XJ Door Hinge - I'm in trouble!
04-04-2004, 12:18 AM
#81
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:TuKbc.18598$Rh.13309@fed1read05...
: I imagine they dont sell a lot of loctite there lol.
: KH
:
On the downside, anti-seize is trading for $426.00 US/ounce.
-Brian
04-04-2004, 10:42 AM
#82
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Actually I use a lot of the stuff and a lot of antiseize compound. Both
will keep the salt off the threads.
Mike
Kevin in San Diego wrote:
>
> I imagine they dont sell a lot of loctite there lol.
> KH
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:406F2266.44BC5F3F@sympatico.ca...
> > : Don't ya just love the 'extras' of living in the salt belt....
> > : ;-)
> > :
> > Don't you know it!!!
> > The only benefit is that when you install something you don't have to
> > re-torque a week later, it's already rusted in place. I can't wait until I
> > do the lift kit (it's in the garage waiting for me now)... I suspect I
> will
> > be exercising the lifetime warranty on my Torx sockets.
> > -Brian
> >
> >
will keep the salt off the threads.
Mike
Kevin in San Diego wrote:
>
> I imagine they dont sell a lot of loctite there lol.
> KH
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:406F2266.44BC5F3F@sympatico.ca...
> > : Don't ya just love the 'extras' of living in the salt belt....
> > : ;-)
> > :
> > Don't you know it!!!
> > The only benefit is that when you install something you don't have to
> > re-torque a week later, it's already rusted in place. I can't wait until I
> > do the lift kit (it's in the garage waiting for me now)... I suspect I
> will
> > be exercising the lifetime warranty on my Torx sockets.
> > -Brian
> >
> >
04-04-2004, 10:42 AM
#83
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Actually I use a lot of the stuff and a lot of antiseize compound. Both
will keep the salt off the threads.
Mike
Kevin in San Diego wrote:
>
> I imagine they dont sell a lot of loctite there lol.
> KH
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:406F2266.44BC5F3F@sympatico.ca...
> > : Don't ya just love the 'extras' of living in the salt belt....
> > : ;-)
> > :
> > Don't you know it!!!
> > The only benefit is that when you install something you don't have to
> > re-torque a week later, it's already rusted in place. I can't wait until I
> > do the lift kit (it's in the garage waiting for me now)... I suspect I
> will
> > be exercising the lifetime warranty on my Torx sockets.
> > -Brian
> >
> >
will keep the salt off the threads.
Mike
Kevin in San Diego wrote:
>
> I imagine they dont sell a lot of loctite there lol.
> KH
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:406F2266.44BC5F3F@sympatico.ca...
> > : Don't ya just love the 'extras' of living in the salt belt....
> > : ;-)
> > :
> > Don't you know it!!!
> > The only benefit is that when you install something you don't have to
> > re-torque a week later, it's already rusted in place. I can't wait until I
> > do the lift kit (it's in the garage waiting for me now)... I suspect I
> will
> > be exercising the lifetime warranty on my Torx sockets.
> > -Brian
> >
> >
04-04-2004, 10:42 AM
#84
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Actually I use a lot of the stuff and a lot of antiseize compound. Both
will keep the salt off the threads.
Mike
Kevin in San Diego wrote:
>
> I imagine they dont sell a lot of loctite there lol.
> KH
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:406F2266.44BC5F3F@sympatico.ca...
> > : Don't ya just love the 'extras' of living in the salt belt....
> > : ;-)
> > :
> > Don't you know it!!!
> > The only benefit is that when you install something you don't have to
> > re-torque a week later, it's already rusted in place. I can't wait until I
> > do the lift kit (it's in the garage waiting for me now)... I suspect I
> will
> > be exercising the lifetime warranty on my Torx sockets.
> > -Brian
> >
> >
will keep the salt off the threads.
Mike
Kevin in San Diego wrote:
>
> I imagine they dont sell a lot of loctite there lol.
> KH
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:406F2266.44BC5F3F@sympatico.ca...
> > : Don't ya just love the 'extras' of living in the salt belt....
> > : ;-)
> > :
> > Don't you know it!!!
> > The only benefit is that when you install something you don't have to
> > re-torque a week later, it's already rusted in place. I can't wait until I
> > do the lift kit (it's in the garage waiting for me now)... I suspect I
> will
> > be exercising the lifetime warranty on my Torx sockets.
