Swapping YJ rears?
#21
Guest
Posts: n/a
Re: Swapping YJ rears?
Yes, it should be a direct swap ...
"Greg" <greglc84@hotmail.com> wrote in message
news:Cf6id.104983$nl.16301@pd7tw3no...
> I told him to do the one wheel, two spin count, I forgot it was the 4cyl
> that probably had the 4:10s, don't know what he has. As we just had a
garage
> sale it's all nice and clean in there so I will get him to pull in and
I'll
> stick the jack under there and do a count when he comes. So assuming it is
> 4:10 all other swapping from a 95 to an 88 should be straight across.
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:x9Zhd.100688$nl.37977@pd7tw3no...
> > We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> > and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> > the cost to swap others in, and wants to know if this one will fit, I
said
> > I thought it would. So am I right that he would have 4:10s stock in his,
> > same as my daughter's, and if so is there any other reason why this
> > wouldn't just be an easy swap over.
> >
>
>
"Greg" <greglc84@hotmail.com> wrote in message
news:Cf6id.104983$nl.16301@pd7tw3no...
> I told him to do the one wheel, two spin count, I forgot it was the 4cyl
> that probably had the 4:10s, don't know what he has. As we just had a
garage
> sale it's all nice and clean in there so I will get him to pull in and
I'll
> stick the jack under there and do a count when he comes. So assuming it is
> 4:10 all other swapping from a 95 to an 88 should be straight across.
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:x9Zhd.100688$nl.37977@pd7tw3no...
> > We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> > and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> > the cost to swap others in, and wants to know if this one will fit, I
said
> > I thought it would. So am I right that he would have 4:10s stock in his,
> > same as my daughter's, and if so is there any other reason why this
> > wouldn't just be an easy swap over.
> >
>
>
#22
Guest
Posts: n/a
Re: Swapping YJ rears?
Yes, it should be a direct swap ...
"Greg" <greglc84@hotmail.com> wrote in message
news:Cf6id.104983$nl.16301@pd7tw3no...
> I told him to do the one wheel, two spin count, I forgot it was the 4cyl
> that probably had the 4:10s, don't know what he has. As we just had a
garage
> sale it's all nice and clean in there so I will get him to pull in and
I'll
> stick the jack under there and do a count when he comes. So assuming it is
> 4:10 all other swapping from a 95 to an 88 should be straight across.
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:x9Zhd.100688$nl.37977@pd7tw3no...
> > We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> > and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> > the cost to swap others in, and wants to know if this one will fit, I
said
> > I thought it would. So am I right that he would have 4:10s stock in his,
> > same as my daughter's, and if so is there any other reason why this
> > wouldn't just be an easy swap over.
> >
>
>
"Greg" <greglc84@hotmail.com> wrote in message
news:Cf6id.104983$nl.16301@pd7tw3no...
> I told him to do the one wheel, two spin count, I forgot it was the 4cyl
> that probably had the 4:10s, don't know what he has. As we just had a
garage
> sale it's all nice and clean in there so I will get him to pull in and
I'll
> stick the jack under there and do a count when he comes. So assuming it is
> 4:10 all other swapping from a 95 to an 88 should be straight across.
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:x9Zhd.100688$nl.37977@pd7tw3no...
> > We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> > and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> > the cost to swap others in, and wants to know if this one will fit, I
said
> > I thought it would. So am I right that he would have 4:10s stock in his,
> > same as my daughter's, and if so is there any other reason why this
> > wouldn't just be an easy swap over.
> >
>
>
#23
Guest
Posts: n/a
Re: Swapping YJ rears?
Well, as I found out, it doesn't realy matter to him what gears. He came
by last night with the money, I said did you find out what gears you have,
he said no, I said well pull it into the garage and I'll roll the floor jack
under and we'll find out, he said no that's ok, I talked to a freind that
said he thinks they are all pretty much the same, I said no, he said well if
it's not then I will drive in two wheel drive till I can afford to do the
front. So that's about as hard as I am willing to try to make sure it fits
before he buys it.
By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
considering I see them on ebay for $5.00 starting bid with no bidders, and
we are in a small town that is two ferry rides from anywhere, on a dead end
road, so the chances of selling this was slim, and she didn't advertise it,
he came to our garage sale last Saturday.
"CRWLR" <beerman@yahoo.com> wrote in message
news:10oio0cf8ekqn7d@corp.supernews.com...
> Yes, it should be a direct swap ...
