Weld or bolt roll bar to frame?
#11
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:4T1Lb.35418$It6.16208@news01.roc.ny...
> Hi CRWLR,
>
> Did you make your gussets, or did they come with your roll bar.
Currently,
> mine are only mounted to the floor. I have yet to put mine greasy side
up.
> <knocking on wood>.
>
Keep knocking ... It's just a matter of time.
When I bought my CJ, it had the roll cage already installed, so I don't know
the answer to your question. The gussets appear to be similar to the ones
that the tub is bolted to a little further back on the frame. the front
gussets are larger because the roll cage bolts further out from the frame
than the tub bolts are. But, the idea of the gusset is the same.
#12
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:4T1Lb.35418$It6.16208@news01.roc.ny...
> Hi CRWLR,
>
> Did you make your gussets, or did they come with your roll bar.
Currently,
> mine are only mounted to the floor. I have yet to put mine greasy side
up.
> <knocking on wood>.
>
Keep knocking ... It's just a matter of time.
When I bought my CJ, it had the roll cage already installed, so I don't know
the answer to your question. The gussets appear to be similar to the ones
that the tub is bolted to a little further back on the frame. the front
gussets are larger because the roll cage bolts further out from the frame
than the tub bolts are. But, the idea of the gusset is the same.
#13
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
"JimG" <jimg@cj7_2muchspam.com> wrote in message
news:4T1Lb.35418$It6.16208@news01.roc.ny...
> Hi CRWLR,
>
> Did you make your gussets, or did they come with your roll bar.
Currently,
> mine are only mounted to the floor. I have yet to put mine greasy side
up.
> <knocking on wood>.
>
Keep knocking ... It's just a matter of time.
When I bought my CJ, it had the roll cage already installed, so I don't know
the answer to your question. The gussets appear to be similar to the ones
that the tub is bolted to a little further back on the frame. the front
gussets are larger because the roll cage bolts further out from the frame
than the tub bolts are. But, the idea of the gusset is the same.
#14
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Do you have any pics of this Mike?
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFD7213.8A022C35@sympatico.ca...
> I put plates under my tub so I could bolt the roll bar through the tub
> to the plates. I made these plates large enough to grab the stock frame
> 'rubber' mounts.
>
> This way my bar is tagged to the frame behind the seats. I need a new
> rear cross member and when I get that I am tagging the rear of the roll
> bar down to the rubber tub mounts there.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I've heard seveal people say they'd prefer to do this so in case of roll
> > over the roll bar does not press through the body.
> >
> > opinions/comments
> >
> > Thanks,
> >
> > bill
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFD7213.8A022C35@sympatico.ca...
> I put plates under my tub so I could bolt the roll bar through the tub
> to the plates. I made these plates large enough to grab the stock frame
> 'rubber' mounts.
>
> This way my bar is tagged to the frame behind the seats. I need a new
> rear cross member and when I get that I am tagging the rear of the roll
> bar down to the rubber tub mounts there.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I've heard seveal people say they'd prefer to do this so in case of roll
> > over the roll bar does not press through the body.
> >
> > opinions/comments
> >
> > Thanks,
> >
> > bill
#15
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Do you have any pics of this Mike?
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFD7213.8A022C35@sympatico.ca...
> I put plates under my tub so I could bolt the roll bar through the tub
> to the plates. I made these plates large enough to grab the stock frame
> 'rubber' mounts.
>
> This way my bar is tagged to the frame behind the seats. I need a new
> rear cross member and when I get that I am tagging the rear of the roll
> bar down to the rubber tub mounts there.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I've heard seveal people say they'd prefer to do this so in case of roll
> > over the roll bar does not press through the body.
> >
> > opinions/comments
> >
> > Thanks,
> >
> > bill
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFD7213.8A022C35@sympatico.ca...
> I put plates under my tub so I could bolt the roll bar through the tub
> to the plates. I made these plates large enough to grab the stock frame
> 'rubber' mounts.
>
> This way my bar is tagged to the frame behind the seats. I need a new
> rear cross member and when I get that I am tagging the rear of the roll
> bar down to the rubber tub mounts there.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I've heard seveal people say they'd prefer to do this so in case of roll
> > over the roll bar does not press through the body.