> > -Brian
> >
> >
04-04-2004, 10:42 AM
#85
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
Actually I use a lot of the stuff and a lot of antiseize compound. Both
will keep the salt off the threads.
Mike
Kevin in San Diego wrote:
>
> I imagine they dont sell a lot of loctite there lol.
> KH
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:406F2266.44BC5F3F@sympatico.ca...
> > : Don't ya just love the 'extras' of living in the salt belt....
> > : ;-)
> > :
> > Don't you know it!!!
> > The only benefit is that when you install something you don't have to
> > re-torque a week later, it's already rusted in place. I can't wait until I
> > do the lift kit (it's in the garage waiting for me now)... I suspect I
> will
> > be exercising the lifetime warranty on my Torx sockets.
> > -Brian
> >
> >
will keep the salt off the threads.
Mike
Kevin in San Diego wrote:
>
> I imagine they dont sell a lot of loctite there lol.
> KH
>
> "Cherokee-LTD" <spammenot@home.com> wrote in message
> news:lXGbc.25595$jVF.4263@news04.bloor.is.net.cabl e.rogers.com...
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:406F2266.44BC5F3F@sympatico.ca...
> > : Don't ya just love the 'extras' of living in the salt belt....
> > : ;-)
> > :
> > Don't you know it!!!
> > The only benefit is that when you install something you don't have to
> > re-torque a week later, it's already rusted in place. I can't wait until I
> > do the lift kit (it's in the garage waiting for me now)... I suspect I
> will
> > be exercising the lifetime warranty on my Torx sockets.
> > -Brian
> >
> >
04-04-2004, 05:53 PM
#86
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
The Midpark location is a newer location.
Cherokee-LTD wrote:
> Mort,
> Thanks for pointing out the Midpark address... it's only about two miles
> from me. Is that a new location? It's about the same distance as Brafasco
> and closer than Facca for me. I'll wait for your price quote and head
> over... the price comparison may give me an indication of the pricing
> tendency. I found the Clark Rd. store to be roughly 10% higher across the
> board than Brafasco.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : There should be 2 locations in London. One is at 500 Clarke Road and
> : the other is at 105 Midpark Rd. Hope this helps. I can get you a price
> : of what you should be paying on Monday. I know some stores hike prices
> : for walk-ins but if you ask for a certain price they will usually give
> : it to you.
> : Mort
> :
> : Cherokee-LTD wrote:
> : > I'm in London south, they're in the upper east side of the city.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : Where do you live?
> : > :
> : > : Cherokee-LTD wrote:
> : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> they're
> : > across
> : > : > the city 2. they're not competitive price-wise. I'm more than
> willing to
> : > go
> : > : > out of my way and pay a bit extra for PB... everybody swears by it
> in
> : > here
> : > : > but nobody in town has ever heard of it (or at least they say so and
> : > then
> : > : > push their product).
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
> of
> : > : > : Canadian locations
> : > : > :
> : > : > : Kevin in San Diego wrote:
> : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> penetrating
> : > oil
> : > : > : > like pb blaster?
> : > : > : > KH
> : > : > : >
> : > : > : >
> : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : >
> : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
> lower
> : > pin
> : > : > : >>WILL NOT come out! I've removed the header panel...fender...door
> for
> : > : > : >
> : > : > : > access
> : > : > : >
> : > : > : >>and no luck. I ended up cutting the pin from the hinge but the
> top
> : > and
> : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : >>
> : > : > : >>Tried beating it out in the vice... nothing
> : > : > : >>Tried drilling it out in the drill press... not even scratching
> it.
> : > : > : >>
> : > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> : > : > ordering
> : > : > : >
> : > : > : > a
> : > : > : >
> : > : > : >>new hinge. Damn 20 minute job will have me out of commission for
> : > days!
> : > : > : >>
> : > : > : >>-Brian
> : > : > : >>
> : > : > : >>
> : > : > : >>
> : > : > : >
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>
Cherokee-LTD wrote:
> Mort,
> Thanks for pointing out the Midpark address... it's only about two miles
> from me. Is that a new location? It's about the same distance as Brafasco
> and closer than Facca for me. I'll wait for your price quote and head
> over... the price comparison may give me an indication of the pricing
> tendency. I found the Clark Rd. store to be roughly 10% higher across the
> board than Brafasco.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : There should be 2 locations in London. One is at 500 Clarke Road and
> : the other is at 105 Midpark Rd. Hope this helps. I can get you a price
> : of what you should be paying on Monday. I know some stores hike prices
> : for walk-ins but if you ask for a certain price they will usually give
> : it to you.