>
>
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:Cf6id.104983$nl.16301@pd7tw3no...
>> I told him to do the one wheel, two spin count, I forgot it was the
>> 4cyl
>> that probably had the 4:10s, don't know what he has. As we just had a
> garage
>> sale it's all nice and clean in there so I will get him to pull in and
> I'll
>> stick the jack under there and do a count when he comes. So assuming it
>> is
>> 4:10 all other swapping from a 95 to an 88 should be straight across.
>>
>> "Greg" <greglc84@hotmail.com> wrote in message
>> news:x9Zhd.100688$nl.37977@pd7tw3no...
>> > We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
>> > and looked at her 35, said his is shot in his 88 YJ, and he can't
>> > afford
>> > the cost to swap others in, and wants to know if this one will fit, I
> said
>> > I thought it would. So am I right that he would have 4:10s stock in
>> > his,
>> > same as my daughter's, and if so is there any other reason why this
>> > wouldn't just be an easy swap over.
>> >
>>
>>
>
>
by last night with the money, I said did you find out what gears you have,
he said no, I said well pull it into the garage and I'll roll the floor jack
under and we'll find out, he said no that's ok, I talked to a freind that
said he thinks they are all pretty much the same, I said no, he said well if
it's not then I will drive in two wheel drive till I can afford to do the
front. So that's about as hard as I am willing to try to make sure it fits
before he buys it.
By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
considering I see them on ebay for $5.00 starting bid with no bidders, and
we are in a small town that is two ferry rides from anywhere, on a dead end
road, so the chances of selling this was slim, and she didn't advertise it,
he came to our garage sale last Saturday.
"CRWLR" <beerman@yahoo.com> wrote in message
news:10oio0cf8ekqn7d@corp.supernews.com...
> Yes, it should be a direct swap ...
>
>
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:Cf6id.104983$nl.16301@pd7tw3no...
>> I told him to do the one wheel, two spin count, I forgot it was the
>> 4cyl
>> that probably had the 4:10s, don't know what he has. As we just had a
> garage
>> sale it's all nice and clean in there so I will get him to pull in and
> I'll
>> stick the jack under there and do a count when he comes. So assuming it
>> is
>> 4:10 all other swapping from a 95 to an 88 should be straight across.
>>
>> "Greg" <greglc84@hotmail.com> wrote in message
>> news:x9Zhd.100688$nl.37977@pd7tw3no...
>> > We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
>> > and looked at her 35, said his is shot in his 88 YJ, and he can't
>> > afford
>> > the cost to swap others in, and wants to know if this one will fit, I
> said
>> > I thought it would. So am I right that he would have 4:10s stock in
>> > his,
>> > same as my daughter's, and if so is there any other reason why this
>> > wouldn't just be an easy swap over.
>> >
>>
>>
>
>
#24
Guest
Posts: n/a
Re: Swapping YJ rears?
Well, as I found out, it doesn't realy matter to him what gears. He came
by last night with the money, I said did you find out what gears you have,
he said no, I said well pull it into the garage and I'll roll the floor jack
under and we'll find out, he said no that's ok, I talked to a freind that
said he thinks they are all pretty much the same, I said no, he said well if
it's not then I will drive in two wheel drive till I can afford to do the
front. So that's about as hard as I am willing to try to make sure it fits
before he buys it.
By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
considering I see them on ebay for $5.00 starting bid with no bidders, and
we are in a small town that is two ferry rides from anywhere, on a dead end
road, so the chances of selling this was slim, and she didn't advertise it,
he came to our garage sale last Saturday.
"CRWLR" <beerman@yahoo.com> wrote in message
news:10oio0cf8ekqn7d@corp.supernews.com...
> Yes, it should be a direct swap ...
>
>
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:Cf6id.104983$nl.16301@pd7tw3no...
>> I told him to do the one wheel, two spin count, I forgot it was the
>> 4cyl
>> that probably had the 4:10s, don't know what he has. As we just had a
> garage
>> sale it's all nice and clean in there so I will get him to pull in and
> I'll
>> stick the jack under there and do a count when he comes. So assuming it
>> is
>> 4:10 all other swapping from a 95 to an 88 should be straight across.
>>
>> "Greg" <greglc84@hotmail.com> wrote in message
>> news:x9Zhd.100688$nl.37977@pd7tw3no...
