XJ 4.0 loses power on left turns
Guest
Posts: n/a
Re: XJ 4.0 loses power on left turns
Mike Romain did pass the time by typing:
> I would be looking for a wire on the exhaust manifold or on the pipe
> that is 'almost' touching. Turn a corner and gravity does it's thing.
Heh..
Like this one for my O2 sensor that was burned.
http://members.***.net/wilsond/temp/damage.jpg
That happened down on the engine just forward of
where the O2 sensor harness clips to the oil pan.
There is a bolt and clip that holds it to the
engine block. Seems it can get a _tad_ too close
to the header or get pinched in the clip. The
excess heat also makes the wire brittle, I had to
clean and strip about 4" of wire and re-inusulate
it with rubber tape. (splicing is optional)
To reroute it I used the upper rear PS adjustment
bolt to hold the clip in and ran the wire way clear
of the header.
Sorry, no pics. :( I need to clean up some space on
the ol website.
--
DougW
> I would be looking for a wire on the exhaust manifold or on the pipe
> that is 'almost' touching. Turn a corner and gravity does it's thing.
Heh..
Like this one for my O2 sensor that was burned.
http://members.***.net/wilsond/temp/damage.jpg
That happened down on the engine just forward of
where the O2 sensor harness clips to the oil pan.
There is a bolt and clip that holds it to the
engine block. Seems it can get a _tad_ too close
to the header or get pinched in the clip. The
excess heat also makes the wire brittle, I had to
clean and strip about 4" of wire and re-inusulate
it with rubber tape. (splicing is optional)
To reroute it I used the upper rear PS adjustment
bolt to hold the clip in and ran the wire way clear
of the header.
Sorry, no pics. :( I need to clean up some space on
the ol website.
--
DougW
Guest
Posts: n/a
Re: XJ 4.0 loses power on left turns
Mike Romain did pass the time by typing:
> I would be looking for a wire on the exhaust manifold or on the pipe
> that is 'almost' touching. Turn a corner and gravity does it's thing.
Heh..
Like this one for my O2 sensor that was burned.
http://members.***.net/wilsond/temp/damage.jpg
That happened down on the engine just forward of
where the O2 sensor harness clips to the oil pan.
There is a bolt and clip that holds it to the
engine block. Seems it can get a _tad_ too close
to the header or get pinched in the clip. The
excess heat also makes the wire brittle, I had to
clean and strip about 4" of wire and re-inusulate
it with rubber tape. (splicing is optional)
To reroute it I used the upper rear PS adjustment
bolt to hold the clip in and ran the wire way clear
of the header.
Sorry, no pics. :( I need to clean up some space on
the ol website.
--
DougW
> I would be looking for a wire on the exhaust manifold or on the pipe
> that is 'almost' touching. Turn a corner and gravity does it's thing.
Heh..
Like this one for my O2 sensor that was burned.
http://members.***.net/wilsond/temp/damage.jpg
That happened down on the engine just forward of
where the O2 sensor harness clips to the oil pan.
There is a bolt and clip that holds it to the
engine block. Seems it can get a _tad_ too close
to the header or get pinched in the clip. The
excess heat also makes the wire brittle, I had to
clean and strip about 4" of wire and re-inusulate
it with rubber tape. (splicing is optional)
To reroute it I used the upper rear PS adjustment
bolt to hold the clip in and ran the wire way clear
of the header.
Sorry, no pics. :( I need to clean up some space on
the ol website.
--
DougW
Guest
Posts: n/a
Re: XJ 4.0 loses power on left turns
Mike Romain did pass the time by typing:
> I would be looking for a wire on the exhaust manifold or on the pipe
> that is 'almost' touching. Turn a corner and gravity does it's thing.
Heh..
Like this one for my O2 sensor that was burned.
http://members.***.net/wilsond/temp/damage.jpg
That happened down on the engine just forward of
where the O2 sensor harness clips to the oil pan.
