What is this bolt for??? 83 CJ7 258
11-23-2003, 05:49 PM
#11
Guest
Posts: n/a
Re: What is this bolt for??? 83 CJ7 258
In the position of the new pipe threaded plug or the actual head
bolt, here a stud?
http://www.off-road.com/jeep/tech/en...adconv/131.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve cover
> just next to the firewall and next to the temp sender. It's not at the back
> of the motor but on the driver's side.
> Allen
bolt, here a stud?
http://www.off-road.com/jeep/tech/en...adconv/131.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve cover
> just next to the firewall and next to the temp sender. It's not at the back
> of the motor but on the driver's side.
> Allen
11-23-2003, 05:49 PM
#12
Guest
Posts: n/a
Re: What is this bolt for??? 83 CJ7 258
In the position of the new pipe threaded plug or the actual head
bolt, here a stud?
http://www.off-road.com/jeep/tech/en...adconv/131.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve cover
> just next to the firewall and next to the temp sender. It's not at the back
> of the motor but on the driver's side.
> Allen
bolt, here a stud?
http://www.off-road.com/jeep/tech/en...adconv/131.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve cover
> just next to the firewall and next to the temp sender. It's not at the back
> of the motor but on the driver's side.
> Allen
11-23-2003, 05:49 PM
#13
Guest
Posts: n/a
Re: What is this bolt for??? 83 CJ7 258
In the position of the new pipe threaded plug or the actual head
bolt, here a stud?
http://www.off-road.com/jeep/tech/en...adconv/131.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve cover
> just next to the firewall and next to the temp sender. It's not at the back
> of the motor but on the driver's side.
> Allen
bolt, here a stud?
http://www.off-road.com/jeep/tech/en...adconv/131.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve cover
> just next to the firewall and next to the temp sender. It's not at the back
> of the motor but on the driver's side.
> Allen
11-23-2003, 07:36 PM
#14
Guest
Posts: n/a
Re: What is this bolt for??? 83 CJ7 258
Bill, thanks for the picture. It's perfect. I guess I didn't realize that
half of the headbolts were under the valve cover and the other half are
outside of the valve cover. Anyway, it IS in fact a head bolt that was
leaking! What is your take on this? I'm suprised it was loose! I've replaced
a head gasket on a Rabbit GTI once,..never on a Jeep. But in the picture,
there are other holes spaced between the head bolts. What the heck are those
for? They look like valve cover bolt holes but there are washers on the head
bolts that hold my valve cover down on that side.
Thanks again!
Allen
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC13960.896F9FB7@***.net...
> In the position of the new pipe threaded plug or the actual head
> bolt, here a stud?
> http://www.off-road.com/jeep/tech/en...adconv/131.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ABanks5@columbus.rr.com wrote:
> >
> > Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve
cover
> > just next to the firewall and next to the temp sender. It's not at the
back
> > of the motor but on the driver's side.
> > Allen
half of the headbolts were under the valve cover and the other half are
outside of the valve cover. Anyway, it IS in fact a head bolt that was
leaking! What is your take on this? I'm suprised it was loose! I've replaced
a head gasket on a Rabbit GTI once,..never on a Jeep. But in the picture,
there are other holes spaced between the head bolts. What the heck are those
for? They look like valve cover bolt holes but there are washers on the head
bolts that hold my valve cover down on that side.
Thanks again!
Allen
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC13960.896F9FB7@***.net...
> In the position of the new pipe threaded plug or the actual head
> bolt, here a stud?
> http://www.off-road.com/jeep/tech/en...adconv/131.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ABanks5@columbus.rr.com wrote:
> >
> > Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve
cover
> > just next to the firewall and next to the temp sender. It's not at the
back
> > of the motor but on the driver's side.