>> > We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
>> > and looked at her 35, said his is shot in his 88 YJ, and he can't
>> > afford
>> > the cost to swap others in, and wants to know if this one will fit, I
> said
>> > I thought it would. So am I right that he would have 4:10s stock in
>> > his,
>> > same as my daughter's, and if so is there any other reason why this
>> > wouldn't just be an easy swap over.
>> >
>>
>>
>
>
by last night with the money, I said did you find out what gears you have,
he said no, I said well pull it into the garage and I'll roll the floor jack
under and we'll find out, he said no that's ok, I talked to a freind that
said he thinks they are all pretty much the same, I said no, he said well if
it's not then I will drive in two wheel drive till I can afford to do the
front. So that's about as hard as I am willing to try to make sure it fits
before he buys it.
By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
considering I see them on ebay for $5.00 starting bid with no bidders, and
we are in a small town that is two ferry rides from anywhere, on a dead end
road, so the chances of selling this was slim, and she didn't advertise it,
he came to our garage sale last Saturday.
"CRWLR" <beerman@yahoo.com> wrote in message
news:10oio0cf8ekqn7d@corp.supernews.com...
> Yes, it should be a direct swap ...
>
>
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:Cf6id.104983$nl.16301@pd7tw3no...
>> I told him to do the one wheel, two spin count, I forgot it was the
>> 4cyl
>> that probably had the 4:10s, don't know what he has. As we just had a
> garage
>> sale it's all nice and clean in there so I will get him to pull in and
> I'll
>> stick the jack under there and do a count when he comes. So assuming it
>> is
>> 4:10 all other swapping from a 95 to an 88 should be straight across.
>>
>> "Greg" <greglc84@hotmail.com> wrote in message
>> news:x9Zhd.100688$nl.37977@pd7tw3no...
>> > We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
>> > and looked at her 35, said his is shot in his 88 YJ, and he can't
>> > afford
>> > the cost to swap others in, and wants to know if this one will fit, I
> said
>> > I thought it would. So am I right that he would have 4:10s stock in
>> > his,
>> > same as my daughter's, and if so is there any other reason why this
>> > wouldn't just be an easy swap over.
>> >
>>
>>
>
>
#25
Guest
Posts: n/a
Re: Swapping YJ rears?
Hi Greg,
With 4.10, a Dana 35 is actually worth a few bucks. You could have done
much better:
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
Still, it is gone and that's a good thing.
Steve
http://xjeep.dyndns.org
Greg wrote:
> Well, as I found out, it doesn't realy matter to him what gears. He came
> by last night with the money, I said did you find out what gears you have,
> he said no, I said well pull it into the garage and I'll roll the floor jack
> under and we'll find out, he said no that's ok, I talked to a freind that
> said he thinks they are all pretty much the same, I said no, he said well if
> it's not then I will drive in two wheel drive till I can afford to do the
> front. So that's about as hard as I am willing to try to make sure it fits
> before he buys it.
> By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
> considering I see them on ebay for $5.00 starting bid with no bidders, and
> we are in a small town that is two ferry rides from anywhere, on a dead end
> road, so the chances of selling this was slim, and she didn't advertise it,
> he came to our garage sale last Saturday.
With 4.10, a Dana 35 is actually worth a few bucks. You could have done
much better:
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
Still, it is gone and that's a good thing.
Steve
http://xjeep.dyndns.org
Greg wrote:
> Well, as I found out, it doesn't realy matter to him what gears. He came
> by last night with the money, I said did you find out what gears you have,
> he said no, I said well pull it into the garage and I'll roll the floor jack
> under and we'll find out, he said no that's ok, I talked to a freind that
> said he thinks they are all pretty much the same, I said no, he said well if
> it's not then I will drive in two wheel drive till I can afford to do the
> front. So that's about as hard as I am willing to try to make sure it fits
> before he buys it.
> By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
> considering I see them on ebay for $5.00 starting bid with no bidders, and
> we are in a small town that is two ferry rides from anywhere, on a dead end
> road, so the chances of selling this was slim, and she didn't advertise it,
> he came to our garage sale last Saturday.
#26
Guest
Posts: n/a
Re: Swapping YJ rears?
Hi Greg,
With 4.10, a Dana 35 is actually worth a few bucks. You could have done
much better:
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
Still, it is gone and that's a good thing.
