Warn Manual Hub Conversion
 

I am in the process of installing the Warn Manual Hub Conversion on my 89 YJ
Front Axle. I have the warn high strength axle shafts too. Anyway, the
wheel studs that came in the kit are not the ones listed on the parts list.
The parts list says Bendix Part 142092. The boxes I got say Bendix Part
142024. What I do not know is what Year, Make and model vehicle the 142092
studs fit. The kit says to purchase Front rotors for a 80-86 CJ7. Lookups
on the vehicle do not cross to the 142092 Bendix number. The parts stores I
have gone to (NAPA and SALVO) cannot use the Bendix number to look up the
studs. Does anyone know what year, make and model these studs come from?
This is for the 5x5.5 bolt pattern. Any help is greatly appreciated.

P.S. I have contacted 4WD Hardware, where I ordered the kit from, but they
are checking with Warn and who knows how long that will take or if it will
even produce any positive results.

Thanks,

Doug.

Re: Warn Manual Hub Conversion
 

Why don't you try calling Warn directly?

"Doug Fritz" <jp4by4cya@comcast.net> wrote in message
news:DL2dncwgsNQ9UF3cRVn-3Q@comcast.com...
> I am in the process of installing the Warn Manual Hub Conversion on my 89
YJ
> Front Axle. I have the warn high strength axle shafts too. Anyway, the
> wheel studs that came in the kit are not the ones listed on the parts
list.
> The parts list says Bendix Part 142092. The boxes I got say Bendix Part
> 142024. What I do not know is what Year, Make and model vehicle the
142092
> studs fit. The kit says to purchase Front rotors for a 80-86 CJ7.
Lookups
> on the vehicle do not cross to the 142092 Bendix number. The parts stores
I
> have gone to (NAPA and SALVO) cannot use the Bendix number to look up the
> studs. Does anyone know what year, make and model these studs come from?
> This is for the 5x5.5 bolt pattern. Any help is greatly appreciated.
>
> P.S. I have contacted 4WD Hardware, where I ordered the kit from, but
they
> are checking with Warn and who knows how long that will take or if it will
> even produce any positive results.
>
> Thanks,
>
> Doug.
>
>

Re: Warn Manual Hub Conversion
 

Why don't you try calling Warn directly?

"Doug Fritz" <jp4by4cya@comcast.net> wrote in message
news:DL2dncwgsNQ9UF3cRVn-3Q@comcast.com...
> I am in the process of installing the Warn Manual Hub Conversion on my 89
YJ
> Front Axle. I have the warn high strength axle shafts too. Anyway, the
> wheel studs that came in the kit are not the ones listed on the parts
list.
> The parts list says Bendix Part 142092. The boxes I got say Bendix Part
> 142024. What I do not know is what Year, Make and model vehicle the
142092
> studs fit. The kit says to purchase Front rotors for a 80-86 CJ7.
Lookups
> on the vehicle do not cross to the 142092 Bendix number. The parts stores
I
> have gone to (NAPA and SALVO) cannot use the Bendix number to look up the
> studs. Does anyone know what year, make and model these studs come from?
> This is for the 5x5.5 bolt pattern. Any help is greatly appreciated.
>
> P.S. I have contacted 4WD Hardware, where I ordered the kit from, but
they
> are checking with Warn and who knows how long that will take or if it will
> even produce any positive results.
>
> Thanks,
>
> Doug.
>
>

Re: Warn Manual Hub Conversion
 

Why don't you try calling Warn directly?

"Doug Fritz" <jp4by4cya@comcast.net> wrote in message
news:DL2dncwgsNQ9UF3cRVn-3Q@comcast.com...
> I am in the process of installing the Warn Manual Hub Conversion on my 89
YJ
> Front Axle. I have the warn high strength axle shafts too. Anyway, the
> wheel studs that came in the kit are not the ones listed on the parts
list.
> The parts list says Bendix Part 142092. The boxes I got say Bendix Part
> 142024. What I do not know is what Year, Make and model vehicle the
142092
> studs fit. The kit says to purchase Front rotors for a 80-86 CJ7.
Lookups
> on the vehicle do not cross to the 142092 Bendix number. The parts stores
I
> have gone to (NAPA and SALVO) cannot use the Bendix number to look up the
> studs. Does anyone know what year, make and model these studs come from?
> This is for the 5x5.5 bolt pattern. Any help is greatly appreciated.
>
> P.S. I have contacted 4WD Hardware, where I ordered the kit from, but
they
> are checking with Warn and who knows how long that will take or if it will
> even produce any positive results.
>
> Thanks,
>
> Doug.
>
>

Re: Warn Manual Hub Conversion
 

I do not know about your studs. Sorry.

But I am wondering if youare going to run into unintended problems, 5 on 5.5
in the front and 5 on 4.5 in the back.

While you are ordering those new 5 on 5.5 hubs for the rear, take a stud
with you and match it up to a lug nut.




