Re: Front axle vent elbow
 

I used JB Weld which is an epoxy on mine. I cleaned the area and put
the stuff on the tube before pressing it in.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Lee Ayrton wrote:
>
> Anyone have a good repair trick for the pressed-in vent hose elbow? I've
> managed to get mine back in, but it clearly isn't going to stay. Epoxy
> around it?

Re: Front axle vent elbow
 

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F61EAB3.9666D6C2@sympatico.ca...
> I used JB Weld which is an epoxy on mine. I cleaned the area and put
> the stuff on the tube before pressing it in.
>

What Mike said.

Re: Front axle vent elbow
 

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F61EAB3.9666D6C2@sympatico.ca...
> I used JB Weld which is an epoxy on mine. I cleaned the area and put
> the stuff on the tube before pressing it in.
>

What Mike said.