Weld or bolt roll bar to frame?
#21
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
You can email them to me at abanks1@columbus.rr.com
Thanks Mike!
I'm in the process of putting in a cage in my CJ and need pointers for the
front.
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFED6FE.8C02BF11@sympatico.ca...
> Yes.
>
> Are you a member of Sony's Imagestation?
>
> Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> you can get that NG.
>
> Mike
>
> Allen wrote:
> >
> > Do you have any pics of this Mike?
> > Allen
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3FFD7213.8A022C35@sympatico.ca...
> > > I put plates under my tub so I could bolt the roll bar through the tub
> > > to the plates. I made these plates large enough to grab the stock
frame
> > > 'rubber' mounts.
> > >
> > > This way my bar is tagged to the frame behind the seats. I need a new
> > > rear cross member and when I get that I am tagging the rear of the
roll
> > > bar down to the rubber tub mounts there.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > William Oliveri wrote:
> > > >
> > > > I've heard seveal people say they'd prefer to do this so in case of
roll
> > > > over the roll bar does not press through the body.
> > > >
> > > > opinions/comments
> > > >
> > > > Thanks,
> > > >
> > > > bill
Thanks Mike!
I'm in the process of putting in a cage in my CJ and need pointers for the
front.
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFED6FE.8C02BF11@sympatico.ca...
> Yes.
>
> Are you a member of Sony's Imagestation?
>
> Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> you can get that NG.
>
> Mike
>
> Allen wrote:
> >
> > Do you have any pics of this Mike?
> > Allen
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3FFD7213.8A022C35@sympatico.ca...
> > > I put plates under my tub so I could bolt the roll bar through the tub
> > > to the plates. I made these plates large enough to grab the stock
frame
> > > 'rubber' mounts.
> > >
> > > This way my bar is tagged to the frame behind the seats. I need a new
> > > rear cross member and when I get that I am tagging the rear of the
roll
> > > bar down to the rubber tub mounts there.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > William Oliveri wrote:
> > > >
> > > > I've heard seveal people say they'd prefer to do this so in case of
roll
> > > > over the roll bar does not press through the body.
> > > >
> > > > opinions/comments
> > > >
> > > > Thanks,
> > > >
> > > > bill
#22
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
You can email them to me at abanks1@columbus.rr.com
Thanks Mike!
I'm in the process of putting in a cage in my CJ and need pointers for the
front.
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFED6FE.8C02BF11@sympatico.ca...
> Yes.
>
> Are you a member of Sony's Imagestation?
>
> Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> you can get that NG.
>
> Mike
>
> Allen wrote:
> >
> > Do you have any pics of this Mike?
> > Allen
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3FFD7213.8A022C35@sympatico.ca...
> > > I put plates under my tub so I could bolt the roll bar through the tub
> > > to the plates. I made these plates large enough to grab the stock
frame
> > > 'rubber' mounts.
> > >
> > > This way my bar is tagged to the frame behind the seats. I need a new
> > > rear cross member and when I get that I am tagging the rear of the
roll
> > > bar down to the rubber tub mounts there.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > William Oliveri wrote:
> > > >
> > > > I've heard seveal people say they'd prefer to do this so in case of
roll
> > > > over the roll bar does not press through the body.
> > > >
> > > > opinions/comments
> > > >
> > > > Thanks,
> > > >
> > > > bill
Thanks Mike!
I'm in the process of putting in a cage in my CJ and need pointers for the
front.
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFED6FE.8C02BF11@sympatico.ca...
> Yes.
>
> Are you a member of Sony's Imagestation?
>
> Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> you can get that NG.
>
> Mike
>
> Allen wrote:
> >
> > Do you have any pics of this Mike?
> > Allen
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3FFD7213.8A022C35@sympatico.ca...
> > > I put plates under my tub so I could bolt the roll bar through the tub
> > > to the plates. I made these plates large enough to grab the stock
frame
> > > 'rubber' mounts.
> > >
> > > This way my bar is tagged to the frame behind the seats. I need a new
> > > rear cross member and when I get that I am tagging the rear of the
roll
> > > bar down to the rubber tub mounts there.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > William Oliveri wrote:
> > > >
> > > > I've heard seveal people say they'd prefer to do this so in case of
roll
> > > > over the roll bar does not press through the body.
> > > >
> > > > opinions/comments
> > > >
> > > > Thanks,
> > > >
> > > > bill
#23
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
In article <7jELb.105301$Dp5.76887@fe3.columbus.rr.com>,
"Allen" <abanks1@columbus.rr.com> wrote:
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
MIKE! Don't do it man!
Post 'em instead!
alt.binaries.pictures.autos.4x4
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
"Allen" <abanks1@columbus.rr.com> wrote:
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
MIKE! Don't do it man!
Post 'em instead!
alt.binaries.pictures.autos.4x4
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
#24
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
In article <7jELb.105301$Dp5.76887@fe3.columbus.rr.com>,
"Allen" <abanks1@columbus.rr.com> wrote:
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
MIKE! Don't do it man!
