Replacement carb for 23ci OHC Willys
07-26-2005, 06:53 PM
#1
Guest
Posts: n/a
Replacement carb for 23ci OHC ******
Having problems with the original (I think) Holley model 1920 2bbl
carburetor on my '62 ****** pickup. Mixture too rich and fouling the
plugs. Have adjusted towards lean as far as possible and even had a
mechanic look at and rebuild using the appropriate kit (I hope - the
kid was very young). Changed plugs for hotter spark also.
My question: does anyone know of an appropriate carburetor that can
be used with this engine (230ci OHC Tornado) that can just be swapped
with the '1920' with little or no worries down the road?
Any direction you can send me in this search is appreciated...
ThanQ
*****
"Just because Chrysler calls it a Jeep, don't make it so...!"
- ***** Schneider / 1962
carburetor on my '62 ****** pickup. Mixture too rich and fouling the
plugs. Have adjusted towards lean as far as possible and even had a
mechanic look at and rebuild using the appropriate kit (I hope - the
kid was very young). Changed plugs for hotter spark also.
My question: does anyone know of an appropriate carburetor that can
be used with this engine (230ci OHC Tornado) that can just be swapped
with the '1920' with little or no worries down the road?
Any direction you can send me in this search is appreciated...
ThanQ
*****
"Just because Chrysler calls it a Jeep, don't make it so...!"
- ***** Schneider / 1962
07-26-2005, 07:12 PM
#2
Guest
Posts: n/a
Re: Replacement carb for 23ci OHC ******
If you can locate some jets re-jet the carb. More than likely the jets are
too big most of the time re-jetting fixes the problem.
http://www.mergetel.com/~fraso/RasoE...arburetion.htm
--
Coasty
Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
too big most of the time re-jetting fixes the problem.
http://www.mergetel.com/~fraso/RasoE...arburetion.htm
--
Coasty
Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
07-26-2005, 07:12 PM
#3
Guest
Posts: n/a
Re: Replacement carb for 23ci OHC ******
If you can locate some jets re-jet the carb. More than likely the jets are
too big most of the time re-jetting fixes the problem.
http://www.mergetel.com/~fraso/RasoE...arburetion.htm
--
Coasty
Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
too big most of the time re-jetting fixes the problem.
http://www.mergetel.com/~fraso/RasoE...arburetion.htm
--
Coasty
Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
07-26-2005, 07:12 PM
#4
Guest
Posts: n/a
Re: Replacement carb for 23ci OHC ******
If you can locate some jets re-jet the carb. More than likely the jets are
too big most of the time re-jetting fixes the problem.
http://www.mergetel.com/~fraso/RasoE...arburetion.htm
--
Coasty
Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
too big most of the time re-jetting fixes the problem.
http://www.mergetel.com/~fraso/RasoE...arburetion.htm
--
Coasty
Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
07-26-2005, 07:12 PM
#5
Guest
Posts: n/a
Re: Replacement carb for 23ci OHC ******
If you can locate some jets re-jet the carb. More than likely the jets are
too big most of the time re-jetting fixes the problem.
http://www.mergetel.com/~fraso/RasoE...arburetion.htm
--
Coasty
Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
too big most of the time re-jetting fixes the problem.
http://www.mergetel.com/~fraso/RasoE...arburetion.htm
--
Coasty
Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
07-26-2005, 07:17 PM
#6
Guest
Posts: n/a
Replacement carb for 230ci OHC ****** Tornado engine (Revised)
On Tue, 26 Jul 2005 15:53:06 -0700, ***** Schneider
<WillySchneider(remove_to_reply)@hotmail.com> wrote:
>Having problems with the original (I think) Holley model 1920 2bbl
>carburetor on my '62 ****** pickup. Mixture too rich and fouling the
>plugs. Have adjusted towards lean as far as possible and even had a
>mechanic look at and rebuild using the appropriate kit (I hope - the
>kid was very young). Changed plugs for hotter spark also.
>
>My question: does anyone know of an appropriate carburetor that can
>be used with this engine (230ci OHC Tornado) that can just be swapped
>with the '1920' with little or no worries down the road?
>
>Any direction you can send me in this search is appreciated...
>
>ThanQ
>*****
>"Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
"Just because Chrysler calls it a Jeep, don't make it so...!"
- ***** Schneider / 1962
<WillySchneider(remove_to_reply)@hotmail.com> wrote:
>Having problems with the original (I think) Holley model 1920 2bbl
>carburetor on my '62 ****** pickup. Mixture too rich and fouling the
>plugs. Have adjusted towards lean as far as possible and even had a
>mechanic look at and rebuild using the appropriate kit (I hope - the
>kid was very young). Changed plugs for hotter spark also.
>
>My question: does anyone know of an appropriate carburetor that can
>be used with this engine (230ci OHC Tornado) that can just be swapped
>with the '1920' with little or no worries down the road?
>
>Any direction you can send me in this search is appreciated...
>
>ThanQ
>*****
>"Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
"Just because Chrysler calls it a Jeep, don't make it so...!"
- ***** Schneider / 1962
07-26-2005, 07:17 PM
#7
Guest
Posts: n/a
Replacement carb for 230ci OHC ****** Tornado engine (Revised)
On Tue, 26 Jul 2005 15:53:06 -0700, ***** Schneider
<WillySchneider(remove_to_reply)@hotmail.com> wrote:
>Having problems with the original (I think) Holley model 1920 2bbl
>carburetor on my '62 ****** pickup. Mixture too rich and fouling the
>plugs. Have adjusted towards lean as far as possible and even had a
>mechanic look at and rebuild using the appropriate kit (I hope - the
>kid was very young). Changed plugs for hotter spark also.
