removing spindle...dana 30 on an 85 cj7
Guest
Posts: n/a
Re: removing spindle...dana 30 on an 85 cj7
I guess my spindles come off too easily. It would never occur to me that a
slide hammer would get this stuff apart.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4071BF57.4B1FAD83@sympatico.ca...
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
>
> CRWLR wrote:
> >
> > That is probably true as you guys say, but the CJ comes apart entirely
> > differently and this method can't even be used.
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4071B5D9.CA1DC9F9@***.net...
> > > Ditto.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > You will destroy the wheel bearings doing it that way.
> > > >
> > > > You have to be hammering directly on them to get the inside spindle
to
> > > > move. Not something I would recommend unless the bearings and
> > > > races/seats are being replaced.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
slide hammer would get this stuff apart.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4071BF57.4B1FAD83@sympatico.ca...
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
>
> CRWLR wrote:
> >
> > That is probably true as you guys say, but the CJ comes apart entirely
> > differently and this method can't even be used.
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4071B5D9.CA1DC9F9@***.net...
> > > Ditto.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > You will destroy the wheel bearings doing it that way.
> > > >
> > > > You have to be hammering directly on them to get the inside spindle
to
> > > > move. Not something I would recommend unless the bearings and
> > > > races/seats are being replaced.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
Guest
Posts: n/a
Re: removing spindle...dana 30 on an 85 cj7
I guess my spindles come off too easily. It would never occur to me that a
slide hammer would get this stuff apart.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4071BF57.4B1FAD83@sympatico.ca...
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
>
> CRWLR wrote:
> >
> > That is probably true as you guys say, but the CJ comes apart entirely
> > differently and this method can't even be used.
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4071B5D9.CA1DC9F9@***.net...
> > > Ditto.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > You will destroy the wheel bearings doing it that way.
> > > >
> > > > You have to be hammering directly on them to get the inside spindle
to
> > > > move. Not something I would recommend unless the bearings and
> > > > races/seats are being replaced.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
slide hammer would get this stuff apart.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4071BF57.4B1FAD83@sympatico.ca...
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
>
> CRWLR wrote:
> >
> > That is probably true as you guys say, but the CJ comes apart entirely
> > differently and this method can't even be used.
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4071B5D9.CA1DC9F9@***.net...
> > > Ditto.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > You will destroy the wheel bearings doing it that way.
> > > >
> > > > You have to be hammering directly on them to get the inside spindle
to
> > > > move. Not something I would recommend unless the bearings and
> > > > races/seats are being replaced.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
Guest
Posts: n/a
Re: removing spindle...dana 30 on an 85 cj7
I guess my spindles come off too easily. It would never occur to me that a
slide hammer would get this stuff apart.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4071BF57.4B1FAD83@sympatico.ca...
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
>
> CRWLR wrote:
> >
> > That is probably true as you guys say, but the CJ comes apart entirely
> > differently and this method can't even be used.
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4071B5D9.CA1DC9F9@***.net...
> > > Ditto.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > You will destroy the wheel bearings doing it that way.
> > > >
> > > > You have to be hammering directly on them to get the inside spindle
to
> > > > move. Not something I would recommend unless the bearings and
> > > > races/seats are being replaced.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
slide hammer would get this stuff apart.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4071BF57.4B1FAD83@sympatico.ca...
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
>
> CRWLR wrote:
> >
> > That is probably true as you guys say, but the CJ comes apart entirely
> > differently and this method can't even be used.
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4071B5D9.CA1DC9F9@***.net...
> > > Ditto.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > You will destroy the wheel bearings doing it that way.
> > > >
> > > > You have to be hammering directly on them to get the inside spindle
to
> > > > move. Not something I would recommend unless the bearings and
> > > > races/seats are being replaced.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
Guest
Posts: n/a
Re: removing spindle...dana 30 on an 85 cj7
Early Jeeps have Real knuckles:
http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
Guest
Posts: n/a
Re: removing spindle...dana 30 on an 85 cj7
Early Jeeps have Real knuckles:
http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
Guest
Posts: n/a
Re: removing spindle...dana 30 on an 85 cj7
Early Jeeps have Real knuckles:
http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
Guest
Posts: n/a
Re: removing spindle...dana 30 on an 85 cj7
Early Jeeps have Real knuckles:
http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure it can. Just leave the axle in like he did. The axle bolt holds
> the bearings in the same way.
>
> It puts as much stress on a YJ hub as a CJ one doing it that way.
>
> Mike
Guest
Posts: n/a
Re: removing spindle...dana 30 on an 85 cj7
So did early Gelandewagens, (and Land Rovers), and what a pain they were as
well... no seal could keep the dirt out for long ...
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4071E434.623833C2@***.net...
> Early Jeeps have Real knuckles:
> http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure it can. Just leave the axle in like he did. The axle bolt holds
> > the bearings in the same way.
> >
> > It puts as much stress on a YJ hub as a CJ one doing it that way.
> >
> > Mike
well... no seal could keep the dirt out for long ...
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4071E434.623833C2@***.net...
> Early Jeeps have Real knuckles:
> http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure it can. Just leave the axle in like he did. The axle bolt holds
> > the bearings in the same way.
> >
> > It puts as much stress on a YJ hub as a CJ one doing it that way.
> >
> > Mike
Guest
Posts: n/a
Re: removing spindle...dana 30 on an 85 cj7
So did early Gelandewagens, (and Land Rovers), and what a pain they were as
well... no seal could keep the dirt out for long ...
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4071E434.623833C2@***.net...
> Early Jeeps have Real knuckles:
> http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure it can. Just leave the axle in like he did. The axle bolt holds
> > the bearings in the same way.
> >
> > It puts as much stress on a YJ hub as a CJ one doing it that way.
> >
> > Mike
well... no seal could keep the dirt out for long ...
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4071E434.623833C2@***.net...
> Early Jeeps have Real knuckles:
> http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure it can. Just leave the axle in like he did. The axle bolt holds
> > the bearings in the same way.
> >
> > It puts as much stress on a YJ hub as a CJ one doing it that way.
> >
> > Mike
Guest
Posts: n/a
Re: removing spindle...dana 30 on an 85 cj7
So did early Gelandewagens, (and Land Rovers), and what a pain they were as
well... no seal could keep the dirt out for long ...
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4071E434.623833C2@***.net...
> Early Jeeps have Real knuckles:
> http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure it can. Just leave the axle in like he did. The axle bolt holds
> > the bearings in the same way.
> >
> > It puts as much stress on a YJ hub as a CJ one doing it that way.
> >
> > Mike
well... no seal could keep the dirt out for long ...
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4071E434.623833C2@***.net...
> Early Jeeps have Real knuckles:
> http://www.earlycj5.com/Tech/diskSwap/images/image7.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure it can. Just leave the axle in like he did. The axle bolt holds
> > the bearings in the same way.
> >
> > It puts as much stress on a YJ hub as a CJ one doing it that way.
> >
> > Mike