"Doug Fritz" <jp4by4cya@comcast.net> wrote in message
news:DL2dncwgsNQ9UF3cRVn-3Q@comcast.com...
>I am in the process of installing the Warn Manual Hub Conversion on my 89
>YJ Front Axle. I have the warn high strength axle shafts too. Anyway, the
>wheel studs that came in the kit are not the ones listed on the parts list.
>The parts list says Bendix Part 142092. The boxes I got say Bendix Part
>142024. What I do not know is what Year, Make and model vehicle the 142092
>studs fit. The kit says to purchase Front rotors for a 80-86 CJ7. Lookups
>on the vehicle do not cross to the 142092 Bendix number. The parts stores
>I have gone to (NAPA and SALVO) cannot use the Bendix number to look up the
>studs. Does anyone know what year, make and model these studs come from?
>This is for the 5x5.5 bolt pattern. Any help is greatly appreciated.
>
> P.S. I have contacted 4WD Hardware, where I ordered the kit from, but
> they are checking with Warn and who knows how long that will take or if it
> will even produce any positive results.
>
> Thanks,
>
> Doug.
>
>

Re: Warn Manual Hub Conversion
 

I do not know about your studs. Sorry.

But I am wondering if youare going to run into unintended problems, 5 on 5.5
in the front and 5 on 4.5 in the back.

While you are ordering those new 5 on 5.5 hubs for the rear, take a stud
with you and match it up to a lug nut.




"Doug Fritz" <jp4by4cya@comcast.net> wrote in message
news:DL2dncwgsNQ9UF3cRVn-3Q@comcast.com...
>I am in the process of installing the Warn Manual Hub Conversion on my 89
>YJ Front Axle. I have the warn high strength axle shafts too. Anyway, the
>wheel studs that came in the kit are not the ones listed on the parts list.
>The parts list says Bendix Part 142092. The boxes I got say Bendix Part
>142024. What I do not know is what Year, Make and model vehicle the 142092
>studs fit. The kit says to purchase Front rotors for a 80-86 CJ7. Lookups
>on the vehicle do not cross to the 142092 Bendix number. The parts stores
>I have gone to (NAPA and SALVO) cannot use the Bendix number to look up the
>studs. Does anyone know what year, make and model these studs come from?
>This is for the 5x5.5 bolt pattern. Any help is greatly appreciated.
>
> P.S. I have contacted 4WD Hardware, where I ordered the kit from, but
> they are checking with Warn and who knows how long that will take or if it
> will even produce any positive results.
>
> Thanks,
>
> Doug.
>
>

Re: Warn Manual Hub Conversion
 

I do not know about your studs. Sorry.

But I am wondering if youare going to run into unintended problems, 5 on 5.5
in the front and 5 on 4.5 in the back.

While you are ordering those new 5 on 5.5 hubs for the rear, take a stud
with you and match it up to a lug nut.




"Doug Fritz" <jp4by4cya@comcast.net> wrote in message
news:DL2dncwgsNQ9UF3cRVn-3Q@comcast.com...
>I am in the process of installing the Warn Manual Hub Conversion on my 89
>YJ Front Axle. I have the warn high strength axle shafts too. Anyway, the
>wheel studs that came in the kit are not the ones listed on the parts list.
>The parts list says Bendix Part 142092. The boxes I got say Bendix Part
>142024. What I do not know is what Year, Make and model vehicle the 142092
>studs fit. The kit says to purchase Front rotors for a 80-86 CJ7. Lookups
>on the vehicle do not cross to the 142092 Bendix number. The parts stores
>I have gone to (NAPA and SALVO) cannot use the Bendix number to look up the
>studs. Does anyone know what year, make and model these studs come from?
>This is for the 5x5.5 bolt pattern. Any help is greatly appreciated.
>
> P.S. I have contacted 4WD Hardware, where I ordered the kit from, but
> they are checking with Warn and who knows how long that will take or if it
> will even produce any positive results.
>
> Thanks,
>
> Doug.
>
>

Re: Warn Manual Hub Conversion
 

No worries... I have already converted my rear axle (D44) to a full floater
with Warn premium locking hubs and 5 x 5.5 bolt pattern.

Matt suggested I call Warn directly, and that is more original course of
action for tomorrow. Thanks for all of your input.


"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10s1vcs6jg2fned@corp.supernews.com...
>I do not know about your studs. Sorry.
>
> But I am wondering if youare going to run into unintended problems, 5 on
> 5.5 in the front and 5 on 4.5 in the back.
>
> While you are ordering those new 5 on 5.5 hubs for the rear, take a stud
> with you and match it up to a lug nut.
>
>
>
>

Re: Warn Manual Hub Conversion
 

No worries... I have already converted my rear axle (D44) to a full floater
with Warn premium locking hubs and 5 x 5.5 bolt pattern.

Matt suggested I call Warn directly, and that is more original course of
action for tomorrow. Thanks for all of your input.


"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10s1vcs6jg2fned@corp.supernews.com...
>I do not know about your studs. Sorry.
>
> But I am wondering if youare going to run into unintended problems, 5 on
> 5.5 in the front and 5 on 4.5 in the back.
>
> While you are ordering those new 5 on 5.5 hubs for the rear, take a stud
> with you and match it up to a lug nut.
>
>
>
>

Re: Warn Manual Hub Conversion
 

No worries... I have already converted my rear axle (D44) to a full floater
with Warn premium locking hubs and 5 x 5.5 bolt pattern.

Matt suggested I call Warn directly, and that is more original course of
action for tomorrow. Thanks for all of your input.


"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10s1vcs6jg2fned@corp.supernews.com...
>I do not know about your studs. Sorry.
>
> But I am wondering if youare going to run into unintended problems, 5 on
> 5.5 in the front and 5 on 4.5 in the back.
>
> While you are ordering those new 5 on 5.5 hubs for the rear, take a stud
> with you and match it up to a lug nut.
>
>
>
>