Re: Front axle vent elbow
#1
Guest
Posts: n/a
Re: Front axle vent elbow
I used JB Weld which is an epoxy on mine. I cleaned the area and put
the stuff on the tube before pressing it in.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Lee Ayrton wrote:
>
> Anyone have a good repair trick for the pressed-in vent hose elbow? I've
> managed to get mine back in, but it clearly isn't going to stay. Epoxy
> around it?
the stuff on the tube before pressing it in.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Lee Ayrton wrote:
>
> Anyone have a good repair trick for the pressed-in vent hose elbow? I've
> managed to get mine back in, but it clearly isn't going to stay. Epoxy
> around it?
#2
Guest
Posts: n/a
Re: Front axle vent elbow
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F61EAB3.9666D6C2@sympatico.ca...
> I used JB Weld which is an epoxy on mine. I cleaned the area and put
> the stuff on the tube before pressing it in.
>
What Mike said.
#3
Guest
Posts: n/a
Re: Front axle vent elbow
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F61EAB3.9666D6C2@sympatico.ca...
> I used JB Weld which is an epoxy on mine. I cleaned the area and put
> the stuff on the tube before pressing it in.
>
What Mike said.
Thread
Thread Starter
Forum
Replies
Last Post
jeepney driver via CarKB.com
Jeep Mailing List
23
02-11-2006 06:13 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)