>
>My question: does anyone know of an appropriate carburetor that can
>be used with this engine (230ci OHC Tornado) that can just be swapped
>with the '1920' with little or no worries down the road?
>
>Any direction you can send me in this search is appreciated...
>
>ThanQ
>*****
>"Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
"Just because Chrysler calls it a Jeep, don't make it so...!"
- ***** Schneider / 1962
<WillySchneider(remove_to_reply)@hotmail.com> wrote:
>Having problems with the original (I think) Holley model 1920 2bbl
>carburetor on my '62 ****** pickup. Mixture too rich and fouling the
>plugs. Have adjusted towards lean as far as possible and even had a
>mechanic look at and rebuild using the appropriate kit (I hope - the
>kid was very young). Changed plugs for hotter spark also.
>
>My question: does anyone know of an appropriate carburetor that can
>be used with this engine (230ci OHC Tornado) that can just be swapped
>with the '1920' with little or no worries down the road?
>
>Any direction you can send me in this search is appreciated...
>
>ThanQ
>*****
>"Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
"Just because Chrysler calls it a Jeep, don't make it so...!"
- ***** Schneider / 1962
07-26-2005, 07:17 PM
#8
Guest
Posts: n/a
Replacement carb for 230ci OHC ****** Tornado engine (Revised)
On Tue, 26 Jul 2005 15:53:06 -0700, ***** Schneider
<WillySchneider(remove_to_reply)@hotmail.com> wrote:
>Having problems with the original (I think) Holley model 1920 2bbl
>carburetor on my '62 ****** pickup. Mixture too rich and fouling the
>plugs. Have adjusted towards lean as far as possible and even had a
>mechanic look at and rebuild using the appropriate kit (I hope - the
>kid was very young). Changed plugs for hotter spark also.
>
>My question: does anyone know of an appropriate carburetor that can
>be used with this engine (230ci OHC Tornado) that can just be swapped
>with the '1920' with little or no worries down the road?
>
>Any direction you can send me in this search is appreciated...
>
>ThanQ
>*****
>"Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
"Just because Chrysler calls it a Jeep, don't make it so...!"
- ***** Schneider / 1962
<WillySchneider(remove_to_reply)@hotmail.com> wrote:
>Having problems with the original (I think) Holley model 1920 2bbl
>carburetor on my '62 ****** pickup. Mixture too rich and fouling the
>plugs. Have adjusted towards lean as far as possible and even had a
>mechanic look at and rebuild using the appropriate kit (I hope - the
>kid was very young). Changed plugs for hotter spark also.
>
>My question: does anyone know of an appropriate carburetor that can
>be used with this engine (230ci OHC Tornado) that can just be swapped
>with the '1920' with little or no worries down the road?
>
>Any direction you can send me in this search is appreciated...
>
>ThanQ
>*****
>"Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
"Just because Chrysler calls it a Jeep, don't make it so...!"
- ***** Schneider / 1962
07-26-2005, 07:17 PM
#9
Guest
Posts: n/a
Replacement carb for 230ci OHC ****** Tornado engine (Revised)
On Tue, 26 Jul 2005 15:53:06 -0700, ***** Schneider
<WillySchneider(remove_to_reply)@hotmail.com> wrote:
>Having problems with the original (I think) Holley model 1920 2bbl
>carburetor on my '62 ****** pickup. Mixture too rich and fouling the
>plugs. Have adjusted towards lean as far as possible and even had a
>mechanic look at and rebuild using the appropriate kit (I hope - the
>kid was very young). Changed plugs for hotter spark also.
>
>My question: does anyone know of an appropriate carburetor that can
>be used with this engine (230ci OHC Tornado) that can just be swapped
>with the '1920' with little or no worries down the road?
>
>Any direction you can send me in this search is appreciated...
>
>ThanQ
>*****
>"Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
"Just because Chrysler calls it a Jeep, don't make it so...!"
- ***** Schneider / 1962
<WillySchneider(remove_to_reply)@hotmail.com> wrote:
>Having problems with the original (I think) Holley model 1920 2bbl
>carburetor on my '62 ****** pickup. Mixture too rich and fouling the
>plugs. Have adjusted towards lean as far as possible and even had a
>mechanic look at and rebuild using the appropriate kit (I hope - the
>kid was very young). Changed plugs for hotter spark also.
>
>My question: does anyone know of an appropriate carburetor that can
>be used with this engine (230ci OHC Tornado) that can just be swapped
>with the '1920' with little or no worries down the road?
>
>Any direction you can send me in this search is appreciated...
>
>ThanQ
>*****
>"Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
"Just because Chrysler calls it a Jeep, don't make it so...!"
- ***** Schneider / 1962
07-26-2005, 07:18 PM
#10
Guest
Posts: n/a
Re: Replacement carb for 23ci OHC ******
The other thing that could be happening is the bowl float hanging up and not
properly closing.
--
Coasty
Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962
properly closing.
--
Coasty
Remove the SPOOGE to reply
"***** Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in
message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com...
> Having problems with the original (I think) Holley model 1920 2bbl
> carburetor on my '62 ****** pickup. Mixture too rich and fouling the
> plugs. Have adjusted towards lean as far as possible and even had a
> mechanic look at and rebuild using the appropriate kit (I hope - the
> kid was very young). Changed plugs for hotter spark also.
>
> My question: does anyone know of an appropriate carburetor that can
> be used with this engine (230ci OHC Tornado) that can just be swapped
> with the '1920' with little or no worries down the road?
>
> Any direction you can send me in this search is appreciated...
>
> ThanQ
> *****
> "Just because Chrysler calls it a Jeep, don't make it so...!"
> - ***** Schneider / 1962