Steve
http://xjeep.dyndns.org
Greg wrote:
> Well, as I found out, it doesn't realy matter to him what gears. He came
> by last night with the money, I said did you find out what gears you have,
> he said no, I said well pull it into the garage and I'll roll the floor jack
> under and we'll find out, he said no that's ok, I talked to a freind that
> said he thinks they are all pretty much the same, I said no, he said well if
> it's not then I will drive in two wheel drive till I can afford to do the
> front. So that's about as hard as I am willing to try to make sure it fits
> before he buys it.
> By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
> considering I see them on ebay for $5.00 starting bid with no bidders, and
> we are in a small town that is two ferry rides from anywhere, on a dead end
> road, so the chances of selling this was slim, and she didn't advertise it,
> he came to our garage sale last Saturday.
With 4.10, a Dana 35 is actually worth a few bucks. You could have done
much better:
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
Still, it is gone and that's a good thing.
Steve
http://xjeep.dyndns.org
Greg wrote:
> Well, as I found out, it doesn't realy matter to him what gears. He came
> by last night with the money, I said did you find out what gears you have,
> he said no, I said well pull it into the garage and I'll roll the floor jack
> under and we'll find out, he said no that's ok, I talked to a freind that
> said he thinks they are all pretty much the same, I said no, he said well if
> it's not then I will drive in two wheel drive till I can afford to do the
> front. So that's about as hard as I am willing to try to make sure it fits
> before he buys it.
> By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
> considering I see them on ebay for $5.00 starting bid with no bidders, and
> we are in a small town that is two ferry rides from anywhere, on a dead end
> road, so the chances of selling this was slim, and she didn't advertise it,
> he came to our garage sale last Saturday.
#27
Guest
Posts: n/a
Re: Swapping YJ rears?
At least he didn't have to pay the junk man to take it. Not even
the rice burners use a ring gear smaller than eight inch.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> Hi Greg,
>
> With 4.10, a Dana 35 is actually worth a few bucks. You could have done
> much better:
>
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
>
> Still, it is gone and that's a good thing.
>
> Steve
> http://xjeep.dyndns.org
the rice burners use a ring gear smaller than eight inch.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> Hi Greg,
>
> With 4.10, a Dana 35 is actually worth a few bucks. You could have done
> much better:
>
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
>
> Still, it is gone and that's a good thing.
>
> Steve
> http://xjeep.dyndns.org
#28
Guest
Posts: n/a
Re: Swapping YJ rears?
At least he didn't have to pay the junk man to take it. Not even
the rice burners use a ring gear smaller than eight inch.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> Hi Greg,
>
> With 4.10, a Dana 35 is actually worth a few bucks. You could have done
> much better:
>
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
>
> Still, it is gone and that's a good thing.
>
> Steve
> http://xjeep.dyndns.org
the rice burners use a ring gear smaller than eight inch.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> Hi Greg,
>
> With 4.10, a Dana 35 is actually worth a few bucks. You could have done
> much better:
>
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
>
> Still, it is gone and that's a good thing.
>
> Steve
> http://xjeep.dyndns.org
#29
Guest
Posts: n/a
Re: Swapping YJ rears?
But as I say, I am 2 ferries from anywhere, not many buyers would pay the
shipping from here. Would be approx. $100.00 just to get it to the nearest
city, so I would figure about $150.00 to ship in western Canada and probably
at least another $100.00 to get to US or western Canada, plus then I have to
do that, the shipping that is.
"Steve" <xjlifter@bogus.com> wrote in message
news:2uv1k8F2f1km7U1@uni-berlin.de...
> Hi Greg,
>
> With 4.10, a Dana 35 is actually worth a few bucks. You could have done
> much better:
>
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
>
> Still, it is gone and that's a good thing.
>
> Steve
> http://xjeep.dyndns.org
>
>
> Greg wrote:
>> Well, as I found out, it doesn't realy matter to him what gears. He
>> came by last night with the money, I said did you find out what gears you
>> have, he said no, I said well pull it into the garage and I'll roll the
>> floor jack under and we'll find out, he said no that's ok, I talked to a
>> freind that said he thinks they are all pretty much the same, I said no,
>> he said well if it's not then I will drive in two wheel drive till I can
>> afford to do the front. So that's about as hard as I am willing to try to
>> make sure it fits before he buys it.
>> By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
>> considering I see them on ebay for $5.00 starting bid with no bidders,
>> and we are in a small town that is two ferry rides from anywhere, on a
>> dead end road, so the chances of selling this was slim, and she didn't
>> advertise it, he came to our garage sale last Saturday.
shipping from here. Would be approx. $100.00 just to get it to the nearest
city, so I would figure about $150.00 to ship in western Canada and probably
at least another $100.00 to get to US or western Canada, plus then I have to
do that, the shipping that is.
