That's much better.

L8r - Jersey


"SB" <chicbearsmook@hotmail.com> wrote in message
news:8MSnc.22472$pp.18686@news04.bloor.is.net.cabl e.rogers.com...
> UH YAH....I was showing the salesman how to drive 4x4 over his front rock
> garden and rolled the jeep and put a small knick in the edge of the door
> NEAR his parking lot....howz that?! ;)
>
>
> "Jersey" <IamHellbound@nospam.comcast.net> wrote in message
> news:Jb6dnV8NX7P2-QLdRVn-uw@comcast.com...
> >
> > "SB" <chicbearsmook@hotmail.com> wrote in message
> > news:36wnc.2952$n7P1.1713@twister01.bloor.is.net.c able.rogers.com...
> > > touch up sticks??
> > > You mean you cover the scratches on your jeep? haha
> > >
> > > Sorry....I baby'd my jeep for a while when I first bought it. But I
> always
> > > said....it gets pampered until I get the first scratch. I opened the
> door
> > > in a parking lot that was off camber and my door flew open and hit their
> > > mirror. But a knick on the edge of my door. SO...that was it...no more
> > > baby'ing!! haha
> > >
> > I cover the scratches to keep rust to a minimum & the first thing I do
> when
> > I get home with a new car is give it a kick to break it in right & let it
> know who's boss.
> > You opened the door wrong in a Parking Lot? Man least you could have said
> > you got too close to a tree! LOL
> >
> > L8r - Jersey
> >
> >
> >
> >
> >
>
>

 

That's much better.

L8r - Jersey


"SB" <chicbearsmook@hotmail.com> wrote in message
news:8MSnc.22472$pp.18686@news04.bloor.is.net.cabl e.rogers.com...
> UH YAH....I was showing the salesman how to drive 4x4 over his front rock
> garden and rolled the jeep and put a small knick in the edge of the door
> NEAR his parking lot....howz that?! ;)
>
>
> "Jersey" <IamHellbound@nospam.comcast.net> wrote in message
> news:Jb6dnV8NX7P2-QLdRVn-uw@comcast.com...
> >
> > "SB" <chicbearsmook@hotmail.com> wrote in message
> > news:36wnc.2952$n7P1.1713@twister01.bloor.is.net.c able.rogers.com...
> > > touch up sticks??
> > > You mean you cover the scratches on your jeep? haha
> > >
> > > Sorry....I baby'd my jeep for a while when I first bought it. But I
> always
> > > said....it gets pampered until I get the first scratch. I opened the
> door
> > > in a parking lot that was off camber and my door flew open and hit their
> > > mirror. But a knick on the edge of my door. SO...that was it...no more
> > > baby'ing!! haha
> > >
> > I cover the scratches to keep rust to a minimum & the first thing I do
> when
> > I get home with a new car is give it a kick to break it in right & let it
> know who's boss.
> > You opened the door wrong in a Parking Lot? Man least you could have said
> > you got too close to a tree! LOL
> >
> > L8r - Jersey
> >
> >
> >
> >
> >
>
>

 

That's much better.

L8r - Jersey


"SB" <chicbearsmook@hotmail.com> wrote in message
news:8MSnc.22472$pp.18686@news04.bloor.is.net.cabl e.rogers.com...
> UH YAH....I was showing the salesman how to drive 4x4 over his front rock
> garden and rolled the jeep and put a small knick in the edge of the door
> NEAR his parking lot....howz that?! ;)
>
>
> "Jersey" <IamHellbound@nospam.comcast.net> wrote in message
> news:Jb6dnV8NX7P2-QLdRVn-uw@comcast.com...
> >
> > "SB" <chicbearsmook@hotmail.com> wrote in message
> > news:36wnc.2952$n7P1.1713@twister01.bloor.is.net.c able.rogers.com...
> > > touch up sticks??
> > > You mean you cover the scratches on your jeep? haha
> > >
> > > Sorry....I baby'd my jeep for a while when I first bought it. But I
> always
> > > said....it gets pampered until I get the first scratch. I opened the
> door
> > > in a parking lot that was off camber and my door flew open and hit their
> > > mirror. But a knick on the edge of my door. SO...that was it...no more
> > > baby'ing!! haha
> > >
> > I cover the scratches to keep rust to a minimum & the first thing I do
> when
> > I get home with a new car is give it a kick to break it in right & let it
> know who's boss.
> > You opened the door wrong in a Parking Lot? Man least you could have said
> > you got too close to a tree! LOL
> >
> > L8r - Jersey
> >
> >
> >
> >
> >
>
>

 

On Sun, 9 May 2004 07:23:35 -0400, "Jersey"
<IamHellbound@nospam.comcast.net> wrote:

>
>
>A little known fact is that Loctite makes a adhesive remover
>& you can put this stuff on & it will soak down the threads to
>get the job done. I've used this stuff in work with some success.
>If you go to the Loctite page it's advertised as:
>
>X-NMS® CleanUp Solvent for Instant Adhesives
>
>You might run into some problem with paint covering the bolt
>head in the area your talking about. I had to remove the bolts
>on the windshield brackets on my TJ when I installed a Garvin
>Wilderness expedition rack & I made sure I had a new torx
>bit & it was the CORRECT SIZE. It seems that especially with
>torx bolts that a smaller size bit will feel like its the right size
>but there will be just enough slop to mess up the bolt head.
>I know that on one of the Harleys that I had that they had their
>own size torx for something or other & I had to go & buy the
>torx bit from Harley

