Swapping YJ rears?
#1
Guest
Posts: n/a
Swapping YJ rears?
We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
looked at her 35, said his is shot in his 88 YJ, and he can't afford the
cost to swap others in, and wants to know if this one will fit, I said I
thought it would. So am I right that he would have 4:10s stock in his, same
as my daughter's, and if so is there any other reason why this wouldn't just
be an easy swap over.
looked at her 35, said his is shot in his 88 YJ, and he can't afford the
cost to swap others in, and wants to know if this one will fit, I said I
thought it would. So am I right that he would have 4:10s stock in his, same
as my daughter's, and if so is there any other reason why this wouldn't just
be an easy swap over.
#2
Guest
Posts: n/a
Re: Swapping YJ rears?
Hi Greg,
I don't see a problem. There is a difference inside, as yours is an
AMC without "C" clip axles.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
I don't see a problem. There is a difference inside, as yours is an
AMC without "C" clip axles.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
#3
Guest
Posts: n/a
Re: Swapping YJ rears?
Hi Greg,
I don't see a problem. There is a difference inside, as yours is an
AMC without "C" clip axles.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
I don't see a problem. There is a difference inside, as yours is an
AMC without "C" clip axles.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
#4
Guest
Posts: n/a
Re: Swapping YJ rears?
Hi Greg,
I don't see a problem. There is a difference inside, as yours is an
AMC without "C" clip axles.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
I don't see a problem. There is a difference inside, as yours is an
AMC without "C" clip axles.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
#5
Guest
Posts: n/a
Re: Swapping YJ rears?
Don't assume that his has 4.10's as well. Better make sure before you have
mismatched gears.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
mismatched gears.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
#6
Guest
Posts: n/a
Re: Swapping YJ rears?
Don't assume that his has 4.10's as well. Better make sure before you have
mismatched gears.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
mismatched gears.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
#7
Guest
Posts: n/a
Re: Swapping YJ rears?
Don't assume that his has 4.10's as well. Better make sure before you have
mismatched gears.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
mismatched gears.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
#8
Guest
Posts: n/a
Re: Swapping YJ rears?
Should bolt right in. If he has the 4 cylinder, it's a good bet that it has
4.10 gear also. If he has a 6 cylinder then he will have 3.07 or 3.73 gears
which, of course, will be a problem. (My statements assume your discarded
axle has the 4.10 gears.)
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
4.10 gear also. If he has a 6 cylinder then he will have 3.07 or 3.73 gears
which, of course, will be a problem. (My statements assume your discarded
axle has the 4.10 gears.)
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
#9
Guest
Posts: n/a
Re: Swapping YJ rears?
Should bolt right in. If he has the 4 cylinder, it's a good bet that it has
4.10 gear also. If he has a 6 cylinder then he will have 3.07 or 3.73 gears
which, of course, will be a problem. (My statements assume your discarded
axle has the 4.10 gears.)
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
4.10 gear also. If he has a 6 cylinder then he will have 3.07 or 3.73 gears
which, of course, will be a problem. (My statements assume your discarded
axle has the 4.10 gears.)
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
#10
Guest
Posts: n/a
Re: Swapping YJ rears?
Should bolt right in. If he has the 4 cylinder, it's a good bet that it has
4.10 gear also. If he has a 6 cylinder then he will have 3.07 or 3.73 gears
which, of course, will be a problem. (My statements assume your discarded
axle has the 4.10 gears.)
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
4.10 gear also. If he has a 6 cylinder then he will have 3.07 or 3.73 gears
which, of course, will be a problem. (My statements assume your discarded
axle has the 4.10 gears.)
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>