To those who have relocated their TJ soundbars...
 

What did you do with that section of sport bar padding where you moved the
soundbar to and what did you about the screw holes left in the original
location?

Re: To those who have relocated their TJ soundbars...
 

"E. Jason Brooks" <scriptlizard@nospizamscriptlizard.com> wrote in message news:<mbBed.17506$1f.4677@tornado.tampabay.rr.com> ...
> What did you do with that section of sport bar padding where you moved the
> soundbar to and what did you about the screw holes left in the original
> location?

1) The original screw holes - I screwed back the orignal screws, thus
it is sealed and I just put a bit of black caulking on it to hide
them. So now there is a gap of about 8" from where the padding ends
to the rollbar.

2) I put the soundbar over the orignial padding. I did not want to
cut any thing or remove anything. The velcro from the sound bar goes
over the original padding, then I drill 1 hole into the rollbar using
the soundbar hole ( there are 2 mounting holes on the sound bar)and
used a rivet to hold it in place.

Re: To those who have relocated their TJ soundbars...
 

"E. Jason Brooks" <scriptlizard@nospizamscriptlizard.com> wrote in message news:<mbBed.17506$1f.4677@tornado.tampabay.rr.com> ...
> What did you do with that section of sport bar padding where you moved the
> soundbar to and what did you about the screw holes left in the original
> location?

1) The original screw holes - I screwed back the orignal screws, thus
it is sealed and I just put a bit of black caulking on it to hide
them. So now there is a gap of about 8" from where the padding ends
to the rollbar.

2) I put the soundbar over the orignial padding. I did not want to
cut any thing or remove anything. The velcro from the sound bar goes
over the original padding, then I drill 1 hole into the rollbar using
the soundbar hole ( there are 2 mounting holes on the sound bar)and
used a rivet to hold it in place.

Re: To those who have relocated their TJ soundbars...
 

"E. Jason Brooks" <scriptlizard@nospizamscriptlizard.com> wrote in message news:<mbBed.17506$1f.4677@tornado.tampabay.rr.com> ...
> What did you do with that section of sport bar padding where you moved the
> soundbar to and what did you about the screw holes left in the original
> location?

1) The original screw holes - I screwed back the orignal screws, thus
it is sealed and I just put a bit of black caulking on it to hide
them. So now there is a gap of about 8" from where the padding ends
to the rollbar.

2) I put the soundbar over the orignial padding. I did not want to
cut any thing or remove anything. The velcro from the sound bar goes
over the original padding, then I drill 1 hole into the rollbar using
the soundbar hole ( there are 2 mounting holes on the sound bar)and
used a rivet to hold it in place.