Post 'em instead!
alt.binaries.pictures.autos.4x4
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
"Allen" <abanks1@columbus.rr.com> wrote:
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
MIKE! Don't do it man!
Post 'em instead!
alt.binaries.pictures.autos.4x4
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
#25
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
In article <7jELb.105301$Dp5.76887@fe3.columbus.rr.com>,
"Allen" <abanks1@columbus.rr.com> wrote:
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
MIKE! Don't do it man!
Post 'em instead!
alt.binaries.pictures.autos.4x4
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
"Allen" <abanks1@columbus.rr.com> wrote:
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
MIKE! Don't do it man!
Post 'em instead!
alt.binaries.pictures.autos.4x4
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
#26
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Ok, I will send them.
I do have a 'glass body but the same thing holds. Just a metal plate
with some holes all the way through.
Mike
Allen wrote:
>
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFED6FE.8C02BF11@sympatico.ca...
> > Yes.
> >
> > Are you a member of Sony's Imagestation?
> >
> > Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> > you can get that NG.
> >
> > Mike
> >
> > Allen wrote:
> > >
> > > Do you have any pics of this Mike?
> > > Allen
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3FFD7213.8A022C35@sympatico.ca...
> > > > I put plates under my tub so I could bolt the roll bar through the tub
> > > > to the plates. I made these plates large enough to grab the stock
> frame
> > > > 'rubber' mounts.
> > > >
> > > > This way my bar is tagged to the frame behind the seats. I need a new
> > > > rear cross member and when I get that I am tagging the rear of the
> roll
> > > > bar down to the rubber tub mounts there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > William Oliveri wrote:
> > > > >
> > > > > I've heard seveal people say they'd prefer to do this so in case of
> roll
> > > > > over the roll bar does not press through the body.
> > > > >
> > > > > opinions/comments
> > > > >
> > > > > Thanks,
> > > > >
> > > > > bill
I do have a 'glass body but the same thing holds. Just a metal plate
with some holes all the way through.
Mike
Allen wrote:
>
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFED6FE.8C02BF11@sympatico.ca...
> > Yes.
> >
> > Are you a member of Sony's Imagestation?
> >
> > Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> > you can get that NG.
> >
> > Mike
> >
> > Allen wrote:
> > >
> > > Do you have any pics of this Mike?
> > > Allen
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3FFD7213.8A022C35@sympatico.ca...
> > > > I put plates under my tub so I could bolt the roll bar through the tub
> > > > to the plates. I made these plates large enough to grab the stock
> frame
> > > > 'rubber' mounts.
> > > >
> > > > This way my bar is tagged to the frame behind the seats. I need a new
> > > > rear cross member and when I get that I am tagging the rear of the
> roll
> > > > bar down to the rubber tub mounts there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > William Oliveri wrote:
> > > > >
> > > > > I've heard seveal people say they'd prefer to do this so in case of
> roll
> > > > > over the roll bar does not press through the body.
> > > > >
> > > > > opinions/comments
> > > > >
> > > > > Thanks,
> > > > >
> > > > > bill
#27
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Ok, I will send them.
I do have a 'glass body but the same thing holds. Just a metal plate
with some holes all the way through.
Mike
Allen wrote:
>
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFED6FE.8C02BF11@sympatico.ca...
> > Yes.
> >
> > Are you a member of Sony's Imagestation?
> >
> > Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> > you can get that NG.
> >
> > Mike
> >
> > Allen wrote:
> > >
> > > Do you have any pics of this Mike?
> > > Allen
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3FFD7213.8A022C35@sympatico.ca...
> > > > I put plates under my tub so I could bolt the roll bar through the tub
> > > > to the plates. I made these plates large enough to grab the stock
> frame
> > > > 'rubber' mounts.
> > > >
> > > > This way my bar is tagged to the frame behind the seats. I need a new
> > > > rear cross member and when I get that I am tagging the rear of the
> roll
> > > > bar down to the rubber tub mounts there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > William Oliveri wrote:
> > > > >
> > > > > I've heard seveal people say they'd prefer to do this so in case of
> roll
> > > > > over the roll bar does not press through the body.
> > > > >
> > > > > opinions/comments
> > > > >
> > > > > Thanks,
> > > > >
> > > > > bill
I do have a 'glass body but the same thing holds. Just a metal plate
with some holes all the way through.
Mike
Allen wrote:
>
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFED6FE.8C02BF11@sympatico.ca...
> > Yes.
> >
> > Are you a member of Sony's Imagestation?
> >
> > Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> > you can get that NG.
> >
> > Mike
> >
> > Allen wrote:
> > >
> > > Do you have any pics of this Mike?
> > > Allen
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3FFD7213.8A022C35@sympatico.ca...
> > > > I put plates under my tub so I could bolt the roll bar through the tub
> > > > to the plates. I made these plates large enough to grab the stock
> frame
> > > > 'rubber' mounts.
