U joint replacement
10-14-2003, 10:06 AM
#11
Guest
Posts: n/a
Re: U joint replacement
There is a special tool, it looks like a C-clamp.
Meanwhile I just use a 3/4" socket and hammer. Steel hammer eh, not a
hope of a rubber mallet breaking them loose.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ABanks5@columbus.rr.com wrote:
>
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do this
> or can I just an oversized socket and a rubber mallet? Anything I should be
> aware of?
> Thanks
> Allen
Meanwhile I just use a 3/4" socket and hammer. Steel hammer eh, not a
hope of a rubber mallet breaking them loose.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ABanks5@columbus.rr.com wrote:
>
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do this
> or can I just an oversized socket and a rubber mallet? Anything I should be
> aware of?
> Thanks
> Allen
10-14-2003, 10:06 AM
#12
Guest
Posts: n/a
Re: U joint replacement
There is a special tool, it looks like a C-clamp.
Meanwhile I just use a 3/4" socket and hammer. Steel hammer eh, not a
hope of a rubber mallet breaking them loose.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ABanks5@columbus.rr.com wrote:
>
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do this
> or can I just an oversized socket and a rubber mallet? Anything I should be
> aware of?
> Thanks
> Allen
Meanwhile I just use a 3/4" socket and hammer. Steel hammer eh, not a
hope of a rubber mallet breaking them loose.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ABanks5@columbus.rr.com wrote:
>
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do this
> or can I just an oversized socket and a rubber mallet? Anything I should be
> aware of?
> Thanks
> Allen
10-14-2003, 10:06 AM
#13
Guest
Posts: n/a
Re: U joint replacement
There is a special tool, it looks like a C-clamp.
Meanwhile I just use a 3/4" socket and hammer. Steel hammer eh, not a
hope of a rubber mallet breaking them loose.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ABanks5@columbus.rr.com wrote:
>
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do this
> or can I just an oversized socket and a rubber mallet? Anything I should be
> aware of?
> Thanks
> Allen
Meanwhile I just use a 3/4" socket and hammer. Steel hammer eh, not a
hope of a rubber mallet breaking them loose.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ABanks5@columbus.rr.com wrote:
>
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do this
> or can I just an oversized socket and a rubber mallet? Anything I should be
> aware of?
> Thanks
> Allen
10-14-2003, 09:33 PM
#14
Guest
Posts: n/a
Re: U joint replacement
Rubber mallet? I needed a BFH to get mine out. Mallets are for sissies.
<ABanks5@columbus.rr.com> wrote in message
news:RJIib.70349$uJ2.27376@fe3.columbus.rr.com...
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do
this
> or can I just an oversized socket and a rubber mallet? Anything I should
be
> aware of?
> Thanks
> Allen
>
>
<ABanks5@columbus.rr.com> wrote in message
news:RJIib.70349$uJ2.27376@fe3.columbus.rr.com...
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do
this
> or can I just an oversized socket and a rubber mallet? Anything I should
be
> aware of?
> Thanks
> Allen
>
>
10-14-2003, 09:33 PM
#15
Guest
Posts: n/a
Re: U joint replacement
Rubber mallet? I needed a BFH to get mine out. Mallets are for sissies.
<ABanks5@columbus.rr.com> wrote in message
news:RJIib.70349$uJ2.27376@fe3.columbus.rr.com...
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do
this
> or can I just an oversized socket and a rubber mallet? Anything I should
be
> aware of?
> Thanks
> Allen
>
>
<ABanks5@columbus.rr.com> wrote in message
news:RJIib.70349$uJ2.27376@fe3.columbus.rr.com...
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do
this
> or can I just an oversized socket and a rubber mallet? Anything I should
be
> aware of?
> Thanks
> Allen
>
>
10-14-2003, 09:33 PM
#16
Guest
Posts: n/a
Re: U joint replacement
Rubber mallet? I needed a BFH to get mine out. Mallets are for sissies.
<ABanks5@columbus.rr.com> wrote in message
news:RJIib.70349$uJ2.27376@fe3.columbus.rr.com...
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do
this
> or can I just an oversized socket and a rubber mallet? Anything I should
be
> aware of?
> Thanks
> Allen
>
>
<ABanks5@columbus.rr.com> wrote in message
news:RJIib.70349$uJ2.27376@fe3.columbus.rr.com...
> I'm looking at doing the job on my 83 CJ. Is there a special tool to do
this
> or can I just an oversized socket and a rubber mallet? Anything I should
be
> aware of?
> Thanks
> Allen
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)