Ping > Nathan - welding question
01-19-2004, 01:08 AM
#61
Guest
Posts: n/a
Re: Ping > Nathan - welding question
http://www.monograms-inc.com/jeep/jeepin-bumper.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Fletcher wrote:
>
> Post pics please. I am working on making some bumpers / tire carriers too,
> but that is the big problem, how to make them not rattle and droop. I have
> heard of using a trailer axle to pivot from, are you thinking along those
> lines?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Fletcher wrote:
>
> Post pics please. I am working on making some bumpers / tire carriers too,
> but that is the big problem, how to make them not rattle and droop. I have
> heard of using a trailer axle to pivot from, are you thinking along those
> lines?
01-19-2004, 08:33 AM
#62
Guest
Posts: n/a
Re: Ping > Nathan - welding question
Later today, I am at work now, but I will hook you up tonight.
Jerry
"Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
>
> Hey Jerry,
>
> Got any pics?
>
> Brian
>
> "Jerry Newton" <figatmcttelecom.com> wrote in message
> news:400b304e_3@newspeer2.tds.net...
> > I also considered many designs, because I also become annoyed by things
> that
> > rattle and/or come loose. As I was scratching my head, wondering what I
> > could use that would be durable, I happened to glance at my bench, where
> > there just happened to be a throw-away rear driveline out of an S10
> pickup.
> > I thought to myself that the Ujoint is custom made to handle large
> twisting
> > loads.
>
>
Jerry
"Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
>
> Hey Jerry,
>
> Got any pics?
>
> Brian
>
> "Jerry Newton" <figatmcttelecom.com> wrote in message
> news:400b304e_3@newspeer2.tds.net...
> > I also considered many designs, because I also become annoyed by things
> that
> > rattle and/or come loose. As I was scratching my head, wondering what I
> > could use that would be durable, I happened to glance at my bench, where
> > there just happened to be a throw-away rear driveline out of an S10
> pickup.
> > I thought to myself that the Ujoint is custom made to handle large
> twisting
> > loads.
>
>
01-19-2004, 08:33 AM
#63
Guest
Posts: n/a
Re: Ping > Nathan - welding question
Later today, I am at work now, but I will hook you up tonight.
Jerry
"Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
>
> Hey Jerry,
>
> Got any pics?
>
> Brian
>
> "Jerry Newton" <figatmcttelecom.com> wrote in message
> news:400b304e_3@newspeer2.tds.net...
> > I also considered many designs, because I also become annoyed by things
> that
> > rattle and/or come loose. As I was scratching my head, wondering what I
> > could use that would be durable, I happened to glance at my bench, where
> > there just happened to be a throw-away rear driveline out of an S10
> pickup.
> > I thought to myself that the Ujoint is custom made to handle large
> twisting
> > loads.
>
>
Jerry
"Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
>
> Hey Jerry,
>
> Got any pics?
>
> Brian
>
> "Jerry Newton" <figatmcttelecom.com> wrote in message
> news:400b304e_3@newspeer2.tds.net...
> > I also considered many designs, because I also become annoyed by things
> that
> > rattle and/or come loose. As I was scratching my head, wondering what I
> > could use that would be durable, I happened to glance at my bench, where
> > there just happened to be a throw-away rear driveline out of an S10
> pickup.
> > I thought to myself that the Ujoint is custom made to handle large
> twisting
> > loads.
>
>
01-19-2004, 08:33 AM
#64
Guest
Posts: n/a
Re: Ping > Nathan - welding question
Later today, I am at work now, but I will hook you up tonight.
Jerry
"Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
>
> Hey Jerry,
>
> Got any pics?
>
> Brian
>
> "Jerry Newton" <figatmcttelecom.com> wrote in message
> news:400b304e_3@newspeer2.tds.net...
> > I also considered many designs, because I also become annoyed by things
> that
> > rattle and/or come loose. As I was scratching my head, wondering what I
> > could use that would be durable, I happened to glance at my bench, where
> > there just happened to be a throw-away rear driveline out of an S10
> pickup.
> > I thought to myself that the Ujoint is custom made to handle large
> twisting
> > loads.
>
>
Jerry
"Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
>
> Hey Jerry,
>
> Got any pics?
>
> Brian
>
> "Jerry Newton" <figatmcttelecom.com> wrote in message
> news:400b304e_3@newspeer2.tds.net...
> > I also considered many designs, because I also become annoyed by things
> that
> > rattle and/or come loose. As I was scratching my head, wondering what I
> > could use that would be durable, I happened to glance at my bench, where
> > there just happened to be a throw-away rear driveline out of an S10
> pickup.