There is a bolt and clip that holds it to the
engine block. Seems it can get a _tad_ too close
to the header or get pinched in the clip. The
excess heat also makes the wire brittle, I had to
clean and strip about 4" of wire and re-inusulate
it with rubber tape. (splicing is optional)
To reroute it I used the upper rear PS adjustment
bolt to hold the clip in and ran the wire way clear
of the header.
Sorry, no pics. :( I need to clean up some space on
the ol website.
--
DougW
> I would be looking for a wire on the exhaust manifold or on the pipe
> that is 'almost' touching. Turn a corner and gravity does it's thing.
Heh..
Like this one for my O2 sensor that was burned.
http://members.***.net/wilsond/temp/damage.jpg
That happened down on the engine just forward of
where the O2 sensor harness clips to the oil pan.
There is a bolt and clip that holds it to the
engine block. Seems it can get a _tad_ too close
to the header or get pinched in the clip. The
excess heat also makes the wire brittle, I had to
clean and strip about 4" of wire and re-inusulate
it with rubber tape. (splicing is optional)
To reroute it I used the upper rear PS adjustment
bolt to hold the clip in and ran the wire way clear
of the header.
Sorry, no pics. :( I need to clean up some space on
the ol website.
--
DougW
Guest
Posts: n/a
Re: XJ 4.0 loses power on left turns
DougW did pass the time by typing:
> Mike Romain did pass the time by typing:
>> I would be looking for a wire on the exhaust manifold or on the pipe
>> that is 'almost' touching. Turn a corner and gravity does it's thing.
>
> Heh..
>
> Like this one for my O2 sensor that was burned.
> http://members.***.net/wilsond/temp/damage.jpg
Missed one. This is the clip.
http://members.***.net/wilsond/temp/holddown.jpg
> Mike Romain did pass the time by typing:
>> I would be looking for a wire on the exhaust manifold or on the pipe
>> that is 'almost' touching. Turn a corner and gravity does it's thing.
>
> Heh..
>
> Like this one for my O2 sensor that was burned.
> http://members.***.net/wilsond/temp/damage.jpg
Missed one. This is the clip.
http://members.***.net/wilsond/temp/holddown.jpg
Guest
Posts: n/a
Re: XJ 4.0 loses power on left turns
DougW did pass the time by typing:
> Mike Romain did pass the time by typing:
>> I would be looking for a wire on the exhaust manifold or on the pipe
>> that is 'almost' touching. Turn a corner and gravity does it's thing.
>
> Heh..
>
> Like this one for my O2 sensor that was burned.
> http://members.***.net/wilsond/temp/damage.jpg
Missed one. This is the clip.
http://members.***.net/wilsond/temp/holddown.jpg
> Mike Romain did pass the time by typing:
>> I would be looking for a wire on the exhaust manifold or on the pipe
>> that is 'almost' touching. Turn a corner and gravity does it's thing.
>
> Heh..
>
> Like this one for my O2 sensor that was burned.
> http://members.***.net/wilsond/temp/damage.jpg
Missed one. This is the clip.
http://members.***.net/wilsond/temp/holddown.jpg
Guest
Posts: n/a
Re: XJ 4.0 loses power on left turns
DougW did pass the time by typing:
> Mike Romain did pass the time by typing:
>> I would be looking for a wire on the exhaust manifold or on the pipe
>> that is 'almost' touching. Turn a corner and gravity does it's thing.
>
> Heh..
>
> Like this one for my O2 sensor that was burned.
> http://members.***.net/wilsond/temp/damage.jpg
Missed one. This is the clip.
http://members.***.net/wilsond/temp/holddown.jpg
> Mike Romain did pass the time by typing:
>> I would be looking for a wire on the exhaust manifold or on the pipe
>> that is 'almost' touching. Turn a corner and gravity does it's thing.
>
> Heh..
>
> Like this one for my O2 sensor that was burned.
> http://members.***.net/wilsond/temp/damage.jpg
Missed one. This is the clip.
http://members.***.net/wilsond/temp/holddown.jpg
Guest
Posts: n/a
Re: XJ 4.0 loses power on left turns
DougW did pass the time by typing:
> Mike Romain did pass the time by typing:
>> I would be looking for a wire on the exhaust manifold or on the pipe
>> that is 'almost' touching. Turn a corner and gravity does it's thing.