> > Allen
11-23-2003, 07:36 PM
#15
Guest
Posts: n/a
Re: What is this bolt for??? 83 CJ7 258
Bill, thanks for the picture. It's perfect. I guess I didn't realize that
half of the headbolts were under the valve cover and the other half are
outside of the valve cover. Anyway, it IS in fact a head bolt that was
leaking! What is your take on this? I'm suprised it was loose! I've replaced
a head gasket on a Rabbit GTI once,..never on a Jeep. But in the picture,
there are other holes spaced between the head bolts. What the heck are those
for? They look like valve cover bolt holes but there are washers on the head
bolts that hold my valve cover down on that side.
Thanks again!
Allen
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC13960.896F9FB7@***.net...
> In the position of the new pipe threaded plug or the actual head
> bolt, here a stud?
> http://www.off-road.com/jeep/tech/en...adconv/131.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ABanks5@columbus.rr.com wrote:
> >
> > Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve
cover
> > just next to the firewall and next to the temp sender. It's not at the
back
> > of the motor but on the driver's side.
> > Allen
half of the headbolts were under the valve cover and the other half are
outside of the valve cover. Anyway, it IS in fact a head bolt that was
leaking! What is your take on this? I'm suprised it was loose! I've replaced
a head gasket on a Rabbit GTI once,..never on a Jeep. But in the picture,
there are other holes spaced between the head bolts. What the heck are those
for? They look like valve cover bolt holes but there are washers on the head
bolts that hold my valve cover down on that side.
Thanks again!
Allen
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC13960.896F9FB7@***.net...
> In the position of the new pipe threaded plug or the actual head
> bolt, here a stud?
> http://www.off-road.com/jeep/tech/en...adconv/131.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ABanks5@columbus.rr.com wrote:
> >
> > Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve
cover
> > just next to the firewall and next to the temp sender. It's not at the
back
> > of the motor but on the driver's side.
> > Allen
11-23-2003, 07:36 PM
#16
Guest
Posts: n/a
Re: What is this bolt for??? 83 CJ7 258
Bill, thanks for the picture. It's perfect. I guess I didn't realize that
half of the headbolts were under the valve cover and the other half are
outside of the valve cover. Anyway, it IS in fact a head bolt that was
leaking! What is your take on this? I'm suprised it was loose! I've replaced
a head gasket on a Rabbit GTI once,..never on a Jeep. But in the picture,
there are other holes spaced between the head bolts. What the heck are those
for? They look like valve cover bolt holes but there are washers on the head
bolts that hold my valve cover down on that side.
Thanks again!
Allen
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC13960.896F9FB7@***.net...
> In the position of the new pipe threaded plug or the actual head
> bolt, here a stud?
> http://www.off-road.com/jeep/tech/en...adconv/131.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ABanks5@columbus.rr.com wrote:
> >
> > Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve
cover
> > just next to the firewall and next to the temp sender. It's not at the
back
> > of the motor but on the driver's side.
> > Allen
half of the headbolts were under the valve cover and the other half are
outside of the valve cover. Anyway, it IS in fact a head bolt that was
leaking! What is your take on this? I'm suprised it was loose! I've replaced
a head gasket on a Rabbit GTI once,..never on a Jeep. But in the picture,
there are other holes spaced between the head bolts. What the heck are those
for? They look like valve cover bolt holes but there are washers on the head
bolts that hold my valve cover down on that side.
Thanks again!
Allen
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC13960.896F9FB7@***.net...
> In the position of the new pipe threaded plug or the actual head
> bolt, here a stud?
> http://www.off-road.com/jeep/tech/en...adconv/131.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ABanks5@columbus.rr.com wrote:
> >
> > Yup. I'll have a picture of it soon. It's about 1/2 inch off the valve
cover
> > just next to the firewall and next to the temp sender. It's not at the
back
> > of the motor but on the driver's side.
> > Allen
Thread
Thread Starter
Forum
Replies
Last Post
Ron Croonenberg
Jeep Mailing List
36
03-25-2005 01:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