> : Mort
> :
> : Cherokee-LTD wrote:
> : > I'm in London south, they're in the upper east side of the city.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : Where do you live?
> : > :
> : > : Cherokee-LTD wrote:
> : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> they're
> : > across
> : > : > the city 2. they're not competitive price-wise. I'm more than
> willing to
> : > go
> : > : > out of my way and pay a bit extra for PB... everybody swears by it
> in
> : > here
> : > : > but nobody in town has ever heard of it (or at least they say so and
> : > then
> : > : > push their product).
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
> of
> : > : > : Canadian locations
> : > : > :
> : > : > : Kevin in San Diego wrote:
> : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> penetrating
> : > oil
> : > : > : > like pb blaster?
> : > : > : > KH
> : > : > : >
> : > : > : >
> : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : >
> : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
> lower
> : > pin
> : > : > : >>WILL NOT come out! I've removed the header panel...fender...door
> for
> : > : > : >
> : > : > : > access
> : > : > : >
> : > : > : >>and no luck. I ended up cutting the pin from the hinge but the
> top
> : > and
> : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : >>
> : > : > : >>Tried beating it out in the vice... nothing
> : > : > : >>Tried drilling it out in the drill press... not even scratching
> it.
> : > : > : >>
> : > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> : > : > ordering
> : > : > : >
> : > : > : > a
> : > : > : >
> : > : > : >>new hinge. Damn 20 minute job will have me out of commission for
> : > days!
> : > : > : >>
> : > : > : >>-Brian
> : > : > : >>
> : > : > : >>
> : > : > : >>
> : > : > : >
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>
04-04-2004, 05:53 PM
#87
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
The Midpark location is a newer location.
Cherokee-LTD wrote:
> Mort,
> Thanks for pointing out the Midpark address... it's only about two miles
> from me. Is that a new location? It's about the same distance as Brafasco
> and closer than Facca for me. I'll wait for your price quote and head
> over... the price comparison may give me an indication of the pricing
> tendency. I found the Clark Rd. store to be roughly 10% higher across the
> board than Brafasco.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : There should be 2 locations in London. One is at 500 Clarke Road and
> : the other is at 105 Midpark Rd. Hope this helps. I can get you a price
> : of what you should be paying on Monday. I know some stores hike prices
> : for walk-ins but if you ask for a certain price they will usually give
> : it to you.
> : Mort
> :
> : Cherokee-LTD wrote:
> : > I'm in London south, they're in the upper east side of the city.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : Where do you live?
> : > :
> : > : Cherokee-LTD wrote:
> : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> they're
> : > across
> : > : > the city 2. they're not competitive price-wise. I'm more than
> willing to
> : > go
> : > : > out of my way and pay a bit extra for PB... everybody swears by it
> in
> : > here
> : > : > but nobody in town has ever heard of it (or at least they say so and
> : > then
> : > : > push their product).
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
> of
> : > : > : Canadian locations
> : > : > :
> : > : > : Kevin in San Diego wrote:
> : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> penetrating
> : > oil
> : > : > : > like pb blaster?
> : > : > : > KH
> : > : > : >
> : > : > : >
> : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : >
> : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
> lower
> : > pin
> : > : > : >>WILL NOT come out! I've removed the header panel...fender...door
> for
> : > : > : >
> : > : > : > access
> : > : > : >
> : > : > : >>and no luck. I ended up cutting the pin from the hinge but the
> top
> : > and
> : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : >>
> : > : > : >>Tried beating it out in the vice... nothing
> : > : > : >>Tried drilling it out in the drill press... not even scratching
> it.
> : > : > : >>
> : > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> : > : > ordering
> : > : > : >
> : > : > : > a
> : > : > : >
> : > : > : >>new hinge. Damn 20 minute job will have me out of commission for
> : > days!
