Swapping YJ rears?
11-03-2004, 08:26 AM
#11
Guest
Posts: n/a
Re: Swapping YJ rears?
4.10's are an odd size for stock from what I have seen. I thought those
cane on the 4 bangers or automatics only?
He would need to check his ratio to make sure. I have stock gears and
mine are 3.31's.
He can jack up one rear wheel and spin it twice while counting the
driveshaft revolutions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
cane on the 4 bangers or automatics only?
He would need to check his ratio to make sure. I have stock gears and
mine are 3.31's.
He can jack up one rear wheel and spin it twice while counting the
driveshaft revolutions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
11-03-2004, 08:26 AM
#12
Guest
Posts: n/a
Re: Swapping YJ rears?
4.10's are an odd size for stock from what I have seen. I thought those
cane on the 4 bangers or automatics only?
He would need to check his ratio to make sure. I have stock gears and
mine are 3.31's.
He can jack up one rear wheel and spin it twice while counting the
driveshaft revolutions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
cane on the 4 bangers or automatics only?
He would need to check his ratio to make sure. I have stock gears and
mine are 3.31's.
He can jack up one rear wheel and spin it twice while counting the
driveshaft revolutions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
11-03-2004, 08:26 AM
#13
Guest
Posts: n/a
Re: Swapping YJ rears?
4.10's are an odd size for stock from what I have seen. I thought those
cane on the 4 bangers or automatics only?
He would need to check his ratio to make sure. I have stock gears and
mine are 3.31's.
He can jack up one rear wheel and spin it twice while counting the
driveshaft revolutions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
cane on the 4 bangers or automatics only?
He would need to check his ratio to make sure. I have stock gears and
mine are 3.31's.
He can jack up one rear wheel and spin it twice while counting the
driveshaft revolutions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his, same
> as my daughter's, and if so is there any other reason why this wouldn't just
> be an easy swap over.
11-03-2004, 09:51 AM
#14
Guest
Posts: n/a
Re: Swapping YJ rears?
I told him to do the one wheel, two spin count, I forgot it was the 4cyl
that probably had the 4:10s, don't know what he has. As we just had a garage
sale it's all nice and clean in there so I will get him to pull in and I'll
stick the jack under there and do a count when he comes. So assuming it is
4:10 all other swapping from a 95 to an 88 should be straight across.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
that probably had the 4:10s, don't know what he has. As we just had a garage
sale it's all nice and clean in there so I will get him to pull in and I'll
stick the jack under there and do a count when he comes. So assuming it is
4:10 all other swapping from a 95 to an 88 should be straight across.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
11-03-2004, 09:51 AM
#15
Guest
Posts: n/a
Re: Swapping YJ rears?
I told him to do the one wheel, two spin count, I forgot it was the 4cyl
that probably had the 4:10s, don't know what he has. As we just had a garage
sale it's all nice and clean in there so I will get him to pull in and I'll
stick the jack under there and do a count when he comes. So assuming it is
4:10 all other swapping from a 95 to an 88 should be straight across.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
that probably had the 4:10s, don't know what he has. As we just had a garage
sale it's all nice and clean in there so I will get him to pull in and I'll
stick the jack under there and do a count when he comes. So assuming it is
4:10 all other swapping from a 95 to an 88 should be straight across.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
11-03-2004, 09:51 AM
#16
Guest
Posts: n/a
Re: Swapping YJ rears?
I told him to do the one wheel, two spin count, I forgot it was the 4cyl
that probably had the 4:10s, don't know what he has. As we just had a garage
sale it's all nice and clean in there so I will get him to pull in and I'll
stick the jack under there and do a count when he comes. So assuming it is
4:10 all other swapping from a 95 to an 88 should be straight across.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
that probably had the 4:10s, don't know what he has. As we just had a garage
sale it's all nice and clean in there so I will get him to pull in and I'll
stick the jack under there and do a count when he comes. So assuming it is
4:10 all other swapping from a 95 to an 88 should be straight across.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
> and looked at her 35, said his is shot in his 88 YJ, and he can't afford
> the cost to swap others in, and wants to know if this one will fit, I said
> I thought it would. So am I right that he would have 4:10s stock in his,
> same as my daughter's, and if so is there any other reason why this
> wouldn't just be an easy swap over.