>
> Heh..
>
> Like this one for my O2 sensor that was burned.
> http://members.***.net/wilsond/temp/damage.jpg
Missed one. This is the clip.
http://members.***.net/wilsond/temp/holddown.jpg
> Mike Romain did pass the time by typing:
>> I would be looking for a wire on the exhaust manifold or on the pipe
>> that is 'almost' touching. Turn a corner and gravity does it's thing.
>
> Heh..
>
> Like this one for my O2 sensor that was burned.
> http://members.***.net/wilsond/temp/damage.jpg
Missed one. This is the clip.
http://members.***.net/wilsond/temp/holddown.jpg
Guest
Posts: n/a
Re: XJ 4.0 loses power on left turns
"DougW" <post.replies@invalid.address> wrote in message
news:xeagc.18643$ec1.2483@okepread01...
: Cherokee-LTD did pass the time by typing:
: > "DougW" <post.replies@invalid.address> wrote in message
: >>
: >> Hard to tell for sure, there could be all sorts of things even down to
bad
: >> diffs (but you should hear that easily).
: >>
: >> I'm guessing here (as if you can't tell) :)
: >>
: >> mmm.. Guinness. :D
: >>
: > LOL!!! I will archive this message for the next time my XJ is running
: > rough... "Honey, look here, it might be the diffs. Why don't I swap in
those
: > 44's... just in case!"
:
: You never know when that rough running is being caused by having too small
a tire
: or the cabin noise from being too close to the road.
:
: Now you can justify larger wheels and a lift kit. :)
:
Ahh yes... I found that my Astro was too light in the rear for the snow...
the addition of three amps and 2-12" subs has really planted those rear
tires in slippery conditions.
-Brian
Guest
Posts: n/a
Re: XJ 4.0 loses power on left turns
"DougW" <post.replies@invalid.address> wrote in message
news:xeagc.18643$ec1.2483@okepread01...
: Cherokee-LTD did pass the time by typing:
: > "DougW" <post.replies@invalid.address> wrote in message
: >>
: >> Hard to tell for sure, there could be all sorts of things even down to
bad
: >> diffs (but you should hear that easily).
: >>
: >> I'm guessing here (as if you can't tell) :)
: >>
: >> mmm.. Guinness. :D
: >>
: > LOL!!! I will archive this message for the next time my XJ is running
: > rough... "Honey, look here, it might be the diffs. Why don't I swap in
those
: > 44's... just in case!"
:
: You never know when that rough running is being caused by having too small
a tire
: or the cabin noise from being too close to the road.
:
: Now you can justify larger wheels and a lift kit. :)
:
Ahh yes... I found that my Astro was too light in the rear for the snow...
the addition of three amps and 2-12" subs has really planted those rear
tires in slippery conditions.
-Brian
Guest
Posts: n/a
Re: XJ 4.0 loses power on left turns
"DougW" <post.replies@invalid.address> wrote in message
news:xeagc.18643$ec1.2483@okepread01...
: Cherokee-LTD did pass the time by typing:
: > "DougW" <post.replies@invalid.address> wrote in message
: >>
: >> Hard to tell for sure, there could be all sorts of things even down to
bad
: >> diffs (but you should hear that easily).
: >>
: >> I'm guessing here (as if you can't tell) :)
: >>
: >> mmm.. Guinness. :D
: >>
: > LOL!!! I will archive this message for the next time my XJ is running
: > rough... "Honey, look here, it might be the diffs. Why don't I swap in
those
: > 44's... just in case!"
:
: You never know when that rough running is being caused by having too small
a tire
: or the cabin noise from being too close to the road.
:
: Now you can justify larger wheels and a lift kit. :)
:
Ahh yes... I found that my Astro was too light in the rear for the snow...
the addition of three amps and 2-12" subs has really planted those rear
tires in slippery conditions.
-Brian