> : > : > : >>
> : > : > : >>-Brian
> : > : > : >>
> : > : > : >>
> : > : > : >>
> : > : > : >
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>
Cherokee-LTD wrote:
> Mort,
> Thanks for pointing out the Midpark address... it's only about two miles
> from me. Is that a new location? It's about the same distance as Brafasco
> and closer than Facca for me. I'll wait for your price quote and head
> over... the price comparison may give me an indication of the pricing
> tendency. I found the Clark Rd. store to be roughly 10% higher across the
> board than Brafasco.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : There should be 2 locations in London. One is at 500 Clarke Road and
> : the other is at 105 Midpark Rd. Hope this helps. I can get you a price
> : of what you should be paying on Monday. I know some stores hike prices
> : for walk-ins but if you ask for a certain price they will usually give
> : it to you.
> : Mort
> :
> : Cherokee-LTD wrote:
> : > I'm in London south, they're in the upper east side of the city.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : Where do you live?
> : > :
> : > : Cherokee-LTD wrote:
> : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> they're
> : > across
> : > : > the city 2. they're not competitive price-wise. I'm more than
> willing to
> : > go
> : > : > out of my way and pay a bit extra for PB... everybody swears by it
> in
> : > here
> : > : > but nobody in town has ever heard of it (or at least they say so and
> : > then
> : > : > push their product).
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
> of
> : > : > : Canadian locations
> : > : > :
> : > : > : Kevin in San Diego wrote:
> : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> penetrating
> : > oil
> : > : > : > like pb blaster?
> : > : > : > KH
> : > : > : >
> : > : > : >
> : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : >
> : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
> lower
> : > pin
> : > : > : >>WILL NOT come out! I've removed the header panel...fender...door
> for
> : > : > : >
> : > : > : > access
> : > : > : >
> : > : > : >>and no luck. I ended up cutting the pin from the hinge but the
> top
> : > and
> : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : >>
> : > : > : >>Tried beating it out in the vice... nothing
> : > : > : >>Tried drilling it out in the drill press... not even scratching
> it.
> : > : > : >>
> : > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> : > : > ordering
> : > : > : >
> : > : > : > a
> : > : > : >
> : > : > : >>new hinge. Damn 20 minute job will have me out of commission for
> : > days!
> : > : > : >>
> : > : > : >>-Brian
> : > : > : >>
> : > : > : >>
> : > : > : >>
> : > : > : >
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>
04-04-2004, 05:53 PM
#88
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
The Midpark location is a newer location.
Cherokee-LTD wrote:
> Mort,
> Thanks for pointing out the Midpark address... it's only about two miles
> from me. Is that a new location? It's about the same distance as Brafasco
> and closer than Facca for me. I'll wait for your price quote and head
> over... the price comparison may give me an indication of the pricing
> tendency. I found the Clark Rd. store to be roughly 10% higher across the
> board than Brafasco.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : There should be 2 locations in London. One is at 500 Clarke Road and
> : the other is at 105 Midpark Rd. Hope this helps. I can get you a price
> : of what you should be paying on Monday. I know some stores hike prices
> : for walk-ins but if you ask for a certain price they will usually give
> : it to you.
> : Mort
> :
> : Cherokee-LTD wrote:
> : > I'm in London south, they're in the upper east side of the city.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : Where do you live?
> : > :
> : > : Cherokee-LTD wrote:
> : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> they're
> : > across
> : > : > the city 2. they're not competitive price-wise. I'm more than
> willing to
> : > go
> : > : > out of my way and pay a bit extra for PB... everybody swears by it
> in
> : > here
> : > : > but nobody in town has ever heard of it (or at least they say so and
> : > then
> : > : > push their product).
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
> of
> : > : > : Canadian locations
> : > : > :
> : > : > : Kevin in San Diego wrote:
> : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> penetrating
> : > oil
> : > : > : > like pb blaster?
> : > : > : > KH
> : > : > : >
> : > : > : >
> : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : >
> : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
> lower
> : > pin
> : > : > : >>WILL NOT come out! I've removed the header panel...fender...door
> for
> : > : > : >
> : > : > : > access
> : > : > : >
> : > : > : >>and no luck. I ended up cutting the pin from the hinge but the
> top
> : > and
> : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : >>
> : > : > : >>Tried beating it out in the vice... nothing
> : > : > : >>Tried drilling it out in the drill press... not even scratching
> it.
> : > : > : >>
> : > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> : > : > ordering
> : > : > : >
> : > : > : > a
> : > : > : >
> : > : > : >>new hinge. Damn 20 minute job will have me out of commission for
> : > days!
