slip yoke eliminator...brand? recommendations? install help?
10-07-2003, 07:25 PM
#51
Guest
Posts: n/a
Re: slip yoke eliminator...brand? recommendations? install help?
In article <GNCgb.31606$xB4.29585@twister.southeast.rr.com> , "Nathan W.
Collier" <JeepChat@7SlotGrille.com> writes:
>theres no real world advantage to having a stronger shaft. the existing
>shaft is more than adequate in its original length, and shortening it only
>makes it stronger. in _all_ my years of tinkering ive _never_ heard of
>anyone ever busting a stock 231 main shaft.
Hmm, there one someone here about a year ago who did just that..can't remember
who, but his mainshaft split right at that narrow section.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
Collier" <JeepChat@7SlotGrille.com> writes:
>theres no real world advantage to having a stronger shaft. the existing
>shaft is more than adequate in its original length, and shortening it only
>makes it stronger. in _all_ my years of tinkering ive _never_ heard of
>anyone ever busting a stock 231 main shaft.
Hmm, there one someone here about a year ago who did just that..can't remember
who, but his mainshaft split right at that narrow section.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
10-07-2003, 07:25 PM
#52
Guest
Posts: n/a
Re: slip yoke eliminator...brand? recommendations? install help?
In article <GNCgb.31606$xB4.29585@twister.southeast.rr.com> , "Nathan W.
Collier" <JeepChat@7SlotGrille.com> writes:
>theres no real world advantage to having a stronger shaft. the existing
>shaft is more than adequate in its original length, and shortening it only
>makes it stronger. in _all_ my years of tinkering ive _never_ heard of
>anyone ever busting a stock 231 main shaft.
Hmm, there one someone here about a year ago who did just that..can't remember
who, but his mainshaft split right at that narrow section.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
Collier" <JeepChat@7SlotGrille.com> writes:
>theres no real world advantage to having a stronger shaft. the existing
>shaft is more than adequate in its original length, and shortening it only
>makes it stronger. in _all_ my years of tinkering ive _never_ heard of
>anyone ever busting a stock 231 main shaft.
Hmm, there one someone here about a year ago who did just that..can't remember
who, but his mainshaft split right at that narrow section.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
10-07-2003, 08:21 PM
#53
Guest
Posts: n/a
Re: slip yoke eliminator...brand? recommendations? install help?
"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
news:20031007192552.21457.00001153@mb-m10.aol.com...
> Hmm, there one someone here about a year ago who did just that..can't
remember
> who, but his mainshaft split right at that narrow section.
improper installations (drilling into the narrow section when the
instructions are clear on that) does not count.
--
Nathan W. Collier
http://7SlotGrille.com
news:20031007192552.21457.00001153@mb-m10.aol.com...
> Hmm, there one someone here about a year ago who did just that..can't
remember
> who, but his mainshaft split right at that narrow section.
improper installations (drilling into the narrow section when the
instructions are clear on that) does not count.
--
Nathan W. Collier
http://7SlotGrille.com
10-07-2003, 08:21 PM
#54
Guest
Posts: n/a
Re: slip yoke eliminator...brand? recommendations? install help?
"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
news:20031007192552.21457.00001153@mb-m10.aol.com...
> Hmm, there one someone here about a year ago who did just that..can't
remember
> who, but his mainshaft split right at that narrow section.
improper installations (drilling into the narrow section when the
instructions are clear on that) does not count.
--
Nathan W. Collier
http://7SlotGrille.com
news:20031007192552.21457.00001153@mb-m10.aol.com...
> Hmm, there one someone here about a year ago who did just that..can't
remember
> who, but his mainshaft split right at that narrow section.
improper installations (drilling into the narrow section when the
instructions are clear on that) does not count.
--
Nathan W. Collier
http://7SlotGrille.com
10-07-2003, 08:21 PM
#55
Guest
Posts: n/a
Re: slip yoke eliminator...brand? recommendations? install help?
"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
news:20031007192552.21457.00001153@mb-m10.aol.com...
> Hmm, there one someone here about a year ago who did just that..can't
remember
> who, but his mainshaft split right at that narrow section.
improper installations (drilling into the narrow section when the
instructions are clear on that) does not count.
--
Nathan W. Collier
http://7SlotGrille.com
news:20031007192552.21457.00001153@mb-m10.aol.com...
> Hmm, there one someone here about a year ago who did just that..can't
remember
> who, but his mainshaft split right at that narrow section.
improper installations (drilling into the narrow section when the
instructions are clear on that) does not count.