>
11-03-2004, 04:26 PM
#17
Guest
Posts: n/a
Re: Swapping YJ rears?
Also suggest he find the tag bolted to it's cover, pictured:
http://www.----------.com/chrys8dana35covers.jpg The ratio numbers will
not have a decimal point.
God Bless America, ßill O|||||||O
mailto:--------------------
Greg wrote:
>
> I told him to do the one wheel, two spin count, I forgot it was the 4cyl
> that probably had the 4:10s, don't know what he has. As we just had a garage
> sale it's all nice and clean in there so I will get him to pull in and I'll
> stick the jack under there and do a count when he comes. So assuming it is
> 4:10 all other swapping from a 95 to an 88 should be straight across.
http://www.----------.com/chrys8dana35covers.jpg The ratio numbers will
not have a decimal point.
God Bless America, ßill O|||||||O
mailto:--------------------
Greg wrote:
>
> I told him to do the one wheel, two spin count, I forgot it was the 4cyl
> that probably had the 4:10s, don't know what he has. As we just had a garage
> sale it's all nice and clean in there so I will get him to pull in and I'll
> stick the jack under there and do a count when he comes. So assuming it is
> 4:10 all other swapping from a 95 to an 88 should be straight across.
11-03-2004, 04:26 PM
#18
Guest
Posts: n/a
Re: Swapping YJ rears?
Also suggest he find the tag bolted to it's cover, pictured:
http://www.----------.com/chrys8dana35covers.jpg The ratio numbers will
not have a decimal point.
God Bless America, ßill O|||||||O
mailto:--------------------
Greg wrote:
>
> I told him to do the one wheel, two spin count, I forgot it was the 4cyl
> that probably had the 4:10s, don't know what he has. As we just had a garage
> sale it's all nice and clean in there so I will get him to pull in and I'll
> stick the jack under there and do a count when he comes. So assuming it is
> 4:10 all other swapping from a 95 to an 88 should be straight across.
http://www.----------.com/chrys8dana35covers.jpg The ratio numbers will
not have a decimal point.
God Bless America, ßill O|||||||O
mailto:--------------------
Greg wrote:
>
> I told him to do the one wheel, two spin count, I forgot it was the 4cyl
> that probably had the 4:10s, don't know what he has. As we just had a garage
> sale it's all nice and clean in there so I will get him to pull in and I'll
> stick the jack under there and do a count when he comes. So assuming it is
> 4:10 all other swapping from a 95 to an 88 should be straight across.
11-03-2004, 05:44 PM
#19
Guest
Posts: n/a
Re: Swapping YJ rears?
The 4.10 are only stock in the 4 banger.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his,
same
> as my daughter's, and if so is there any other reason why this wouldn't
just
> be an easy swap over.
>
>
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his,
same
> as my daughter's, and if so is there any other reason why this wouldn't
just
> be an easy swap over.
>
>
11-03-2004, 05:44 PM
#20
Guest
Posts: n/a
Re: Swapping YJ rears?
The 4.10 are only stock in the 4 banger.
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his,
same
> as my daughter's, and if so is there any other reason why this wouldn't
just
> be an easy swap over.
>
>
"Greg" <greglc84@hotmail.com> wrote in message
news:x9Zhd.100688$nl.37977@pd7tw3no...
> We swapped my daughter's 95 YJ Dana 35 for a ford 9" and a guy came by
and
> looked at her 35, said his is shot in his 88 YJ, and he can't afford the
> cost to swap others in, and wants to know if this one will fit, I said I
> thought it would. So am I right that he would have 4:10s stock in his,
same
> as my daughter's, and if so is there any other reason why this wouldn't
just
> be an easy swap over.
>
>