"Steve" <xjlifter@bogus.com> wrote in message
news:2uv1k8F2f1km7U1@uni-berlin.de...
> Hi Greg,
>
> With 4.10, a Dana 35 is actually worth a few bucks. You could have done
> much better:
>
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
>
> Still, it is gone and that's a good thing.
>
> Steve
> http://xjeep.dyndns.org
>
>
> Greg wrote:
>> Well, as I found out, it doesn't realy matter to him what gears. He
>> came by last night with the money, I said did you find out what gears you
>> have, he said no, I said well pull it into the garage and I'll roll the
>> floor jack under and we'll find out, he said no that's ok, I talked to a
>> freind that said he thinks they are all pretty much the same, I said no,
>> he said well if it's not then I will drive in two wheel drive till I can
>> afford to do the front. So that's about as hard as I am willing to try to
>> make sure it fits before he buys it.
>> By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
>> considering I see them on ebay for $5.00 starting bid with no bidders,
>> and we are in a small town that is two ferry rides from anywhere, on a
>> dead end road, so the chances of selling this was slim, and she didn't
>> advertise it, he came to our garage sale last Saturday.
#30
Guest
Posts: n/a
Re: Swapping YJ rears?
But as I say, I am 2 ferries from anywhere, not many buyers would pay the
shipping from here. Would be approx. $100.00 just to get it to the nearest
city, so I would figure about $150.00 to ship in western Canada and probably
at least another $100.00 to get to US or western Canada, plus then I have to
do that, the shipping that is.
"Steve" <xjlifter@bogus.com> wrote in message
news:2uv1k8F2f1km7U1@uni-berlin.de...
> Hi Greg,
>
> With 4.10, a Dana 35 is actually worth a few bucks. You could have done
> much better:
>
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
>
> Still, it is gone and that's a good thing.
>
> Steve
> http://xjeep.dyndns.org
>
>
> Greg wrote:
>> Well, as I found out, it doesn't realy matter to him what gears. He
>> came by last night with the money, I said did you find out what gears you
>> have, he said no, I said well pull it into the garage and I'll roll the
>> floor jack under and we'll find out, he said no that's ok, I talked to a
>> freind that said he thinks they are all pretty much the same, I said no,
>> he said well if it's not then I will drive in two wheel drive till I can
>> afford to do the front. So that's about as hard as I am willing to try to
>> make sure it fits before he buys it.
>> By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
>> considering I see them on ebay for $5.00 starting bid with no bidders,
>> and we are in a small town that is two ferry rides from anywhere, on a
>> dead end road, so the chances of selling this was slim, and she didn't
>> advertise it, he came to our garage sale last Saturday.
shipping from here. Would be approx. $100.00 just to get it to the nearest
city, so I would figure about $150.00 to ship in western Canada and probably
at least another $100.00 to get to US or western Canada, plus then I have to
do that, the shipping that is.
"Steve" <xjlifter@bogus.com> wrote in message
news:2uv1k8F2f1km7U1@uni-berlin.de...
> Hi Greg,
>
> With 4.10, a Dana 35 is actually worth a few bucks. You could have done
> much better:
>
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7931254047
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7929261337
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930212647
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7928083214
> http://cgi.ebay.com/ebaymotors/ws/eB...tem=7930826662
>
> Still, it is gone and that's a good thing.
>
> Steve
> http://xjeep.dyndns.org
>
>
> Greg wrote:
>> Well, as I found out, it doesn't realy matter to him what gears. He
>> came by last night with the money, I said did you find out what gears you
>> have, he said no, I said well pull it into the garage and I'll roll the
>> floor jack under and we'll find out, he said no that's ok, I talked to a
>> freind that said he thinks they are all pretty much the same, I said no,
>> he said well if it's not then I will drive in two wheel drive till I can
>> afford to do the front. So that's about as hard as I am willing to try to
>> make sure it fits before he buys it.
>> By the way, she got $75.00 Canadian, about $58.00 US for it, not bad
>> considering I see them on ebay for $5.00 starting bid with no bidders,
>> and we are in a small town that is two ferry rides from anywhere, on a
>> dead end road, so the chances of selling this was slim, and she didn't
>> advertise it, he came to our garage sale last Saturday.