> >
> > opinions/comments
> >
> > Thanks,
> >
> > bill
#16
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Do you have any pics of this Mike?
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFD7213.8A022C35@sympatico.ca...
> I put plates under my tub so I could bolt the roll bar through the tub
> to the plates. I made these plates large enough to grab the stock frame
> 'rubber' mounts.
>
> This way my bar is tagged to the frame behind the seats. I need a new
> rear cross member and when I get that I am tagging the rear of the roll
> bar down to the rubber tub mounts there.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I've heard seveal people say they'd prefer to do this so in case of roll
> > over the roll bar does not press through the body.
> >
> > opinions/comments
> >
> > Thanks,
> >
> > bill
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFD7213.8A022C35@sympatico.ca...
> I put plates under my tub so I could bolt the roll bar through the tub
> to the plates. I made these plates large enough to grab the stock frame
> 'rubber' mounts.
>
> This way my bar is tagged to the frame behind the seats. I need a new
> rear cross member and when I get that I am tagging the rear of the roll
> bar down to the rubber tub mounts there.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I've heard seveal people say they'd prefer to do this so in case of roll
> > over the roll bar does not press through the body.
> >
> > opinions/comments
> >
> > Thanks,
> >
> > bill
#17
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Yes.
Are you a member of Sony's Imagestation?
Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
you can get that NG.
Mike
Allen wrote:
>
> Do you have any pics of this Mike?
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFD7213.8A022C35@sympatico.ca...
> > I put plates under my tub so I could bolt the roll bar through the tub
> > to the plates. I made these plates large enough to grab the stock frame
> > 'rubber' mounts.
> >
> > This way my bar is tagged to the frame behind the seats. I need a new
> > rear cross member and when I get that I am tagging the rear of the roll
> > bar down to the rubber tub mounts there.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I've heard seveal people say they'd prefer to do this so in case of roll
> > > over the roll bar does not press through the body.
> > >
> > > opinions/comments
> > >
> > > Thanks,
> > >
> > > bill
Are you a member of Sony's Imagestation?
Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
you can get that NG.
Mike
Allen wrote:
>
> Do you have any pics of this Mike?
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFD7213.8A022C35@sympatico.ca...
> > I put plates under my tub so I could bolt the roll bar through the tub
> > to the plates. I made these plates large enough to grab the stock frame
> > 'rubber' mounts.
> >
> > This way my bar is tagged to the frame behind the seats. I need a new
> > rear cross member and when I get that I am tagging the rear of the roll
> > bar down to the rubber tub mounts there.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I've heard seveal people say they'd prefer to do this so in case of roll
> > > over the roll bar does not press through the body.
> > >
> > > opinions/comments
> > >
> > > Thanks,
> > >
> > > bill
#18
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Yes.
Are you a member of Sony's Imagestation?
Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
you can get that NG.
Mike
Allen wrote:
>
> Do you have any pics of this Mike?
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFD7213.8A022C35@sympatico.ca...
> > I put plates under my tub so I could bolt the roll bar through the tub
> > to the plates. I made these plates large enough to grab the stock frame
> > 'rubber' mounts.
> >
> > This way my bar is tagged to the frame behind the seats. I need a new
> > rear cross member and when I get that I am tagging the rear of the roll
> > bar down to the rubber tub mounts there.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I've heard seveal people say they'd prefer to do this so in case of roll
> > > over the roll bar does not press through the body.
> > >
> > > opinions/comments
> > >
> > > Thanks,
> > >
> > > bill
Are you a member of Sony's Imagestation?
Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
you can get that NG.
Mike
Allen wrote:
>
> Do you have any pics of this Mike?
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFD7213.8A022C35@sympatico.ca...
> > I put plates under my tub so I could bolt the roll bar through the tub
> > to the plates. I made these plates large enough to grab the stock frame
> > 'rubber' mounts.
