Replacement carb for 23ci OHC Willys
Having problems with the original (I think) Holley model 1920 2bbl
carburetor on my '62 Willys pickup. Mixture too rich and fouling the plugs. Have adjusted towards lean as far as possible and even had a mechanic look at and rebuild using the appropriate kit (I hope - the kid was very young). Changed plugs for hotter spark also. My question: does anyone know of an appropriate carburetor that can be used with this engine (230ci OHC Tornado) that can just be swapped with the '1920' with little or no worries down the road? Any direction you can send me in this search is appreciated... ThanQ Willy "Just because Chrysler calls it a Jeep, don't make it so...!" - Willy Schneider / 1962 |
Re: Replacement carb for 23ci OHC Willys
If you can locate some jets re-jet the carb. More than likely the jets are
too big most of the time re-jetting fixes the problem. http://www.mergetel.com/~fraso/RasoE...arburetion.htm -- Coasty Remove the SPOOGE to reply "Willy Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com... > Having problems with the original (I think) Holley model 1920 2bbl > carburetor on my '62 Willys pickup. Mixture too rich and fouling the > plugs. Have adjusted towards lean as far as possible and even had a > mechanic look at and rebuild using the appropriate kit (I hope - the > kid was very young). Changed plugs for hotter spark also. > > My question: does anyone know of an appropriate carburetor that can > be used with this engine (230ci OHC Tornado) that can just be swapped > with the '1920' with little or no worries down the road? > > Any direction you can send me in this search is appreciated... > > ThanQ > Willy > "Just because Chrysler calls it a Jeep, don't make it so...!" > - Willy Schneider / 1962 |
Re: Replacement carb for 23ci OHC Willys
If you can locate some jets re-jet the carb. More than likely the jets are
too big most of the time re-jetting fixes the problem. http://www.mergetel.com/~fraso/RasoE...arburetion.htm -- Coasty Remove the SPOOGE to reply "Willy Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com... > Having problems with the original (I think) Holley model 1920 2bbl > carburetor on my '62 Willys pickup. Mixture too rich and fouling the > plugs. Have adjusted towards lean as far as possible and even had a > mechanic look at and rebuild using the appropriate kit (I hope - the > kid was very young). Changed plugs for hotter spark also. > > My question: does anyone know of an appropriate carburetor that can > be used with this engine (230ci OHC Tornado) that can just be swapped > with the '1920' with little or no worries down the road? > > Any direction you can send me in this search is appreciated... > > ThanQ > Willy > "Just because Chrysler calls it a Jeep, don't make it so...!" > - Willy Schneider / 1962 |
Re: Replacement carb for 23ci OHC Willys
If you can locate some jets re-jet the carb. More than likely the jets are
too big most of the time re-jetting fixes the problem. http://www.mergetel.com/~fraso/RasoE...arburetion.htm -- Coasty Remove the SPOOGE to reply "Willy Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com... > Having problems with the original (I think) Holley model 1920 2bbl > carburetor on my '62 Willys pickup. Mixture too rich and fouling the > plugs. Have adjusted towards lean as far as possible and even had a > mechanic look at and rebuild using the appropriate kit (I hope - the > kid was very young). Changed plugs for hotter spark also. > > My question: does anyone know of an appropriate carburetor that can > be used with this engine (230ci OHC Tornado) that can just be swapped > with the '1920' with little or no worries down the road? > > Any direction you can send me in this search is appreciated... > > ThanQ > Willy > "Just because Chrysler calls it a Jeep, don't make it so...!" > - Willy Schneider / 1962 |
Re: Replacement carb for 23ci OHC Willys
If you can locate some jets re-jet the carb. More than likely the jets are
too big most of the time re-jetting fixes the problem. http://www.mergetel.com/~fraso/RasoE...arburetion.htm -- Coasty Remove the SPOOGE to reply "Willy Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com... > Having problems with the original (I think) Holley model 1920 2bbl > carburetor on my '62 Willys pickup. Mixture too rich and fouling the > plugs. Have adjusted towards lean as far as possible and even had a > mechanic look at and rebuild using the appropriate kit (I hope - the > kid was very young). Changed plugs for hotter spark also. > > My question: does anyone know of an appropriate carburetor that can > be used with this engine (230ci OHC Tornado) that can just be swapped > with the '1920' with little or no worries down the road? > > Any direction you can send me in this search is appreciated... > > ThanQ > Willy > "Just because Chrysler calls it a Jeep, don't make it so...!" > - Willy Schneider / 1962 |
Replacement carb for 230ci OHC Willys Tornado engine (Revised)
On Tue, 26 Jul 2005 15:53:06 -0700, Willy Schneider
<WillySchneider(remove_to_reply)@hotmail.com> wrote: >Having problems with the original (I think) Holley model 1920 2bbl >carburetor on my '62 Willys pickup. Mixture too rich and fouling the >plugs. Have adjusted towards lean as far as possible and even had a >mechanic look at and rebuild using the appropriate kit (I hope - the >kid was very young). Changed plugs for hotter spark also. > >My question: does anyone know of an appropriate carburetor that can >be used with this engine (230ci OHC Tornado) that can just be swapped >with the '1920' with little or no worries down the road? > >Any direction you can send me in this search is appreciated... > >ThanQ >Willy >"Just because Chrysler calls it a Jeep, don't make it so...!" > - Willy Schneider / 1962 "Just because Chrysler calls it a Jeep, don't make it so...!" - Willy Schneider / 1962 |
Replacement carb for 230ci OHC Willys Tornado engine (Revised)
On Tue, 26 Jul 2005 15:53:06 -0700, Willy Schneider
<WillySchneider(remove_to_reply)@hotmail.com> wrote: >Having problems with the original (I think) Holley model 1920 2bbl >carburetor on my '62 Willys pickup. Mixture too rich and fouling the >plugs. Have adjusted towards lean as far as possible and even had a >mechanic look at and rebuild using the appropriate kit (I hope - the >kid was very young). Changed plugs for hotter spark also. > >My question: does anyone know of an appropriate carburetor that can >be used with this engine (230ci OHC Tornado) that can just be swapped >with the '1920' with little or no worries down the road? > >Any direction you can send me in this search is appreciated... > >ThanQ >Willy >"Just because Chrysler calls it a Jeep, don't make it so...!" > - Willy Schneider / 1962 "Just because Chrysler calls it a Jeep, don't make it so...!" - Willy Schneider / 1962 |
Replacement carb for 230ci OHC Willys Tornado engine (Revised)
On Tue, 26 Jul 2005 15:53:06 -0700, Willy Schneider
<WillySchneider(remove_to_reply)@hotmail.com> wrote: >Having problems with the original (I think) Holley model 1920 2bbl >carburetor on my '62 Willys pickup. Mixture too rich and fouling the >plugs. Have adjusted towards lean as far as possible and even had a >mechanic look at and rebuild using the appropriate kit (I hope - the >kid was very young). Changed plugs for hotter spark also. > >My question: does anyone know of an appropriate carburetor that can >be used with this engine (230ci OHC Tornado) that can just be swapped >with the '1920' with little or no worries down the road? > >Any direction you can send me in this search is appreciated... > >ThanQ >Willy >"Just because Chrysler calls it a Jeep, don't make it so...!" > - Willy Schneider / 1962 "Just because Chrysler calls it a Jeep, don't make it so...!" - Willy Schneider / 1962 |
Replacement carb for 230ci OHC Willys Tornado engine (Revised)
On Tue, 26 Jul 2005 15:53:06 -0700, Willy Schneider
<WillySchneider(remove_to_reply)@hotmail.com> wrote: >Having problems with the original (I think) Holley model 1920 2bbl >carburetor on my '62 Willys pickup. Mixture too rich and fouling the >plugs. Have adjusted towards lean as far as possible and even had a >mechanic look at and rebuild using the appropriate kit (I hope - the >kid was very young). Changed plugs for hotter spark also. > >My question: does anyone know of an appropriate carburetor that can >be used with this engine (230ci OHC Tornado) that can just be swapped >with the '1920' with little or no worries down the road? > >Any direction you can send me in this search is appreciated... > >ThanQ >Willy >"Just because Chrysler calls it a Jeep, don't make it so...!" > - Willy Schneider / 1962 "Just because Chrysler calls it a Jeep, don't make it so...!" - Willy Schneider / 1962 |
Re: Replacement carb for 23ci OHC Willys
The other thing that could be happening is the bowl float hanging up and not
properly closing. -- Coasty Remove the SPOOGE to reply "Willy Schneider" <WillySchneider(remove_to_reply)@hotmail.com> wrote in message news:audde15m6vojpble4v50i0ha9990fdf3oq@4ax.com... > Having problems with the original (I think) Holley model 1920 2bbl > carburetor on my '62 Willys pickup. Mixture too rich and fouling the > plugs. Have adjusted towards lean as far as possible and even had a > mechanic look at and rebuild using the appropriate kit (I hope - the > kid was very young). Changed plugs for hotter spark also. > > My question: does anyone know of an appropriate carburetor that can > be used with this engine (230ci OHC Tornado) that can just be swapped > with the '1920' with little or no worries down the road? > > Any direction you can send me in this search is appreciated... > > ThanQ > Willy > "Just because Chrysler calls it a Jeep, don't make it so...!" > - Willy Schneider / 1962 |
All times are GMT -4. The time now is 01:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands