"over-run" brakes?
04-17-2005, 01:39 AM
#11
Guest
Posts: n/a
Re: "over-run" brakes?
"John Davies" <saab95aerowagon@yahoo.com> wrote in message
news:k7p361h2cnrrir8k95igsgm8158u30nl8c@4ax.com...
> but lots more expensive than plain vanilla Dexter electric
> brakes.
just yesterday i ordered a 7x18 haulmark kodiak
http://www.haulmark.com/php/products...model_id=70117
enclosed trailer. electric brakes are included in the base price of the
trailer, the hydraulic surge brakes are an addition $900+ ($600 on the 7000
gvwr trailer, but i got the 10000). as you can see in my invoice
http://img185.echo.cx/img185/3082/trailer7rj.jpg it was worth the $900 to me
to have the convenience of the surge brakes.
> You can control the trailer's behavior
> much more precisely and easily with an electric controller than you
> can with a surge brake actuator.
i disagree completely with this statement. electric brake controllers
require adjustment any time your load or the terrain) changes. yes you can
get "close" with numbered settings but youll rarely set it "perfect" even if
it "feels right". to much adjustment (even just enough that you dont even
notice it) and you wear the trailer brakes prematurely. not enough and you
wear the vehicle brakes prematurely. coming down bozeman pass at 90mph
pulling 10000 pounds will require a lot more braking than slowing for
traffic as you climb it. adjusting on the fly like that sucks and can
rarely be done with precision the first try.
> For example, you can dial back the
> braking current on gravel roads or wet pavement to prevent premature
> lockup, and you can manually apply just the trailer brakes if you need
> to. Neither of these is possible with surge brkaes.
what are you talking about? "dialing" it isnt necessary at all on surge
brakes because you only get exactly what you need anyway. premature lock up
isnt a concern with surge brakes because the vehicle will provide less
braking pressure anyway as it will also have less traction on gravel roads
or wet pavement. this is the beauty of surge brakes, and this is why rental
trailers are equipped with them....theyre idiot proof and require no
thinking or adjustment. i could have made electric brakes work just fine
but i also wanted a trailer that my wife could just hook up to and run,
without have to try to teach her how to get close with an electric
adjustment. besides, with the nature of my work the load would change many
times throughout the day and the self adjustment of the surge was the way to
go.
that said, the expense involved makes surge brakes impractical for most and
anything that can be pulled by a swb jeep would probably do just fine with
electrics.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:k7p361h2cnrrir8k95igsgm8158u30nl8c@4ax.com...
> but lots more expensive than plain vanilla Dexter electric
> brakes.
just yesterday i ordered a 7x18 haulmark kodiak
http://www.haulmark.com/php/products...model_id=70117
enclosed trailer. electric brakes are included in the base price of the
trailer, the hydraulic surge brakes are an addition $900+ ($600 on the 7000
gvwr trailer, but i got the 10000). as you can see in my invoice
http://img185.echo.cx/img185/3082/trailer7rj.jpg it was worth the $900 to me
to have the convenience of the surge brakes.
> You can control the trailer's behavior
> much more precisely and easily with an electric controller than you
> can with a surge brake actuator.
i disagree completely with this statement. electric brake controllers
require adjustment any time your load or the terrain) changes. yes you can
get "close" with numbered settings but youll rarely set it "perfect" even if
it "feels right". to much adjustment (even just enough that you dont even
notice it) and you wear the trailer brakes prematurely. not enough and you
wear the vehicle brakes prematurely. coming down bozeman pass at 90mph
pulling 10000 pounds will require a lot more braking than slowing for
traffic as you climb it. adjusting on the fly like that sucks and can
rarely be done with precision the first try.
> For example, you can dial back the
> braking current on gravel roads or wet pavement to prevent premature
> lockup, and you can manually apply just the trailer brakes if you need
> to. Neither of these is possible with surge brkaes.
what are you talking about? "dialing" it isnt necessary at all on surge
brakes because you only get exactly what you need anyway. premature lock up
isnt a concern with surge brakes because the vehicle will provide less
braking pressure anyway as it will also have less traction on gravel roads
or wet pavement. this is the beauty of surge brakes, and this is why rental
trailers are equipped with them....theyre idiot proof and require no
thinking or adjustment. i could have made electric brakes work just fine
but i also wanted a trailer that my wife could just hook up to and run,
without have to try to teach her how to get close with an electric
adjustment. besides, with the nature of my work the load would change many
times throughout the day and the self adjustment of the surge was the way to
go.
that said, the expense involved makes surge brakes impractical for most and
anything that can be pulled by a swb jeep would probably do just fine with
electrics.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
04-17-2005, 01:39 AM
#12
Guest
Posts: n/a
Re: "over-run" brakes?
"John Davies" <saab95aerowagon@yahoo.com> wrote in message
news:k7p361h2cnrrir8k95igsgm8158u30nl8c@4ax.com...
