Teraflex Sway Bar Disconnect Washer Fit?
Guest
Posts: n/a
Re: Teraflex Sway Bar Disconnect Washer Fit?
Barry,
Those are often a snug fit. Just slip on the washer and use a big plier
to squeeze together the whole contraption (washer/bushing/etc) and you
should see enough of the hole to slip in the pin.
Regards,
Guri Sandhu
Those are often a snug fit. Just slip on the washer and use a big plier
to squeeze together the whole contraption (washer/bushing/etc) and you
should see enough of the hole to slip in the pin.
Regards,
Guri Sandhu
Guest
Posts: n/a
Re: Teraflex Sway Bar Disconnect Washer Fit?
Barry,
Those are often a snug fit. Just slip on the washer and use a big plier
to squeeze together the whole contraption (washer/bushing/etc) and you
should see enough of the hole to slip in the pin.
Regards,
Guri Sandhu
Those are often a snug fit. Just slip on the washer and use a big plier
to squeeze together the whole contraption (washer/bushing/etc) and you
should see enough of the hole to slip in the pin.
Regards,
Guri Sandhu
Guest
Posts: n/a
Re: Teraflex Sway Bar Disconnect Washer Fit?
Barry,
Those are often a snug fit. Just slip on the washer and use a big plier
to squeeze together the whole contraption (washer/bushing/etc) and you
should see enough of the hole to slip in the pin.
Regards,
Guri Sandhu
Those are often a snug fit. Just slip on the washer and use a big plier
to squeeze together the whole contraption (washer/bushing/etc) and you
should see enough of the hole to slip in the pin.
Regards,
Guri Sandhu
Guest
Posts: n/a
Re: Teraflex Sway Bar Disconnect Washer Fit?
Channel locks should work perfect:
http://www.----------.com/frontEndPliers.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
sandhug@worldnet.att.net wrote:
>
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
http://www.----------.com/frontEndPliers.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
sandhug@worldnet.att.net wrote:
>
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
Guest
Posts: n/a
Re: Teraflex Sway Bar Disconnect Washer Fit?
Channel locks should work perfect:
http://www.----------.com/frontEndPliers.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
sandhug@worldnet.att.net wrote:
>
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
http://www.----------.com/frontEndPliers.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
sandhug@worldnet.att.net wrote:
>
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
Guest
Posts: n/a
Re: Teraflex Sway Bar Disconnect Washer Fit?
Channel locks should work perfect:
http://www.----------.com/frontEndPliers.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
sandhug@worldnet.att.net wrote:
>
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
http://www.----------.com/frontEndPliers.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
sandhug@worldnet.att.net wrote:
>
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
Guest
Posts: n/a
Re: Teraflex Sway Bar Disconnect Washer Fit?
Channel locks should work perfect:
http://www.----------.com/frontEndPliers.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
sandhug@worldnet.att.net wrote:
>
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
http://www.----------.com/frontEndPliers.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
sandhug@worldnet.att.net wrote:
>
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
Guest
Posts: n/a
Re: Teraflex Sway Bar Disconnect Washer Fit?
sandhug@worldnet.att.net wrote:
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
>
Excellent suggestion! I'll try that this weekend.
Thanks again,
Barry
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
>
Excellent suggestion! I'll try that this weekend.
Thanks again,
Barry
Guest
Posts: n/a
Re: Teraflex Sway Bar Disconnect Washer Fit?
sandhug@worldnet.att.net wrote:
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
>
Excellent suggestion! I'll try that this weekend.
Thanks again,
Barry
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
>
Excellent suggestion! I'll try that this weekend.
Thanks again,
Barry
Guest
Posts: n/a
Re: Teraflex Sway Bar Disconnect Washer Fit?
sandhug@worldnet.att.net wrote:
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
>
Excellent suggestion! I'll try that this weekend.
Thanks again,
Barry
> Barry,
> Those are often a snug fit. Just slip on the washer and use a big plier
> to squeeze together the whole contraption (washer/bushing/etc) and you
> should see enough of the hole to slip in the pin.
> Regards,
>
> Guri Sandhu
>
Excellent suggestion! I'll try that this weekend.
Thanks again,
Barry