--
Nathan W. Collier
http://7SlotGrille.com
10-07-2003, 10:42 PM
#56
Guest
Posts: n/a
Re: slip yoke eliminator...brand? recommendations? install help?
IIRC it was a stock shaft but I may be mistaken. I'll look though my sent
messages and see if I can locate the thread.
In article <5MIgb.32142$r25.27374@twister.southeast.rr.com> , "Nathan W.
Collier" <JeepChat@7SlotGrille.com> writes:
>"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
>news:20031007192552.21457.00001153@mb-m10.aol.com...
>> Hmm, there one someone here about a year ago who did just that..can't
>remember
>> who, but his mainshaft split right at that narrow section.
>
>improper installations (drilling into the narrow section when the
>instructions are clear on that) does not count.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
messages and see if I can locate the thread.
In article <5MIgb.32142$r25.27374@twister.southeast.rr.com> , "Nathan W.
Collier" <JeepChat@7SlotGrille.com> writes:
>"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
>news:20031007192552.21457.00001153@mb-m10.aol.com...
>> Hmm, there one someone here about a year ago who did just that..can't
>remember
>> who, but his mainshaft split right at that narrow section.
>
>improper installations (drilling into the narrow section when the
>instructions are clear on that) does not count.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
10-07-2003, 10:42 PM
#57
Guest
Posts: n/a
Re: slip yoke eliminator...brand? recommendations? install help?
IIRC it was a stock shaft but I may be mistaken. I'll look though my sent
messages and see if I can locate the thread.
In article <5MIgb.32142$r25.27374@twister.southeast.rr.com> , "Nathan W.
Collier" <JeepChat@7SlotGrille.com> writes:
>"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
>news:20031007192552.21457.00001153@mb-m10.aol.com...
>> Hmm, there one someone here about a year ago who did just that..can't
>remember
>> who, but his mainshaft split right at that narrow section.
>
>improper installations (drilling into the narrow section when the
>instructions are clear on that) does not count.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
messages and see if I can locate the thread.
In article <5MIgb.32142$r25.27374@twister.southeast.rr.com> , "Nathan W.
Collier" <JeepChat@7SlotGrille.com> writes:
>"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
>news:20031007192552.21457.00001153@mb-m10.aol.com...
>> Hmm, there one someone here about a year ago who did just that..can't
>remember
>> who, but his mainshaft split right at that narrow section.
>
>improper installations (drilling into the narrow section when the
>instructions are clear on that) does not count.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
10-07-2003, 10:42 PM
#58
Guest
Posts: n/a
Re: slip yoke eliminator...brand? recommendations? install help?
IIRC it was a stock shaft but I may be mistaken. I'll look though my sent
messages and see if I can locate the thread.
In article <5MIgb.32142$r25.27374@twister.southeast.rr.com> , "Nathan W.
Collier" <JeepChat@7SlotGrille.com> writes:
>"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
>news:20031007192552.21457.00001153@mb-m10.aol.com...
>> Hmm, there one someone here about a year ago who did just that..can't
>remember
>> who, but his mainshaft split right at that narrow section.
>
>improper installations (drilling into the narrow section when the
>instructions are clear on that) does not count.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
messages and see if I can locate the thread.
In article <5MIgb.32142$r25.27374@twister.southeast.rr.com> , "Nathan W.
Collier" <JeepChat@7SlotGrille.com> writes:
>"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
>news:20031007192552.21457.00001153@mb-m10.aol.com...
>> Hmm, there one someone here about a year ago who did just that..can't
>remember
>> who, but his mainshaft split right at that narrow section.
>
>improper installations (drilling into the narrow section when the
>instructions are clear on that) does not count.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
10-07-2003, 10:57 PM
#59
Guest
Posts: n/a
Re: slip yoke eliminator...brand? recommendations? install help?
http://www.google.com/groups?hl=en&l...th=8693e48c47c
19d45&seekm=4b764732.0302201342.aac0dfe%40posting. google.com#link1
http://www.google.com/groups?hl=en&l...rnum=1&thl=0,1
127985703,1127726135,1127681833,1127298306,1127285 304,1127211588,112727437
4,1127271000,1127264324,1127210167,1127209609&seek m=3E198FA7.9060602%40net
scape.net#link1
http://www.google.com/groups?hl=en&l...th=884df9b2167
5c728&seekm=20030222030633.11719.00000007%40mb-dd.aol.com#s
In article <20031007224214.15462.00003445@mb-m06.aol.com>,
mlmacchia@aol.comspambgon (Matt Macchiarolo) writes:
>IIRC it was a stock shaft but I may be mistaken. I'll look though my sent
>messages and see if I can locate the thread.