> but lots more expensive than plain vanilla Dexter electric
> brakes.
just yesterday i ordered a 7x18 haulmark kodiak
http://www.haulmark.com/php/products...model_id=70117
enclosed trailer. electric brakes are included in the base price of the
trailer, the hydraulic surge brakes are an addition $900+ ($600 on the 7000
gvwr trailer, but i got the 10000). as you can see in my invoice
http://img185.echo.cx/img185/3082/trailer7rj.jpg it was worth the $900 to me
to have the convenience of the surge brakes.
> You can control the trailer's behavior
> much more precisely and easily with an electric controller than you
> can with a surge brake actuator.
i disagree completely with this statement. electric brake controllers
require adjustment any time your load or the terrain) changes. yes you can
get "close" with numbered settings but youll rarely set it "perfect" even if
it "feels right". to much adjustment (even just enough that you dont even
notice it) and you wear the trailer brakes prematurely. not enough and you
wear the vehicle brakes prematurely. coming down bozeman pass at 90mph
pulling 10000 pounds will require a lot more braking than slowing for
traffic as you climb it. adjusting on the fly like that sucks and can
rarely be done with precision the first try.
> For example, you can dial back the
> braking current on gravel roads or wet pavement to prevent premature
> lockup, and you can manually apply just the trailer brakes if you need
> to. Neither of these is possible with surge brkaes.
what are you talking about? "dialing" it isnt necessary at all on surge
brakes because you only get exactly what you need anyway. premature lock up
isnt a concern with surge brakes because the vehicle will provide less
braking pressure anyway as it will also have less traction on gravel roads
or wet pavement. this is the beauty of surge brakes, and this is why rental
trailers are equipped with them....theyre idiot proof and require no
thinking or adjustment. i could have made electric brakes work just fine
but i also wanted a trailer that my wife could just hook up to and run,
without have to try to teach her how to get close with an electric
adjustment. besides, with the nature of my work the load would change many
times throughout the day and the self adjustment of the surge was the way to
go.
that said, the expense involved makes surge brakes impractical for most and
anything that can be pulled by a swb jeep would probably do just fine with
electrics.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:k7p361h2cnrrir8k95igsgm8158u30nl8c@4ax.com...
> but lots more expensive than plain vanilla Dexter electric
> brakes.
just yesterday i ordered a 7x18 haulmark kodiak
http://www.haulmark.com/php/products...model_id=70117
enclosed trailer. electric brakes are included in the base price of the
trailer, the hydraulic surge brakes are an addition $900+ ($600 on the 7000
gvwr trailer, but i got the 10000). as you can see in my invoice
http://img185.echo.cx/img185/3082/trailer7rj.jpg it was worth the $900 to me
to have the convenience of the surge brakes.
> You can control the trailer's behavior
> much more precisely and easily with an electric controller than you
> can with a surge brake actuator.
i disagree completely with this statement. electric brake controllers
require adjustment any time your load or the terrain) changes. yes you can
get "close" with numbered settings but youll rarely set it "perfect" even if
it "feels right". to much adjustment (even just enough that you dont even
notice it) and you wear the trailer brakes prematurely. not enough and you
wear the vehicle brakes prematurely. coming down bozeman pass at 90mph
pulling 10000 pounds will require a lot more braking than slowing for
traffic as you climb it. adjusting on the fly like that sucks and can
rarely be done with precision the first try.
> For example, you can dial back the
> braking current on gravel roads or wet pavement to prevent premature
> lockup, and you can manually apply just the trailer brakes if you need
> to. Neither of these is possible with surge brkaes.
what are you talking about? "dialing" it isnt necessary at all on surge
brakes because you only get exactly what you need anyway. premature lock up
isnt a concern with surge brakes because the vehicle will provide less
braking pressure anyway as it will also have less traction on gravel roads
or wet pavement. this is the beauty of surge brakes, and this is why rental
trailers are equipped with them....theyre idiot proof and require no
thinking or adjustment. i could have made electric brakes work just fine
but i also wanted a trailer that my wife could just hook up to and run,
without have to try to teach her how to get close with an electric
adjustment. besides, with the nature of my work the load would change many
times throughout the day and the self adjustment of the surge was the way to
go.
that said, the expense involved makes surge brakes impractical for most and
anything that can be pulled by a swb jeep would probably do just fine with
electrics.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
04-17-2005, 01:39 AM
#13
Guest
Posts: n/a
Re: "over-run" brakes?
"John Davies" <saab95aerowagon@yahoo.com> wrote in message
news:k7p361h2cnrrir8k95igsgm8158u30nl8c@4ax.com...
> but lots more expensive than plain vanilla Dexter electric
> brakes.
just yesterday i ordered a 7x18 haulmark kodiak
http://www.haulmark.com/php/products...model_id=70117
enclosed trailer. electric brakes are included in the base price of the
trailer, the hydraulic surge brakes are an addition $900+ ($600 on the 7000
gvwr trailer, but i got the 10000). as you can see in my invoice
http://img185.echo.cx/img185/3082/trailer7rj.jpg it was worth the $900 to me
to have the convenience of the surge brakes.
