To those who have relocated their TJ soundbars...
10-23-2004, 11:09 PM
#2
Guest
Posts: n/a
Re: To those who have relocated their TJ soundbars...
"E. Jason Brooks" <scriptlizard@nospizamscriptlizard.com> wrote in message news:<mbBed.17506$1f.4677@tornado.tampabay.rr.com> ...
> What did you do with that section of sport bar padding where you moved the
> soundbar to and what did you about the screw holes left in the original
> location?
1) The original screw holes - I screwed back the orignal screws, thus
it is sealed and I just put a bit of black caulking on it to hide
them. So now there is a gap of about 8" from where the padding ends
to the rollbar.
2) I put the soundbar over the orignial padding. I did not want to
cut any thing or remove anything. The velcro from the sound bar goes
over the original padding, then I drill 1 hole into the rollbar using
the soundbar hole ( there are 2 mounting holes on the sound bar)and
used a rivet to hold it in place.
> What did you do with that section of sport bar padding where you moved the
> soundbar to and what did you about the screw holes left in the original
> location?
1) The original screw holes - I screwed back the orignal screws, thus
it is sealed and I just put a bit of black caulking on it to hide
them. So now there is a gap of about 8" from where the padding ends
to the rollbar.
2) I put the soundbar over the orignial padding. I did not want to
cut any thing or remove anything. The velcro from the sound bar goes
over the original padding, then I drill 1 hole into the rollbar using
the soundbar hole ( there are 2 mounting holes on the sound bar)and
used a rivet to hold it in place.
10-23-2004, 11:09 PM
#3
Guest
Posts: n/a
Re: To those who have relocated their TJ soundbars...
"E. Jason Brooks" <scriptlizard@nospizamscriptlizard.com> wrote in message news:<mbBed.17506$1f.4677@tornado.tampabay.rr.com> ...
> What did you do with that section of sport bar padding where you moved the
> soundbar to and what did you about the screw holes left in the original
> location?
1) The original screw holes - I screwed back the orignal screws, thus
it is sealed and I just put a bit of black caulking on it to hide
them. So now there is a gap of about 8" from where the padding ends
to the rollbar.
2) I put the soundbar over the orignial padding. I did not want to
cut any thing or remove anything. The velcro from the sound bar goes
over the original padding, then I drill 1 hole into the rollbar using
the soundbar hole ( there are 2 mounting holes on the sound bar)and
used a rivet to hold it in place.
> What did you do with that section of sport bar padding where you moved the
> soundbar to and what did you about the screw holes left in the original
> location?
1) The original screw holes - I screwed back the orignal screws, thus
it is sealed and I just put a bit of black caulking on it to hide
them. So now there is a gap of about 8" from where the padding ends
to the rollbar.
2) I put the soundbar over the orignial padding. I did not want to
cut any thing or remove anything. The velcro from the sound bar goes
over the original padding, then I drill 1 hole into the rollbar using
the soundbar hole ( there are 2 mounting holes on the sound bar)and
used a rivet to hold it in place.
10-23-2004, 11:09 PM
#4
Guest
Posts: n/a
Re: To those who have relocated their TJ soundbars...
"E. Jason Brooks" <scriptlizard@nospizamscriptlizard.com> wrote in message news:<mbBed.17506$1f.4677@tornado.tampabay.rr.com> ...
> What did you do with that section of sport bar padding where you moved the
> soundbar to and what did you about the screw holes left in the original
> location?
1) The original screw holes - I screwed back the orignal screws, thus
it is sealed and I just put a bit of black caulking on it to hide
them. So now there is a gap of about 8" from where the padding ends
to the rollbar.
2) I put the soundbar over the orignial padding. I did not want to
cut any thing or remove anything. The velcro from the sound bar goes
over the original padding, then I drill 1 hole into the rollbar using
the soundbar hole ( there are 2 mounting holes on the sound bar)and
used a rivet to hold it in place.
> What did you do with that section of sport bar padding where you moved the
> soundbar to and what did you about the screw holes left in the original
> location?
1) The original screw holes - I screwed back the orignal screws, thus
it is sealed and I just put a bit of black caulking on it to hide
them. So now there is a gap of about 8" from where the padding ends
to the rollbar.
2) I put the soundbar over the orignial padding. I did not want to
cut any thing or remove anything. The velcro from the sound bar goes
over the original padding, then I drill 1 hole into the rollbar using
the soundbar hole ( there are 2 mounting holes on the sound bar)and
used a rivet to hold it in place.
Thread
Thread Starter
Forum
Replies
Last Post
Pinku-Sensei
Jeep Mailing List
116
09-24-2007 10:15 PM
ejdadjmc
General Jeep and Tech Talk.
2
05-29-2007 09:28 PM
Jerry Bransford
Jeep Mailing List
0
12-06-2003 09:13 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
