twin stick shifter for xfer case
10-13-2003, 04:50 PM
#1
Guest
Posts: n/a
twin stick shifter for xfer case
Is the purpose of this to allow you to run 2WD low? Like with one
stick you have 2WD(high), and 4WD(high and low) but with the two stick
shifter you can also do 2WD low? I've bought some books and am
reading through them and will probably hit the answer to this soon,
but I've been wondering about this for a few days now. Thanks for
putting up with the newbie questions.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
stick you have 2WD(high), and 4WD(high and low) but with the two stick
shifter you can also do 2WD low? I've bought some books and am
reading through them and will probably hit the answer to this soon,
but I've been wondering about this for a few days now. Thanks for
putting up with the newbie questions.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-13-2003, 04:57 PM
#2
Guest
Posts: n/a
Re: twin stick shifter for xfer case
Or front only, Real Jeeps with the Dana 18 use a lock out pin to
keep their Jeepers from using High rear and low front together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
keep their Jeepers from using High rear and low front together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-13-2003, 04:57 PM
#3
Guest
Posts: n/a
Re: twin stick shifter for xfer case
Or front only, Real Jeeps with the Dana 18 use a lock out pin to
keep their Jeepers from using High rear and low front together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
keep their Jeepers from using High rear and low front together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-13-2003, 04:57 PM
#4
Guest
Posts: n/a
Re: twin stick shifter for xfer case
Or front only, Real Jeeps with the Dana 18 use a lock out pin to
keep their Jeepers from using High rear and low front together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
keep their Jeepers from using High rear and low front together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-14-2003, 09:57 AM
#5
Guest
Posts: n/a
Re: twin stick shifter for xfer case
If you have manual hubs, you already have 2 wd low.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-14-2003, 09:57 AM
#6
Guest
Posts: n/a
Re: twin stick shifter for xfer case
If you have manual hubs, you already have 2 wd low.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-14-2003, 09:57 AM
#7
Guest
Posts: n/a
Re: twin stick shifter for xfer case
If you have manual hubs, you already have 2 wd low.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-14-2003, 09:38 PM
#8
Guest
Posts: n/a
Re: twin stick shifter for xfer case
"travis" <travist34removethis@hotmail.com> wrote in message
news:ns3mov49vuhgd14544ts3ceuiv5tc4sdt9@4ax.com...
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
>
>
Yes. In addition to the normal selections of 2 and 4 Hi and 4Lo, you also
get 2Lo and 2Lo FWD, for a total of 5 different selections.
10-14-2003, 09:38 PM
#9
Guest
Posts: n/a
Re: twin stick shifter for xfer case
"travis" <travist34removethis@hotmail.com> wrote in message
news:ns3mov49vuhgd14544ts3ceuiv5tc4sdt9@4ax.com...
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
>
>
Yes. In addition to the normal selections of 2 and 4 Hi and 4Lo, you also
get 2Lo and 2Lo FWD, for a total of 5 different selections.
10-14-2003, 09:38 PM
#10
Guest
Posts: n/a
Re: twin stick shifter for xfer case
"travis" <travist34removethis@hotmail.com> wrote in message
news:ns3mov49vuhgd14544ts3ceuiv5tc4sdt9@4ax.com...
> Is the purpose of this to allow you to run 2WD low? Like with one
> stick you have 2WD(high), and 4WD(high and low) but with the two stick
> shifter you can also do 2WD low? I've bought some books and am
> reading through them and will probably hit the answer to this soon,
> but I've been wondering about this for a few days now. Thanks for
> putting up with the newbie questions.
>
>
>
Yes. In addition to the normal selections of 2 and 4 Hi and 4Lo, you also
get 2Lo and 2Lo FWD, for a total of 5 different selections.
Thread
Thread Starter
Forum
Replies
Last Post
travis
Jeep Mailing List
45
10-15-2003 06:19 PM
Michael Vincenty
Jeep Mailing List
0
08-16-2003 10:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)