> > I thought to myself that the Ujoint is custom made to handle large
> twisting
> > loads.
>
>
01-19-2004, 08:10 PM
#65
Guest
Posts: n/a
Re: Ping > Nathan - welding question
I attached a picture of the back of White Trash Jeep..... sorry for file
size, but I wanted to make it good enough for someone to zoom and hopefully
see what I did. Also, I know it is a bad angle to show how I attached the
Ujoint to the bumper. I will try to find another pic, I have them
somewhere.
Jerry
"Jerry Newton" <fig@mcttelecom.com> wrote in message
news:400bdb4b_1@newspeer2.tds.net...
> Later today, I am at work now, but I will hook you up tonight.
>
> Jerry
>
> "Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
> news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
> >
> > Hey Jerry,
> >
> > Got any pics?
> >
> > Brian
> >
> > "Jerry Newton" <figatmcttelecom.com> wrote in message
> > news:400b304e_3@newspeer2.tds.net...
> > > I also considered many designs, because I also become annoyed by
things
> > that
> > > rattle and/or come loose. As I was scratching my head, wondering what
I
> > > could use that would be durable, I happened to glance at my bench,
where
> > > there just happened to be a throw-away rear driveline out of an S10
> > pickup.
> > > I thought to myself that the Ujoint is custom made to handle large
> > twisting
> > > loads.
> >
> >
>
>
size, but I wanted to make it good enough for someone to zoom and hopefully
see what I did. Also, I know it is a bad angle to show how I attached the
Ujoint to the bumper. I will try to find another pic, I have them
somewhere.
Jerry
"Jerry Newton" <fig@mcttelecom.com> wrote in message
news:400bdb4b_1@newspeer2.tds.net...
> Later today, I am at work now, but I will hook you up tonight.
>
> Jerry
>
> "Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
> news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
> >
> > Hey Jerry,
> >
> > Got any pics?
> >
> > Brian
> >
> > "Jerry Newton" <figatmcttelecom.com> wrote in message
> > news:400b304e_3@newspeer2.tds.net...
> > > I also considered many designs, because I also become annoyed by
things
> > that
> > > rattle and/or come loose. As I was scratching my head, wondering what
I
> > > could use that would be durable, I happened to glance at my bench,
where
> > > there just happened to be a throw-away rear driveline out of an S10
> > pickup.
> > > I thought to myself that the Ujoint is custom made to handle large
> > twisting
> > > loads.
> >
> >
>
>
01-19-2004, 08:10 PM
#66
Guest
Posts: n/a
Re: Ping > Nathan - welding question
I attached a picture of the back of White Trash Jeep..... sorry for file
size, but I wanted to make it good enough for someone to zoom and hopefully
see what I did. Also, I know it is a bad angle to show how I attached the
Ujoint to the bumper. I will try to find another pic, I have them
somewhere.
Jerry
"Jerry Newton" <fig@mcttelecom.com> wrote in message
news:400bdb4b_1@newspeer2.tds.net...
> Later today, I am at work now, but I will hook you up tonight.
>
> Jerry
>
> "Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
> news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
> >
> > Hey Jerry,
> >
> > Got any pics?
> >
> > Brian
> >
> > "Jerry Newton" <figatmcttelecom.com> wrote in message
> > news:400b304e_3@newspeer2.tds.net...
> > > I also considered many designs, because I also become annoyed by
things
> > that
> > > rattle and/or come loose. As I was scratching my head, wondering what
I
> > > could use that would be durable, I happened to glance at my bench,
where
> > > there just happened to be a throw-away rear driveline out of an S10
> > pickup.
> > > I thought to myself that the Ujoint is custom made to handle large
> > twisting
> > > loads.
> >
> >
>
>
size, but I wanted to make it good enough for someone to zoom and hopefully
see what I did. Also, I know it is a bad angle to show how I attached the
Ujoint to the bumper. I will try to find another pic, I have them
somewhere.
Jerry
"Jerry Newton" <fig@mcttelecom.com> wrote in message
news:400bdb4b_1@newspeer2.tds.net...
> Later today, I am at work now, but I will hook you up tonight.
>
> Jerry
>
> "Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
> news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
> >
> > Hey Jerry,
> >
> > Got any pics?
> >
> > Brian
> >
> > "Jerry Newton" <figatmcttelecom.com> wrote in message
> > news:400b304e_3@newspeer2.tds.net...