> : > : > : >>
> : > : > : >>-Brian
> : > : > : >>
> : > : > : >>
> : > : > : >>
> : > : > : >
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>
Cherokee-LTD wrote:
> Mort,
> Thanks for pointing out the Midpark address... it's only about two miles
> from me. Is that a new location? It's about the same distance as Brafasco
> and closer than Facca for me. I'll wait for your price quote and head
> over... the price comparison may give me an indication of the pricing
> tendency. I found the Clark Rd. store to be roughly 10% higher across the
> board than Brafasco.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : There should be 2 locations in London. One is at 500 Clarke Road and
> : the other is at 105 Midpark Rd. Hope this helps. I can get you a price
> : of what you should be paying on Monday. I know some stores hike prices
> : for walk-ins but if you ask for a certain price they will usually give
> : it to you.
> : Mort
> :
> : Cherokee-LTD wrote:
> : > I'm in London south, they're in the upper east side of the city.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : Where do you live?
> : > :
> : > : Cherokee-LTD wrote:
> : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> they're
> : > across
> : > : > the city 2. they're not competitive price-wise. I'm more than
> willing to
> : > go
> : > : > out of my way and pay a bit extra for PB... everybody swears by it
> in
> : > here
> : > : > but nobody in town has ever heard of it (or at least they say so and
> : > then
> : > : > push their product).
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
> of
> : > : > : Canadian locations
> : > : > :
> : > : > : Kevin in San Diego wrote:
> : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> penetrating
> : > oil
> : > : > : > like pb blaster?
> : > : > : > KH
> : > : > : >
> : > : > : >
> : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : >
> : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
> lower
> : > pin
> : > : > : >>WILL NOT come out! I've removed the header panel...fender...door
> for
> : > : > : >
> : > : > : > access
> : > : > : >
> : > : > : >>and no luck. I ended up cutting the pin from the hinge but the
> top
> : > and
> : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : >>
> : > : > : >>Tried beating it out in the vice... nothing
> : > : > : >>Tried drilling it out in the drill press... not even scratching
> it.
> : > : > : >>
> : > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> : > : > ordering
> : > : > : >
> : > : > : > a
> : > : > : >
> : > : > : >>new hinge. Damn 20 minute job will have me out of commission for
> : > days!
> : > : > : >>
> : > : > : >>-Brian
> : > : > : >>
> : > : > : >>
> : > : > : >>
> : > : > : >
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>
04-04-2004, 05:53 PM
#89
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
The Midpark location is a newer location.
Cherokee-LTD wrote:
> Mort,
> Thanks for pointing out the Midpark address... it's only about two miles
> from me. Is that a new location? It's about the same distance as Brafasco
> and closer than Facca for me. I'll wait for your price quote and head
> over... the price comparison may give me an indication of the pricing
> tendency. I found the Clark Rd. store to be roughly 10% higher across the
> board than Brafasco.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : There should be 2 locations in London. One is at 500 Clarke Road and
> : the other is at 105 Midpark Rd. Hope this helps. I can get you a price
> : of what you should be paying on Monday. I know some stores hike prices
> : for walk-ins but if you ask for a certain price they will usually give
> : it to you.
> : Mort
> :
> : Cherokee-LTD wrote:
> : > I'm in London south, they're in the upper east side of the city.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : Where do you live?
> : > :
> : > : Cherokee-LTD wrote:
> : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> they're
> : > across
> : > : > the city 2. they're not competitive price-wise. I'm more than
> willing to
> : > go
> : > : > out of my way and pay a bit extra for PB... everybody swears by it
> in
> : > here
> : > : > but nobody in town has ever heard of it (or at least they say so and
> : > then
> : > : > push their product).
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
> of
> : > : > : Canadian locations
> : > : > :
> : > : > : Kevin in San Diego wrote:
> : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> penetrating
> : > oil
> : > : > : > like pb blaster?
> : > : > : > KH
> : > : > : >
> : > : > : >
> : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : >
> : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
> lower
> : > pin
> : > : > : >>WILL NOT come out! I've removed the header panel...fender...door
> for
> : > : > : >
> : > : > : > access
> : > : > : >
> : > : > : >>and no luck. I ended up cutting the pin from the hinge but the
> top
> : > and
> : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : >>
> : > : > : >>Tried beating it out in the vice... nothing
> : > : > : >>Tried drilling it out in the drill press... not even scratching
> it.
