Warn Manual Hub Conversion
12-17-2004, 08:39 PM
#21
Guest
Posts: n/a
Re: Warn Manual Hub Conversion
I was most confused when I lookup the part number. The 192 studs are the
ones listed with the kit and those are the ones Warn is shipping. I just
wish I could find out which vehicle they are used on typically, so I could
order them from anywhere. Oh well....
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10s4hout4ifqpb2@corp.supernews.com...
> IU looked up those wheel studs and came up with an entirely different
> number. I forget exactly, but I think I found a Bendiz # <same first
> 3>199. In at least one place, I found that the 024 number was the lug
> nuts. Confused? I was.
>
>
ones listed with the kit and those are the ones Warn is shipping. I just
wish I could find out which vehicle they are used on typically, so I could
order them from anywhere. Oh well....
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10s4hout4ifqpb2@corp.supernews.com...
> IU looked up those wheel studs and came up with an entirely different
> number. I forget exactly, but I think I found a Bendiz # <same first
> 3>199. In at least one place, I found that the 024 number was the lug
> nuts. Confused? I was.
>
>
12-17-2004, 08:39 PM
#22
Guest
Posts: n/a
Re: Warn Manual Hub Conversion
I was most confused when I lookup the part number. The 192 studs are the
ones listed with the kit and those are the ones Warn is shipping. I just
wish I could find out which vehicle they are used on typically, so I could
order them from anywhere. Oh well....
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10s4hout4ifqpb2@corp.supernews.com...
> IU looked up those wheel studs and came up with an entirely different
> number. I forget exactly, but I think I found a Bendiz # <same first
> 3>199. In at least one place, I found that the 024 number was the lug
> nuts. Confused? I was.
>
>
ones listed with the kit and those are the ones Warn is shipping. I just
wish I could find out which vehicle they are used on typically, so I could
order them from anywhere. Oh well....
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10s4hout4ifqpb2@corp.supernews.com...
> IU looked up those wheel studs and came up with an entirely different
> number. I forget exactly, but I think I found a Bendiz # <same first
> 3>199. In at least one place, I found that the 024 number was the lug
> nuts. Confused? I was.
>
>
12-17-2004, 08:57 PM
#23
Guest
Posts: n/a
Re: Warn Manual Hub Conversion
Matching your Real Jeep five on five and a half, they should be
half inch national fine thread, three inches long, to pass drag racing
tech standards: http://www.----------.com/9axles.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Doug Fritz wrote:
>
> I was most confused when I lookup the part number. The 192 studs are the
> ones listed with the kit and those are the ones Warn is shipping. I just
> wish I could find out which vehicle they are used on typically, so I could
> order them from anywhere. Oh well....
half inch national fine thread, three inches long, to pass drag racing
tech standards: http://www.----------.com/9axles.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Doug Fritz wrote:
>
> I was most confused when I lookup the part number. The 192 studs are the
> ones listed with the kit and those are the ones Warn is shipping. I just
> wish I could find out which vehicle they are used on typically, so I could
> order them from anywhere. Oh well....
12-17-2004, 08:57 PM
#24
Guest
Posts: n/a
Re: Warn Manual Hub Conversion
Matching your Real Jeep five on five and a half, they should be
half inch national fine thread, three inches long, to pass drag racing
tech standards: http://www.----------.com/9axles.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Doug Fritz wrote:
>
> I was most confused when I lookup the part number. The 192 studs are the
> ones listed with the kit and those are the ones Warn is shipping. I just
> wish I could find out which vehicle they are used on typically, so I could
> order them from anywhere. Oh well....
half inch national fine thread, three inches long, to pass drag racing
tech standards: http://www.----------.com/9axles.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Doug Fritz wrote:
>
> I was most confused when I lookup the part number. The 192 studs are the
> ones listed with the kit and those are the ones Warn is shipping. I just
> wish I could find out which vehicle they are used on typically, so I could
> order them from anywhere. Oh well....
12-17-2004, 08:57 PM
#25
Guest
Posts: n/a
Re: Warn Manual Hub Conversion
Matching your Real Jeep five on five and a half, they should be
half inch national fine thread, three inches long, to pass drag racing
tech standards: http://www.----------.com/9axles.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Doug Fritz wrote:
>
> I was most confused when I lookup the part number. The 192 studs are the
> ones listed with the kit and those are the ones Warn is shipping. I just
> wish I could find out which vehicle they are used on typically, so I could
> order them from anywhere. Oh well....
half inch national fine thread, three inches long, to pass drag racing
tech standards: http://www.----------.com/9axles.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Doug Fritz wrote:
>
> I was most confused when I lookup the part number. The 192 studs are the
> ones listed with the kit and those are the ones Warn is shipping. I just
> wish I could find out which vehicle they are used on typically, so I could
> order them from anywhere. Oh well....
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)