>
>In article <5MIgb.32142$r25.27374@twister.southeast.rr.com> , "Nathan W.
>Collier" <JeepChat@7SlotGrille.com> writes:
>
>>"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
>>news:20031007192552.21457.00001153@mb-m10.aol.com...
>>> Hmm, there one someone here about a year ago who did just that..can't
>>remember
>>> who, but his mainshaft split right at that narrow section.
>>
>>improper installations (drilling into the narrow section when the
>>instructions are clear on that) does not count.
>
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
19d45&seekm=4b764732.0302201342.aac0dfe%40posting. google.com#link1
http://www.google.com/groups?hl=en&l...rnum=1&thl=0,1
127985703,1127726135,1127681833,1127298306,1127285 304,1127211588,112727437
4,1127271000,1127264324,1127210167,1127209609&seek m=3E198FA7.9060602%40net
scape.net#link1
http://www.google.com/groups?hl=en&l...th=884df9b2167
5c728&seekm=20030222030633.11719.00000007%40mb-dd.aol.com#s
In article <20031007224214.15462.00003445@mb-m06.aol.com>,
mlmacchia@aol.comspambgon (Matt Macchiarolo) writes:
>IIRC it was a stock shaft but I may be mistaken. I'll look though my sent
>messages and see if I can locate the thread.
>
>In article <5MIgb.32142$r25.27374@twister.southeast.rr.com> , "Nathan W.
>Collier" <JeepChat@7SlotGrille.com> writes:
>
>>"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
>>news:20031007192552.21457.00001153@mb-m10.aol.com...
>>> Hmm, there one someone here about a year ago who did just that..can't
>>remember
>>> who, but his mainshaft split right at that narrow section.
>>
>>improper installations (drilling into the narrow section when the
>>instructions are clear on that) does not count.
>
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
10-07-2003, 10:57 PM
#60
Guest
Posts: n/a
Re: slip yoke eliminator...brand? recommendations? install help?
http://www.google.com/groups?hl=en&l...th=8693e48c47c
19d45&seekm=4b764732.0302201342.aac0dfe%40posting. google.com#link1
http://www.google.com/groups?hl=en&l...rnum=1&thl=0,1
127985703,1127726135,1127681833,1127298306,1127285 304,1127211588,112727437
4,1127271000,1127264324,1127210167,1127209609&seek m=3E198FA7.9060602%40net
scape.net#link1
http://www.google.com/groups?hl=en&l...th=884df9b2167
5c728&seekm=20030222030633.11719.00000007%40mb-dd.aol.com#s
In article <20031007224214.15462.00003445@mb-m06.aol.com>,
mlmacchia@aol.comspambgon (Matt Macchiarolo) writes:
>IIRC it was a stock shaft but I may be mistaken. I'll look though my sent
>messages and see if I can locate the thread.
>
>In article <5MIgb.32142$r25.27374@twister.southeast.rr.com> , "Nathan W.
>Collier" <JeepChat@7SlotGrille.com> writes:
>
>>"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
>>news:20031007192552.21457.00001153@mb-m10.aol.com...
>>> Hmm, there one someone here about a year ago who did just that..can't
>>remember
>>> who, but his mainshaft split right at that narrow section.
>>
>>improper installations (drilling into the narrow section when the
>>instructions are clear on that) does not count.
>
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
19d45&seekm=4b764732.0302201342.aac0dfe%40posting. google.com#link1
http://www.google.com/groups?hl=en&l...rnum=1&thl=0,1
127985703,1127726135,1127681833,1127298306,1127285 304,1127211588,112727437
4,1127271000,1127264324,1127210167,1127209609&seek m=3E198FA7.9060602%40net
scape.net#link1
http://www.google.com/groups?hl=en&l...th=884df9b2167
5c728&seekm=20030222030633.11719.00000007%40mb-dd.aol.com#s
In article <20031007224214.15462.00003445@mb-m06.aol.com>,
mlmacchia@aol.comspambgon (Matt Macchiarolo) writes:
>IIRC it was a stock shaft but I may be mistaken. I'll look though my sent
>messages and see if I can locate the thread.
>
>In article <5MIgb.32142$r25.27374@twister.southeast.rr.com> , "Nathan W.
>Collier" <JeepChat@7SlotGrille.com> writes:
>
>>"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
>>news:20031007192552.21457.00001153@mb-m10.aol.com...
>>> Hmm, there one someone here about a year ago who did just that..can't
>>remember
>>> who, but his mainshaft split right at that narrow section.
>>
>>improper installations (drilling into the narrow section when the
>>instructions are clear on that) does not count.
>
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html