job will have me out of commission for days!
:
: -Brian
:
:
:
04-03-2004, 03:29 PM
#40
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Blue wrench to the rescue. Tried propane on but couldn't get it hot enough.
Took the hinge down the street to a local machine shop... he tried drilling
it out, no luck. Put the torches to it til it was cherry and beat the bin
out with a punch. Bent the punch too! Everything is back together and I'm
going to leak test the door at the car wash.
Thanks for the ideas guys!
-Brian
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: WILL NOT come out! I've removed the header panel...fender...door for
access
: and no luck. I ended up cutting the pin from the hinge but the top and
: bottom is still stuck in there... any ideas?
:
: Tried beating it out in the vice... nothing
: Tried drilling it out in the drill press... not even scratching it.
:
: I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
: new hinge. Damn 20 minute job will have me out of commission for days!
:
: -Brian
:
:
:
Took the hinge down the street to a local machine shop... he tried drilling
it out, no luck. Put the torches to it til it was cherry and beat the bin
out with a punch. Bent the punch too! Everything is back together and I'm
going to leak test the door at the car wash.
Thanks for the ideas guys!
-Brian
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
: I'm trying to replace the hinge pin on my '92 XJ... left front lower pin
: WILL NOT come out! I've removed the header panel...fender...door for
access
: and no luck. I ended up cutting the pin from the hinge but the top and
: bottom is still stuck in there... any ideas?
:
: Tried beating it out in the vice... nothing
: Tried drilling it out in the drill press... not even scratching it.
:
: I'm going to try some heat tomorrow but I have a feeling I'll be ordering
a
: new hinge. Damn 20 minute job will have me out of commission for days!
:
: -Brian
:
:
: