Dan

It is possable to repack and reassamble them (I have done it, about
3000Km ago) If the bearings in the are shot, it is very difficult ot
find replacements that fit.

-Dan

L.W.(ßill) ------ III wrote:
> Hi Dustin,
> They're too puny to repack: http://www.----------.com/Dana30hub.jpg
> R/R: http://www.off-road.com/jeep/cheroke...2_feb/bearing/
> Convert to Real Jeep type hubs:
> http://www.4x4wire.com/jeep/tech/axle/yjwarnaxle/ Warn:
> http://www.warn.com/truck/axles/axles_all.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dustin Grimes wrote:
>
>>What kind of equipment is needed to rebuild the Sealed Wheel
>>hub/Bearing assemblies for a 1995 Jeep Cherokee Sport(I believe the
>>bearings are also used in a number of other model years and the Grand
>>Cherokee models)?
>>
>>The local part dealer said that there isn't a core return for the
>>hub/bearing assemblies once they need replacing. At over $160 per
>>unit new, however, I find it hard to believe that there isn't someone
>>out there rebuilding them.
>>
>>Thanks!

dave AKA vwdoc1

I had found the bearings and seals online, but the total cost was around $50
or so to do one hub. So if you can buy a 1992 XJ hub assembly NEW for $90,
I think that is the way to go! Of course you may need a matching rotor if
you are updating an earlier XJ.

JMHO
later,
dave AKA vwdoc1

"Dan" <dan@guy.com> wrote in message
news:RS9Vc.153564$J06.138510@pd7tw2no...
> It is possable to repack and reassamble them (I have done it, about
> 3000Km ago) If the bearings in the are shot, it is very difficult ot
> find replacements that fit.
>
> -Dan
>

dave AKA vwdoc1

I had found the bearings and seals online, but the total cost was around $50
or so to do one hub. So if you can buy a 1992 XJ hub assembly NEW for $90,
I think that is the way to go! Of course you may need a matching rotor if
you are updating an earlier XJ.

JMHO
later,
dave AKA vwdoc1

"Dan" <dan@guy.com> wrote in message
news:RS9Vc.153564$J06.138510@pd7tw2no...
> It is possable to repack and reassamble them (I have done it, about
> 3000Km ago) If the bearings in the are shot, it is very difficult ot
> find replacements that fit.
>
> -Dan
>

dave AKA vwdoc1

I had found the bearings and seals online, but the total cost was around $50
or so to do one hub. So if you can buy a 1992 XJ hub assembly NEW for $90,
I think that is the way to go! Of course you may need a matching rotor if
you are updating an earlier XJ.

JMHO
later,
dave AKA vwdoc1

"Dan" <dan@guy.com> wrote in message
news:RS9Vc.153564$J06.138510@pd7tw2no...
> It is possable to repack and reassamble them (I have done it, about
> 3000Km ago) If the bearings in the are shot, it is very difficult ot
> find replacements that fit.
>
> -Dan
>

dave AKA vwdoc1

I had found the bearings and seals online, but the total cost was around $50
or so to do one hub. So if you can buy a 1992 XJ hub assembly NEW for $90,
I think that is the way to go! Of course you may need a matching rotor if
you are updating an earlier XJ.

JMHO
later,
dave AKA vwdoc1

"Dan" <dan@guy.com> wrote in message
news:RS9Vc.153564$J06.138510@pd7tw2no...
> It is possable to repack and reassamble them (I have done it, about
> 3000Km ago) If the bearings in the are shot, it is very difficult ot
> find replacements that fit.
>
> -Dan
>