T18/Dana300 swap update
#31
Guest
Posts: n/a
Re: T18/Dana300 swap update
>when I ask the parts store that I want a clutch for that
>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
> I should get a clutch that works ... or get the "we don't carry that"
>answer, right ?
Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
numbers are the same for both engines. My recollection is that they are the
same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
tranny), the parts guy won't have a clue what you are talking about because
there are no such animals in his parts book.
>do you mean the overall height ?
yes.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
> I should get a clutch that works ... or get the "we don't carry that"
>answer, right ?
Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
numbers are the same for both engines. My recollection is that they are the
same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
tranny), the parts guy won't have a clue what you are talking about because
there are no such animals in his parts book.
>do you mean the overall height ?
yes.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
#32
Guest
Posts: n/a
Re: T18/Dana300 swap update
Ok cool...
I called them, and they have it/them.. but I was asked : "with a
10.5" or 11" disc ?"
So what is it that originally is in there ?
thanks,
Ron
Robert Bills wrote:
>>when I ask the parts store that I want a clutch for that
>>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
>> I should get a clutch that works ... or get the "we don't carry that"
>>answer, right ?
>
>
> Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> numbers are the same for both engines. My recollection is that they are the
> same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> tranny), the parts guy won't have a clue what you are talking about because
> there are no such animals in his parts book.
>
>
>>do you mean the overall height ?
>
>
> yes.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
I called them, and they have it/them.. but I was asked : "with a
10.5" or 11" disc ?"
So what is it that originally is in there ?
thanks,
Ron
Robert Bills wrote:
>>when I ask the parts store that I want a clutch for that
>>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
>> I should get a clutch that works ... or get the "we don't carry that"
>>answer, right ?
>
>
> Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> numbers are the same for both engines. My recollection is that they are the
> same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> tranny), the parts guy won't have a clue what you are talking about because
> there are no such animals in his parts book.
>
>
>>do you mean the overall height ?
>
>
> yes.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
#33
Guest
Posts: n/a
Re: T18/Dana300 swap update
Ok cool...
I called them, and they have it/them.. but I was asked : "with a
10.5" or 11" disc ?"
So what is it that originally is in there ?
thanks,
Ron
Robert Bills wrote:
>>when I ask the parts store that I want a clutch for that
>>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
>> I should get a clutch that works ... or get the "we don't carry that"
>>answer, right ?
>
>
> Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> numbers are the same for both engines. My recollection is that they are the
> same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> tranny), the parts guy won't have a clue what you are talking about because
> there are no such animals in his parts book.
>
>
>>do you mean the overall height ?
>
>
> yes.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
I called them, and they have it/them.. but I was asked : "with a
10.5" or 11" disc ?"
So what is it that originally is in there ?
thanks,
Ron
Robert Bills wrote:
>>when I ask the parts store that I want a clutch for that
>>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
>> I should get a clutch that works ... or get the "we don't carry that"
>>answer, right ?
>
>
> Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> numbers are the same for both engines. My recollection is that they are the
> same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> tranny), the parts guy won't have a clue what you are talking about because
> there are no such animals in his parts book.
>
>
>>do you mean the overall height ?
>
>
> yes.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
#34
Guest
Posts: n/a
Re: T18/Dana300 swap update
Ok cool...
I called them, and they have it/them.. but I was asked : "with a
10.5" or 11" disc ?"
So what is it that originally is in there ?
thanks,
Ron
Robert Bills wrote:
>>when I ask the parts store that I want a clutch for that
>>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
>> I should get a clutch that works ... or get the "we don't carry that"
>>answer, right ?
>
>
> Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> numbers are the same for both engines. My recollection is that they are the
> same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> tranny), the parts guy won't have a clue what you are talking about because
> there are no such animals in his parts book.
>
>
>>do you mean the overall height ?
>
>
> yes.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
I called them, and they have it/them.. but I was asked : "with a
10.5" or 11" disc ?"
So what is it that originally is in there ?
thanks,
Ron
Robert Bills wrote:
>>when I ask the parts store that I want a clutch for that
>>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
>> I should get a clutch that works ... or get the "we don't carry that"
>>answer, right ?
>
>
> Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> numbers are the same for both engines. My recollection is that they are the
> same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> tranny), the parts guy won't have a clue what you are talking about because
> there are no such animals in his parts book.
>
>
>>do you mean the overall height ?
>
>
> yes.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
#35
Guest
Posts: n/a
Re: T18/Dana300 swap update
You need to measure the mark on the flywheel from the last clutch.
What was originally in there has no bearing 20 or more years later in a
Jeep.
Or get the flywheel turned 'flat' and buy an all new clutch and pressure
plate of either size.
The pressure plate will also be bigger if the clutch is bigger.
I just helped a friend do his and got asked the same so measured... the
damn plate was 10.75". Go figure. We went with the 10.5" to be on the
safe side....
No clue where the last clutch and pressure plate came from. This was an
'imported' 4 speed tranny put into an 82.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ron Croonenberg wrote:
>
> Ok cool...
>
> I called them, and they have it/them.. but I was asked : "with a
> 10.5" or 11" disc ?"
>
> So what is it that originally is in there ?
>
> thanks,
>
> Ron
>
> Robert Bills wrote:
> >>when I ask the parts store that I want a clutch for that
> >>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
> >> I should get a clutch that works ... or get the "we don't carry that"
> >>answer, right ?
> >
> >
> > Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> > V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> > numbers are the same for both engines. My recollection is that they are the
> > same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> > tranny), the parts guy won't have a clue what you are talking about because
> > there are no such animals in his parts book.
> >
> >
> >>do you mean the overall height ?
> >
> >
> > yes.
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com
What was originally in there has no bearing 20 or more years later in a
Jeep.
Or get the flywheel turned 'flat' and buy an all new clutch and pressure
plate of either size.
The pressure plate will also be bigger if the clutch is bigger.
I just helped a friend do his and got asked the same so measured... the
damn plate was 10.75". Go figure. We went with the 10.5" to be on the
safe side....
No clue where the last clutch and pressure plate came from. This was an
'imported' 4 speed tranny put into an 82.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ron Croonenberg wrote:
>
> Ok cool...
>
> I called them, and they have it/them.. but I was asked : "with a
> 10.5" or 11" disc ?"
>
> So what is it that originally is in there ?
>
> thanks,
>
> Ron
>
> Robert Bills wrote:
> >>when I ask the parts store that I want a clutch for that
> >>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
> >> I should get a clutch that works ... or get the "we don't carry that"
> >>answer, right ?
> >
> >
> > Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> > V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> > numbers are the same for both engines. My recollection is that they are the
> > same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> > tranny), the parts guy won't have a clue what you are talking about because
> > there are no such animals in his parts book.
> >
> >
> >>do you mean the overall height ?
> >
> >
> > yes.
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com
#36
Guest
Posts: n/a
Re: T18/Dana300 swap update
You need to measure the mark on the flywheel from the last clutch.
What was originally in there has no bearing 20 or more years later in a
Jeep.
Or get the flywheel turned 'flat' and buy an all new clutch and pressure
plate of either size.
The pressure plate will also be bigger if the clutch is bigger.
I just helped a friend do his and got asked the same so measured... the
damn plate was 10.75". Go figure. We went with the 10.5" to be on the
safe side....
No clue where the last clutch and pressure plate came from. This was an
'imported' 4 speed tranny put into an 82.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ron Croonenberg wrote:
>
> Ok cool...
>
> I called them, and they have it/them.. but I was asked : "with a
> 10.5" or 11" disc ?"
>
> So what is it that originally is in there ?
>
> thanks,
>
> Ron
>
> Robert Bills wrote:
> >>when I ask the parts store that I want a clutch for that
> >>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
> >> I should get a clutch that works ... or get the "we don't carry that"
> >>answer, right ?
> >
> >
> > Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> > V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> > numbers are the same for both engines. My recollection is that they are the
> > same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> > tranny), the parts guy won't have a clue what you are talking about because
> > there are no such animals in his parts book.
> >
> >
> >>do you mean the overall height ?
> >
> >
> > yes.
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com
What was originally in there has no bearing 20 or more years later in a
Jeep.
Or get the flywheel turned 'flat' and buy an all new clutch and pressure
plate of either size.
The pressure plate will also be bigger if the clutch is bigger.
I just helped a friend do his and got asked the same so measured... the
damn plate was 10.75". Go figure. We went with the 10.5" to be on the
safe side....