> : > : > : >>
> : > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> : > : > ordering
> : > : > : >
> : > : > : > a
> : > : > : >
> : > : > : >>new hinge. Damn 20 minute job will have me out of commission for
> : > days!
> : > : > : >>
> : > : > : >>-Brian
> : > : > : >>
> : > : > : >>
> : > : > : >>
> : > : > : >
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>
Cherokee-LTD wrote:
> Mort,
> Thanks for pointing out the Midpark address... it's only about two miles
> from me. Is that a new location? It's about the same distance as Brafasco
> and closer than Facca for me. I'll wait for your price quote and head
> over... the price comparison may give me an indication of the pricing
> tendency. I found the Clark Rd. store to be roughly 10% higher across the
> board than Brafasco.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : There should be 2 locations in London. One is at 500 Clarke Road and
> : the other is at 105 Midpark Rd. Hope this helps. I can get you a price
> : of what you should be paying on Monday. I know some stores hike prices
> : for walk-ins but if you ask for a certain price they will usually give
> : it to you.
> : Mort
> :
> : Cherokee-LTD wrote:
> : > I'm in London south, they're in the upper east side of the city.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : Where do you live?
> : > :
> : > : Cherokee-LTD wrote:
> : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> they're
> : > across
> : > : > the city 2. they're not competitive price-wise. I'm more than
> willing to
> : > go
> : > : > out of my way and pay a bit extra for PB... everybody swears by it
> in
> : > here
> : > : > but nobody in town has ever heard of it (or at least they say so and
> : > then
> : > : > push their product).
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
> of
> : > : > : Canadian locations
> : > : > :
> : > : > : Kevin in San Diego wrote:
> : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> penetrating
> : > oil
> : > : > : > like pb blaster?
> : > : > : > KH
> : > : > : >
> : > : > : >
> : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : >
> : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
> lower
> : > pin
> : > : > : >>WILL NOT come out! I've removed the header panel...fender...door
> for
> : > : > : >
> : > : > : > access
> : > : > : >
> : > : > : >>and no luck. I ended up cutting the pin from the hinge but the
> top
> : > and
> : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : >>
> : > : > : >>Tried beating it out in the vice... nothing
> : > : > : >>Tried drilling it out in the drill press... not even scratching
> it.
> : > : > : >>
> : > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> : > : > ordering
> : > : > : >
> : > : > : > a
> : > : > : >
> : > : > : >>new hinge. Damn 20 minute job will have me out of commission for
> : > days!
> : > : > : >>
> : > : > : >>-Brian
> : > : > : >>
> : > : > : >>
> : > : > : >>
> : > : > : >
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>
04-05-2004, 06:39 PM
#90
Guest
Posts: n/a
Re: XJ Door Hinge - I'm in trouble!
$7.52/can is about what you should be paying. I hope this helps. If
they try to charge you more tell them that you pay less when you deal
with other locations.
Cherokee-LTD wrote:
> Mort,
> Thanks for pointing out the Midpark address... it's only about two miles
> from me. Is that a new location? It's about the same distance as Brafasco
> and closer than Facca for me. I'll wait for your price quote and head
> over... the price comparison may give me an indication of the pricing
> tendency. I found the Clark Rd. store to be roughly 10% higher across the
> board than Brafasco.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : There should be 2 locations in London. One is at 500 Clarke Road and
> : the other is at 105 Midpark Rd. Hope this helps. I can get you a price
> : of what you should be paying on Monday. I know some stores hike prices
> : for walk-ins but if you ask for a certain price they will usually give
> : it to you.
> : Mort
> :
> : Cherokee-LTD wrote:
> : > I'm in London south, they're in the upper east side of the city.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : Where do you live?
> : > :
> : > : Cherokee-LTD wrote:
> : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> they're
> : > across
> : > : > the city 2. they're not competitive price-wise. I'm more than
> willing to
> : > go
> : > : > out of my way and pay a bit extra for PB... everybody swears by it
> in
> : > here
> : > : > but nobody in town has ever heard of it (or at least they say so and
> : > then
> : > : > push their product).
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
> of
> : > : > : Canadian locations
> : > : > :
> : > : > : Kevin in San Diego wrote:
> : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> penetrating
> : > oil
> : > : > : > like pb blaster?