Ah, the famed T-27 on the derby cover and the primary inspection
cover. Oddly enough, the first cheapo set of Torx bits I bought at
some local swap meet had a T-27 included. It's the only bit of that
set that's still left around, and just for that reason(the bikes).
All the rest went in the trash when I replaced them with Snap On's
--
Old Crow
'82 Shovelhead FLT 92" 'Pearl'
'95 Jeep YJ Rio Grande
ASE Certified Master Auto Tech + L1
TOMKAT, BS#133, SENS, MAMBM, DOF#51

 

On Sun, 9 May 2004 07:23:35 -0400, "Jersey"
<IamHellbound@nospam.comcast.net> wrote:

>
>
>A little known fact is that Loctite makes a adhesive remover
>& you can put this stuff on & it will soak down the threads to
>get the job done. I've used this stuff in work with some success.
>If you go to the Loctite page it's advertised as:
>
>X-NMS® CleanUp Solvent for Instant Adhesives
>
>You might run into some problem with paint covering the bolt
>head in the area your talking about. I had to remove the bolts
>on the windshield brackets on my TJ when I installed a Garvin
>Wilderness expedition rack & I made sure I had a new torx
>bit & it was the CORRECT SIZE. It seems that especially with
>torx bolts that a smaller size bit will feel like its the right size
>but there will be just enough slop to mess up the bolt head.
>I know that on one of the Harleys that I had that they had their
>own size torx for something or other & I had to go & buy the
>torx bit from Harley

Ah, the famed T-27 on the derby cover and the primary inspection
cover. Oddly enough, the first cheapo set of Torx bits I bought at
some local swap meet had a T-27 included. It's the only bit of that
set that's still left around, and just for that reason(the bikes).
All the rest went in the trash when I replaced them with Snap On's
--
Old Crow
'82 Shovelhead FLT 92" 'Pearl'
'95 Jeep YJ Rio Grande
ASE Certified Master Auto Tech + L1
TOMKAT, BS#133, SENS, MAMBM, DOF#51

 

On Sun, 9 May 2004 07:23:35 -0400, "Jersey"
<IamHellbound@nospam.comcast.net> wrote:

>
>
>A little known fact is that Loctite makes a adhesive remover
>& you can put this stuff on & it will soak down the threads to
>get the job done. I've used this stuff in work with some success.
>If you go to the Loctite page it's advertised as:
>
>X-NMS® CleanUp Solvent for Instant Adhesives
>
>You might run into some problem with paint covering the bolt
>head in the area your talking about. I had to remove the bolts
>on the windshield brackets on my TJ when I installed a Garvin
>Wilderness expedition rack & I made sure I had a new torx
>bit & it was the CORRECT SIZE. It seems that especially with
>torx bolts that a smaller size bit will feel like its the right size
>but there will be just enough slop to mess up the bolt head.
>I know that on one of the Harleys that I had that they had their
>own size torx for something or other & I had to go & buy the
>torx bit from Harley

Ah, the famed T-27 on the derby cover and the primary inspection
cover. Oddly enough, the first cheapo set of Torx bits I bought at
some local swap meet had a T-27 included. It's the only bit of that
set that's still left around, and just for that reason(the bikes).
All the rest went in the trash when I replaced them with Snap On's
--
Old Crow
'82 Shovelhead FLT 92" 'Pearl'
'95 Jeep YJ Rio Grande
ASE Certified Master Auto Tech + L1
TOMKAT, BS#133, SENS, MAMBM, DOF#51

 

On Sun, 9 May 2004 07:23:35 -0400, "Jersey"
<IamHellbound@nospam.comcast.net> wrote:

>
>
>A little known fact is that Loctite makes a adhesive remover
>& you can put this stuff on & it will soak down the threads to
>get the job done. I've used this stuff in work with some success.
>If you go to the Loctite page it's advertised as:
>
>X-NMS® CleanUp Solvent for Instant Adhesives
>
>You might run into some problem with paint covering the bolt
>head in the area your talking about. I had to remove the bolts
>on the windshield brackets on my TJ when I installed a Garvin
>Wilderness expedition rack & I made sure I had a new torx
>bit & it was the CORRECT SIZE. It seems that especially with
>torx bolts that a smaller size bit will feel like its the right size
>but there will be just enough slop to mess up the bolt head.
>I know that on one of the Harleys that I had that they had their
>own size torx for something or other & I had to go & buy the
>torx bit from Harley

Ah, the famed T-27 on the derby cover and the primary inspection
cover. Oddly enough, the first cheapo set of Torx bits I bought at
some local swap meet had a T-27 included. It's the only bit of that
set that's still left around, and just for that reason(the bikes).
All the rest went in the trash when I replaced them with Snap On's
--
Old Crow
'82 Shovelhead FLT 92" 'Pearl'
'95 Jeep YJ Rio Grande
ASE Certified Master Auto Tech + L1
TOMKAT, BS#133, SENS, MAMBM, DOF#51