No clue where the last clutch and pressure plate came from. This was an
'imported' 4 speed tranny put into an 82.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ron Croonenberg wrote:
>
> Ok cool...
>
> I called them, and they have it/them.. but I was asked : "with a
> 10.5" or 11" disc ?"
>
> So what is it that originally is in there ?
>
> thanks,
>
> Ron
>
> Robert Bills wrote:
> >>when I ask the parts store that I want a clutch for that
> >>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
> >> I should get a clutch that works ... or get the "we don't carry that"
> >>answer, right ?
> >
> >
> > Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> > V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> > numbers are the same for both engines. My recollection is that they are the
> > same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> > tranny), the parts guy won't have a clue what you are talking about because
> > there are no such animals in his parts book.
> >
> >
> >>do you mean the overall height ?
> >
> >
> > yes.
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com
#37
Guest
Posts: n/a
Re: T18/Dana300 swap update
You need to measure the mark on the flywheel from the last clutch.
What was originally in there has no bearing 20 or more years later in a
Jeep.
Or get the flywheel turned 'flat' and buy an all new clutch and pressure
plate of either size.
The pressure plate will also be bigger if the clutch is bigger.
I just helped a friend do his and got asked the same so measured... the
damn plate was 10.75". Go figure. We went with the 10.5" to be on the
safe side....
No clue where the last clutch and pressure plate came from. This was an
'imported' 4 speed tranny put into an 82.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ron Croonenberg wrote:
>
> Ok cool...
>
> I called them, and they have it/them.. but I was asked : "with a
> 10.5" or 11" disc ?"
>
> So what is it that originally is in there ?
>
> thanks,
>
> Ron
>
> Robert Bills wrote:
> >>when I ask the parts store that I want a clutch for that
> >>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
> >> I should get a clutch that works ... or get the "we don't carry that"
> >>answer, right ?
> >
> >
> > Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> > V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> > numbers are the same for both engines. My recollection is that they are the
> > same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> > tranny), the parts guy won't have a clue what you are talking about because
> > there are no such animals in his parts book.
> >
> >
> >>do you mean the overall height ?
> >
> >
> > yes.
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com
What was originally in there has no bearing 20 or more years later in a
Jeep.
Or get the flywheel turned 'flat' and buy an all new clutch and pressure
plate of either size.
The pressure plate will also be bigger if the clutch is bigger.
I just helped a friend do his and got asked the same so measured... the
damn plate was 10.75". Go figure. We went with the 10.5" to be on the
safe side....
No clue where the last clutch and pressure plate came from. This was an
'imported' 4 speed tranny put into an 82.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ron Croonenberg wrote:
>
> Ok cool...
>
> I called them, and they have it/them.. but I was asked : "with a
> 10.5" or 11" disc ?"
>
> So what is it that originally is in there ?
>
> thanks,
>
> Ron
>
> Robert Bills wrote:
> >>when I ask the parts store that I want a clutch for that
> >>application, 258 - T150 bellhousing - Borg Warner T18 for a '79 CJ5 then
> >> I should get a clutch that works ... or get the "we don't carry that"
> >>answer, right ?
> >
> >
> > Ask for a clutch for a '79 CJ-7 with T-150 transmission. Since there were both
> > V-8 and inline 6 engines in '79, you might want to confirm that the clutch part
> > numbers are the same for both engines. My recollection is that they are the
> > same. If you ask for what you actually have (258/T-150 Bellhousing and T-18
> > tranny), the parts guy won't have a clue what you are talking about because
> > there are no such animals in his parts book.
> >
> >
> >>do you mean the overall height ?
> >
> >
> > yes.
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com
#38
Guest
Posts: n/a
Re: T18/Dana300 swap update
>"with a
>10.5" or 11" disc ?"
Get the 10.5.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>10.5" or 11" disc ?"
Get the 10.5.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
#39
Guest
Posts: n/a
Re: T18/Dana300 swap update
>"with a
>10.5" or 11" disc ?"
Get the 10.5.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>10.5" or 11" disc ?"
Get the 10.5.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
#40
Guest
Posts: n/a
Re: T18/Dana300 swap update
>"with a
>10.5" or 11" disc ?"
Get the 10.5.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>10.5" or 11" disc ?"
Get the 10.5.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com