> : > : > : > KH
> : > : > : >
> : > : > : >
> : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : >
> : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
> lower
> : > pin
> : > : > : >>WILL NOT come out! I've removed the header panel...fender...door
> for
> : > : > : >
> : > : > : > access
> : > : > : >
> : > : > : >>and no luck. I ended up cutting the pin from the hinge but the
> top
> : > and
> : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : >>
> : > : > : >>Tried beating it out in the vice... nothing
> : > : > : >>Tried drilling it out in the drill press... not even scratching
> it.
> : > : > : >>
> : > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> : > : > ordering
> : > : > : >
> : > : > : > a
> : > : > : >
> : > : > : >>new hinge. Damn 20 minute job will have me out of commission for
> : > days!
> : > : > : >>
> : > : > : >>-Brian
> : > : > : >>
> : > : > : >>
> : > : > : >>
> : > : > : >
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>
they try to charge you more tell them that you pay less when you deal
with other locations.
Cherokee-LTD wrote:
> Mort,
> Thanks for pointing out the Midpark address... it's only about two miles
> from me. Is that a new location? It's about the same distance as Brafasco
> and closer than Facca for me. I'll wait for your price quote and head
> over... the price comparison may give me an indication of the pricing
> tendency. I found the Clark Rd. store to be roughly 10% higher across the
> board than Brafasco.
> -Brian
>
> "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> news:jFGbc.19584$n37.1482650@read2.cgocable.net...
> : There should be 2 locations in London. One is at 500 Clarke Road and
> : the other is at 105 Midpark Rd. Hope this helps. I can get you a price
> : of what you should be paying on Monday. I know some stores hike prices
> : for walk-ins but if you ask for a certain price they will usually give
> : it to you.
> : Mort
> :
> : Cherokee-LTD wrote:
> : > I'm in London south, they're in the upper east side of the city.
> : > -Brian
> : >
> : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > news:wcFbc.19571$n37.1479736@read2.cgocable.net...
> : > : Where do you live?
> : > :
> : > : Cherokee-LTD wrote:
> : > : > Thanks Mort - I never thought to try them for two reasons. 1.
> they're
> : > across
> : > : > the city 2. they're not competitive price-wise. I'm more than
> willing to
> : > go
> : > : > out of my way and pay a bit extra for PB... everybody swears by it
> in
> : > here
> : > : > but nobody in town has ever heard of it (or at least they say so and
> : > then
> : > : > push their product).
> : > : > -Brian
> : > : >
> : > : > "Mort" <jmorton@on.aibn.nospamcom> wrote in message
> : > : > news:VkDbc.19562$n37.1475652@read2.cgocable.net...
> : > : > : You can buy PB Blaster in Canada visit www.fastenal.com for a list
> of
> : > : > : Canadian locations
> : > : > :
> : > : > : Kevin in San Diego wrote:
> : > : > : > LOL Brian, good luck. Did you try soaking it in a vat of
> penetrating
> : > oil
> : > : > : > like pb blaster?
> : > : > : > KH
> : > : > : >
> : > : > : >
> : > : > : > "Cherokee-LTD" <spammenot@home.com> wrote in message
> : > : > : > news:Mlrbc.9335$jVF.5895@news04.bloor.is.net.cable .rogers.com...
> : > : > : >
> : > : > : >>I'm trying to replace the hinge pin on my '92 XJ... left front
> lower
> : > pin
> : > : > : >>WILL NOT come out! I've removed the header panel...fender...door
> for
> : > : > : >
> : > : > : > access
> : > : > : >
> : > : > : >>and no luck. I ended up cutting the pin from the hinge but the
> top
> : > and
> : > : > : >>bottom is still stuck in there... any ideas?
> : > : > : >>
> : > : > : >>Tried beating it out in the vice... nothing
> : > : > : >>Tried drilling it out in the drill press... not even scratching
> it.
> : > : > : >>
> : > : > : >>I'm going to try some heat tomorrow but I have a feeling I'll be
> : > : > ordering
> : > : > : >
> : > : > : > a
> : > : > : >
> : > : > : >>new hinge. Damn 20 minute job will have me out of commission for
> : > days!
> : > : > : >>
> : > : > : >>-Brian
> : > : > : >>
> : > : > : >>
> : > : > : >>
> : > : > : >
> : > : > : >
> : > : > : >
> : > : > :
> : > : >
> : > : >
> : > :
> : >
> : >
> :
>
>