The other thing that could be happening is the bowl float hanging up and not
properly closing.

--
Coasty

Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962

 

The other thing that could be happening is the bowl float hanging up and not
properly closing.

--
Coasty

Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962

 

The other thing that could be happening is the bowl float hanging up and not
properly closing.

--
Coasty

Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962

 

Hi *****,
The one throat limits you:
http://www.----------.com/temp/tornadoOHCengine4.jpg Usually the repair
kit with the new needle valve that are not eaten by the methanol mix
we're force to use will fix it, just follow the instructions:
http://www.apple.queensu.ca/CJ3B/Tech/Carter.html
http://www.apple.queensu.ca/CJ3B/Tech/Carburetor.html
God Bless America, ßill O|||||||O
mailto:--------------------

***** Schneider wrote:
>
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962

 

Hi *****,
The one throat limits you:
http://www.----------.com/temp/tornadoOHCengine4.jpg Usually the repair
kit with the new needle valve that are not eaten by the methanol mix
we're force to use will fix it, just follow the instructions:
http://www.apple.queensu.ca/CJ3B/Tech/Carter.html
http://www.apple.queensu.ca/CJ3B/Tech/Carburetor.html
God Bless America, ßill O|||||||O
mailto:--------------------

***** Schneider wrote:
>
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962

 

Hi *****,
The one throat limits you:
http://www.----------.com/temp/tornadoOHCengine4.jpg Usually the repair
kit with the new needle valve that are not eaten by the methanol mix
we're force to use will fix it, just follow the instructions:
http://www.apple.queensu.ca/CJ3B/Tech/Carter.html
http://www.apple.queensu.ca/CJ3B/Tech/Carburetor.html
God Bless America, ßill O|||||||O
mailto:--------------------

***** Schneider wrote:
>
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962

 

Hi *****,
The one throat limits you:
http://www.----------.com/temp/tornadoOHCengine4.jpg Usually the repair
kit with the new needle valve that are not eaten by the methanol mix
we're force to use will fix it, just follow the instructions:
http://www.apple.queensu.ca/CJ3B/Tech/Carter.html
http://www.apple.queensu.ca/CJ3B/Tech/Carburetor.html
God Bless America, ßill O|||||||O
mailto:--------------------

***** Schneider wrote:
>
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962