> > > >
> > > > This way my bar is tagged to the frame behind the seats. I need a new
> > > > rear cross member and when I get that I am tagging the rear of the
> roll
> > > > bar down to the rubber tub mounts there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > William Oliveri wrote:
> > > > >
> > > > > I've heard seveal people say they'd prefer to do this so in case of
> roll
> > > > > over the roll bar does not press through the body.
> > > > >
> > > > > opinions/comments
> > > > >
> > > > > Thanks,
> > > > >
> > > > > bill
#28
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Ok, I will send them.
I do have a 'glass body but the same thing holds. Just a metal plate
with some holes all the way through.
Mike
Allen wrote:
>
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFED6FE.8C02BF11@sympatico.ca...
> > Yes.
> >
> > Are you a member of Sony's Imagestation?
> >
> > Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> > you can get that NG.
> >
> > Mike
> >
> > Allen wrote:
> > >
> > > Do you have any pics of this Mike?
> > > Allen
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3FFD7213.8A022C35@sympatico.ca...
> > > > I put plates under my tub so I could bolt the roll bar through the tub
> > > > to the plates. I made these plates large enough to grab the stock
> frame
> > > > 'rubber' mounts.
> > > >
> > > > This way my bar is tagged to the frame behind the seats. I need a new
> > > > rear cross member and when I get that I am tagging the rear of the
> roll
> > > > bar down to the rubber tub mounts there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > William Oliveri wrote:
> > > > >
> > > > > I've heard seveal people say they'd prefer to do this so in case of
> roll
> > > > > over the roll bar does not press through the body.
> > > > >
> > > > > opinions/comments
> > > > >
> > > > > Thanks,
> > > > >
> > > > > bill
I do have a 'glass body but the same thing holds. Just a metal plate
with some holes all the way through.
Mike
Allen wrote:
>
> You can email them to me at abanks1@columbus.rr.com
> Thanks Mike!
> I'm in the process of putting in a cage in my CJ and need pointers for the
> front.
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFED6FE.8C02BF11@sympatico.ca...
> > Yes.
> >
> > Are you a member of Sony's Imagestation?
> >
> > Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> > you can get that NG.
> >
> > Mike
> >
> > Allen wrote:
> > >
> > > Do you have any pics of this Mike?
> > > Allen
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3FFD7213.8A022C35@sympatico.ca...
> > > > I put plates under my tub so I could bolt the roll bar through the tub
> > > > to the plates. I made these plates large enough to grab the stock
> frame
> > > > 'rubber' mounts.
> > > >
> > > > This way my bar is tagged to the frame behind the seats. I need a new
> > > > rear cross member and when I get that I am tagging the rear of the
> roll
> > > > bar down to the rubber tub mounts there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > William Oliveri wrote:
> > > > >
> > > > > I've heard seveal people say they'd prefer to do this so in case of
> roll
> > > > > over the roll bar does not press through the body.
> > > > >
> > > > > opinions/comments
> > > > >
> > > > > Thanks,
> > > > >
> > > > > bill
#29
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Jeepers wrote:
>
> In article <7jELb.105301$Dp5.76887@fe3.columbus.rr.com>,
> "Allen" <abanks1@columbus.rr.com> wrote:
>
> > You can email them to me at abanks1@columbus.rr.com
> > Thanks Mike!
> > I'm in the process of putting in a cage in my CJ and need pointers for the
> > front.
> > Allen
>
> MIKE! Don't do it man!
>
> Post 'em instead!
> alt.binaries.pictures.autos.4x4
>
Done did both....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
>
> In article <7jELb.105301$Dp5.76887@fe3.columbus.rr.com>,
> "Allen" <abanks1@columbus.rr.com> wrote:
>
> > You can email them to me at abanks1@columbus.rr.com
> > Thanks Mike!
> > I'm in the process of putting in a cage in my CJ and need pointers for the
> > front.
> > Allen
>
> MIKE! Don't do it man!
>
> Post 'em instead!
> alt.binaries.pictures.autos.4x4
>
Done did both....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
#30
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Jeepers wrote:
>
> In article <7jELb.105301$Dp5.76887@fe3.columbus.rr.com>,
> "Allen" <abanks1@columbus.rr.com> wrote:
>
> > You can email them to me at abanks1@columbus.rr.com
> > Thanks Mike!
> > I'm in the process of putting in a cage in my CJ and need pointers for the
> > front.
> > Allen
>
> MIKE! Don't do it man!
>
> Post 'em instead!
> alt.binaries.pictures.autos.4x4
>
Done did both....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
>
> In article <7jELb.105301$Dp5.76887@fe3.columbus.rr.com>,
> "Allen" <abanks1@columbus.rr.com> wrote:
>
> > You can email them to me at abanks1@columbus.rr.com
> > Thanks Mike!
> > I'm in the process of putting in a cage in my CJ and need pointers for the
> > front.
> > Allen
>
> MIKE! Don't do it man!
>
> Post 'em instead!
> alt.binaries.pictures.autos.4x4
>
Done did both....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's