mic canic did pass the time by typing:
> check the a pillar for cracks and the floor shifter just might be a recall
> issue call your local dealer

For the starting problem:
No recall that I see, just the park/neutral safety switch or link out of whack.
But on that subject there was at least one recall in that area. (Shift interlock)

As for the door:
Could be the crack as mic canic points out or a sheared pin. Check the
door also. Jeep had a series of crappy welds. Don't show any recall data
for that.

> randy1128@webtv.net wrote:
>
>> Has anyone here had a problem with a sagging drivers door? I can move
>> mine up and down about 1/2in
>> Do i need new hinges or just the pins, and is this something i should
>> have the dealer fix.
>> The other problem is my shifter, when it's in park sometimes the motor
>> won't start, but if i move it back and forth, (there is about a 1/2in of
>> movement in the shfter when in park) the motor will start up fine.
>> I was thinking it might be the neutral safety switch, but i just picked
>> up a haines manual and it shows a adjustment for the shifter. Anyone
>> ever had to fix this?
>> Thanks

 

mic canic did pass the time by typing:
> check the a pillar for cracks and the floor shifter just might be a recall
> issue call your local dealer

For the starting problem:
No recall that I see, just the park/neutral safety switch or link out of whack.
But on that subject there was at least one recall in that area. (Shift interlock)

As for the door:
Could be the crack as mic canic points out or a sheared pin. Check the
door also. Jeep had a series of crappy welds. Don't show any recall data
for that.

> randy1128@webtv.net wrote:
>
>> Has anyone here had a problem with a sagging drivers door? I can move
>> mine up and down about 1/2in
>> Do i need new hinges or just the pins, and is this something i should
>> have the dealer fix.
>> The other problem is my shifter, when it's in park sometimes the motor
>> won't start, but if i move it back and forth, (there is about a 1/2in of
>> movement in the shfter when in park) the motor will start up fine.
>> I was thinking it might be the neutral safety switch, but i just picked
>> up a haines manual and it shows a adjustment for the shifter. Anyone
>> ever had to fix this?
>> Thanks

 

mic canic did pass the time by typing:
> check the a pillar for cracks and the floor shifter just might be a recall
> issue call your local dealer

For the starting problem:
No recall that I see, just the park/neutral safety switch or link out of whack.
But on that subject there was at least one recall in that area. (Shift interlock)

As for the door:
Could be the crack as mic canic points out or a sheared pin. Check the
door also. Jeep had a series of crappy welds. Don't show any recall data
for that.

> randy1128@webtv.net wrote:
>
>> Has anyone here had a problem with a sagging drivers door? I can move
>> mine up and down about 1/2in
>> Do i need new hinges or just the pins, and is this something i should
>> have the dealer fix.
>> The other problem is my shifter, when it's in park sometimes the motor
>> won't start, but if i move it back and forth, (there is about a 1/2in of
>> movement in the shfter when in park) the motor will start up fine.
>> I was thinking it might be the neutral safety switch, but i just picked
>> up a haines manual and it shows a adjustment for the shifter. Anyone
>> ever had to fix this?
>> Thanks