> >
> > This way my bar is tagged to the frame behind the seats. I need a new
> > rear cross member and when I get that I am tagging the rear of the roll
> > bar down to the rubber tub mounts there.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I've heard seveal people say they'd prefer to do this so in case of roll
> > > over the roll bar does not press through the body.
> > >
> > > opinions/comments
> > >
> > > Thanks,
> > >
> > > bill
#19
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
Yes.
Are you a member of Sony's Imagestation?
Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
you can get that NG.
Mike
Allen wrote:
>
> Do you have any pics of this Mike?
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFD7213.8A022C35@sympatico.ca...
> > I put plates under my tub so I could bolt the roll bar through the tub
> > to the plates. I made these plates large enough to grab the stock frame
> > 'rubber' mounts.
> >
> > This way my bar is tagged to the frame behind the seats. I need a new
> > rear cross member and when I get that I am tagging the rear of the roll
> > bar down to the rubber tub mounts there.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I've heard seveal people say they'd prefer to do this so in case of roll
> > > over the roll bar does not press through the body.
> > >
> > > opinions/comments
> > >
> > > Thanks,
> > >
> > > bill
Are you a member of Sony's Imagestation?
Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
you can get that NG.
Mike
Allen wrote:
>
> Do you have any pics of this Mike?
> Allen
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3FFD7213.8A022C35@sympatico.ca...
> > I put plates under my tub so I could bolt the roll bar through the tub
> > to the plates. I made these plates large enough to grab the stock frame
> > 'rubber' mounts.
> >
> > This way my bar is tagged to the frame behind the seats. I need a new
> > rear cross member and when I get that I am tagging the rear of the roll
> > bar down to the rubber tub mounts there.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I've heard seveal people say they'd prefer to do this so in case of roll
> > > over the roll bar does not press through the body.
> > >
> > > opinions/comments
> > >
> > > Thanks,
> > >
> > > bill
#20
Guest
Posts: n/a
Re: Weld or bolt roll bar to frame?
You can email them to me at abanks1@columbus.rr.com
Thanks Mike!
I'm in the process of putting in a cage in my CJ and need pointers for the
front.
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFED6FE.8C02BF11@sympatico.ca...
> Yes.
>
> Are you a member of Sony's Imagestation?
>
> Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> you can get that NG.
>
> Mike
>
> Allen wrote:
> >
> > Do you have any pics of this Mike?
> > Allen
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3FFD7213.8A022C35@sympatico.ca...
> > > I put plates under my tub so I could bolt the roll bar through the tub
> > > to the plates. I made these plates large enough to grab the stock
frame
> > > 'rubber' mounts.
> > >
> > > This way my bar is tagged to the frame behind the seats. I need a new
> > > rear cross member and when I get that I am tagging the rear of the
roll
> > > bar down to the rubber tub mounts there.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > William Oliveri wrote:
> > > >
> > > > I've heard seveal people say they'd prefer to do this so in case of
roll
> > > > over the roll bar does not press through the body.
> > > >
> > > > opinions/comments
> > > >
> > > > Thanks,
> > > >
> > > > bill
Thanks Mike!
I'm in the process of putting in a cage in my CJ and need pointers for the
front.
Allen
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FFED6FE.8C02BF11@sympatico.ca...
> Yes.
>
> Are you a member of Sony's Imagestation?
>
> Or I could email them or post them on alt.binaries.pictures.autos.4x4 if
> you can get that NG.
>
> Mike
>
> Allen wrote:
> >
> > Do you have any pics of this Mike?
> > Allen
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3FFD7213.8A022C35@sympatico.ca...
> > > I put plates under my tub so I could bolt the roll bar through the tub
> > > to the plates. I made these plates large enough to grab the stock
frame
> > > 'rubber' mounts.
> > >
> > > This way my bar is tagged to the frame behind the seats. I need a new
> > > rear cross member and when I get that I am tagging the rear of the
roll
> > > bar down to the rubber tub mounts there.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > William Oliveri wrote:
> > > >
> > > > I've heard seveal people say they'd prefer to do this so in case of
roll
> > > > over the roll bar does not press through the body.
> > > >
> > > > opinions/comments
> > > >
> > > > Thanks,
> > > >
> > > > bill