> > > I also considered many designs, because I also become annoyed by
things
> > that
> > > rattle and/or come loose. As I was scratching my head, wondering what
I
> > > could use that would be durable, I happened to glance at my bench,
where
> > > there just happened to be a throw-away rear driveline out of an S10
> > pickup.
> > > I thought to myself that the Ujoint is custom made to handle large
> > twisting
> > > loads.
> >
> >
>
>
01-19-2004, 08:10 PM
#67
Guest
Posts: n/a
Re: Ping > Nathan - welding question
I attached a picture of the back of White Trash Jeep..... sorry for file
size, but I wanted to make it good enough for someone to zoom and hopefully
see what I did. Also, I know it is a bad angle to show how I attached the
Ujoint to the bumper. I will try to find another pic, I have them
somewhere.
Jerry
"Jerry Newton" <fig@mcttelecom.com> wrote in message
news:400bdb4b_1@newspeer2.tds.net...
> Later today, I am at work now, but I will hook you up tonight.
>
> Jerry
>
> "Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
> news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
> >
> > Hey Jerry,
> >
> > Got any pics?
> >
> > Brian
> >
> > "Jerry Newton" <figatmcttelecom.com> wrote in message
> > news:400b304e_3@newspeer2.tds.net...
> > > I also considered many designs, because I also become annoyed by
things
> > that
> > > rattle and/or come loose. As I was scratching my head, wondering what
I
> > > could use that would be durable, I happened to glance at my bench,
where
> > > there just happened to be a throw-away rear driveline out of an S10
> > pickup.
> > > I thought to myself that the Ujoint is custom made to handle large
> > twisting
> > > loads.
> >
> >
>
>
size, but I wanted to make it good enough for someone to zoom and hopefully
see what I did. Also, I know it is a bad angle to show how I attached the
Ujoint to the bumper. I will try to find another pic, I have them
somewhere.
Jerry
"Jerry Newton" <fig@mcttelecom.com> wrote in message
news:400bdb4b_1@newspeer2.tds.net...
> Later today, I am at work now, but I will hook you up tonight.
>
> Jerry
>
> "Bulletsnbrains" <Bulletsnbrains@mungedemailaddy.net> wrote in message
> news:YSJOb.1767$BA2.495@newssvr26.news.prodigy.com ...
> >
> > Hey Jerry,
> >
> > Got any pics?
> >
> > Brian
> >
> > "Jerry Newton" <figatmcttelecom.com> wrote in message
> > news:400b304e_3@newspeer2.tds.net...
> > > I also considered many designs, because I also become annoyed by
things
> > that
> > > rattle and/or come loose. As I was scratching my head, wondering what
I
> > > could use that would be durable, I happened to glance at my bench,
where
> > > there just happened to be a throw-away rear driveline out of an S10
> > pickup.
> > > I thought to myself that the Ujoint is custom made to handle large
> > twisting
> > > loads.
> >
> >
>
>
01-19-2004, 09:11 PM
#68
Guest
Posts: n/a
Re: Ping > Nathan - welding question
In article <400bdb4b_1@newspeer2.tds.net>, "Jerry Newton" <fig@mcttelecom.com>
writes:
>
>Later today, I am at work now, but I will hook you up tonight.
>
>Jerry
PLease post the URL, I bet everyone here would like to see...
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
writes:
>
>Later today, I am at work now, but I will hook you up tonight.
>
>Jerry
PLease post the URL, I bet everyone here would like to see...
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
01-19-2004, 09:11 PM
#69
Guest
Posts: n/a
Re: Ping > Nathan - welding question
In article <400bdb4b_1@newspeer2.tds.net>, "Jerry Newton" <fig@mcttelecom.com>
writes:
>
>Later today, I am at work now, but I will hook you up tonight.
>
>Jerry
PLease post the URL, I bet everyone here would like to see...
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
writes:
>
>Later today, I am at work now, but I will hook you up tonight.
>
>Jerry
PLease post the URL, I bet everyone here would like to see...
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
01-19-2004, 09:11 PM
#70
Guest
Posts: n/a
Re: Ping > Nathan - welding question
In article <400bdb4b_1@newspeer2.tds.net>, "Jerry Newton" <fig@mcttelecom.com>
writes:
>
>Later today, I am at work now, but I will hook you up tonight.
>
>Jerry
PLease post the URL, I bet everyone here would like to see...
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
writes:
>
>Later today, I am at work now, but I will hook you up tonight.
>
>Jerry
PLease post the URL, I bet everyone here would like to see...
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