> You can control the trailer's behavior
> much more precisely and easily with an electric controller than you
> can with a surge brake actuator.
i disagree completely with this statement. electric brake controllers
require adjustment any time your load or the terrain) changes. yes you can
get "close" with numbered settings but youll rarely set it "perfect" even if
it "feels right". to much adjustment (even just enough that you dont even
notice it) and you wear the trailer brakes prematurely. not enough and you
wear the vehicle brakes prematurely. coming down bozeman pass at 90mph
pulling 10000 pounds will require a lot more braking than slowing for
traffic as you climb it. adjusting on the fly like that sucks and can
rarely be done with precision the first try.
> For example, you can dial back the
> braking current on gravel roads or wet pavement to prevent premature
> lockup, and you can manually apply just the trailer brakes if you need
> to. Neither of these is possible with surge brkaes.
what are you talking about? "dialing" it isnt necessary at all on surge
brakes because you only get exactly what you need anyway. premature lock up
isnt a concern with surge brakes because the vehicle will provide less
braking pressure anyway as it will also have less traction on gravel roads
or wet pavement. this is the beauty of surge brakes, and this is why rental
trailers are equipped with them....theyre idiot proof and require no
thinking or adjustment. i could have made electric brakes work just fine
but i also wanted a trailer that my wife could just hook up to and run,
without have to try to teach her how to get close with an electric
adjustment. besides, with the nature of my work the load would change many
times throughout the day and the self adjustment of the surge was the way to
go.
that said, the expense involved makes surge brakes impractical for most and
anything that can be pulled by a swb jeep would probably do just fine with
electrics.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:k7p361h2cnrrir8k95igsgm8158u30nl8c@4ax.com...
> but lots more expensive than plain vanilla Dexter electric
> brakes.
just yesterday i ordered a 7x18 haulmark kodiak
http://www.haulmark.com/php/products...model_id=70117
enclosed trailer. electric brakes are included in the base price of the
trailer, the hydraulic surge brakes are an addition $900+ ($600 on the 7000
gvwr trailer, but i got the 10000). as you can see in my invoice
http://img185.echo.cx/img185/3082/trailer7rj.jpg it was worth the $900 to me
to have the convenience of the surge brakes.
> You can control the trailer's behavior
> much more precisely and easily with an electric controller than you
> can with a surge brake actuator.
i disagree completely with this statement. electric brake controllers
require adjustment any time your load or the terrain) changes. yes you can
get "close" with numbered settings but youll rarely set it "perfect" even if
it "feels right". to much adjustment (even just enough that you dont even
notice it) and you wear the trailer brakes prematurely. not enough and you
wear the vehicle brakes prematurely. coming down bozeman pass at 90mph
pulling 10000 pounds will require a lot more braking than slowing for
traffic as you climb it. adjusting on the fly like that sucks and can
rarely be done with precision the first try.
> For example, you can dial back the
> braking current on gravel roads or wet pavement to prevent premature
> lockup, and you can manually apply just the trailer brakes if you need
> to. Neither of these is possible with surge brkaes.
what are you talking about? "dialing" it isnt necessary at all on surge
brakes because you only get exactly what you need anyway. premature lock up
isnt a concern with surge brakes because the vehicle will provide less
braking pressure anyway as it will also have less traction on gravel roads
or wet pavement. this is the beauty of surge brakes, and this is why rental
trailers are equipped with them....theyre idiot proof and require no
thinking or adjustment. i could have made electric brakes work just fine
but i also wanted a trailer that my wife could just hook up to and run,
without have to try to teach her how to get close with an electric
adjustment. besides, with the nature of my work the load would change many
times throughout the day and the self adjustment of the surge was the way to
go.
that said, the expense involved makes surge brakes impractical for most and
anything that can be pulled by a swb jeep would probably do just fine with
electrics.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
04-17-2005, 01:50 AM
#14
Guest
Posts: n/a
Re: "over-run" brakes?
"Michael White" <michael12@mindspring.com> wrote in message
news:ujl8e.7675$An2.7612@newsread2.news.pas.earthl ink.net...
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer.
with surge brakes the tongue of the trailer itself is actually a hydraulic
brake pedal. as the vehicle brakes, the trailer moves into the vehicle with
more force, pushing the tongue in harder, thus pressing its own brake pedal.
as the trailer brakes slow the trailer, the pressure against the tow vehicle
is less so it releases the brake pedal completely synchronous with how hard
the vehicle is braking.
"The "surge" or "push" of the trailer toward the automobile automatically
synchronizes the trailer brakes with the automobile brake. As the trailer
pushes against the car, the actuator telescopes together and applies the
force to the master cylinder, supplying hydraulic pressure to the brakes."
most decent surge actuators have a bypass so you can back the trailer up
hill without actuating the brakes.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:ujl8e.7675$An2.7612@newsread2.news.pas.earthl ink.net...
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer.
with surge brakes the tongue of the trailer itself is actually a hydraulic
brake pedal. as the vehicle brakes, the trailer moves into the vehicle with
more force, pushing the tongue in harder, thus pressing its own brake pedal.
as the trailer brakes slow the trailer, the pressure against the tow vehicle
is less so it releases the brake pedal completely synchronous with how hard
the vehicle is braking.
"The "surge" or "push" of the trailer toward the automobile automatically
synchronizes the trailer brakes with the automobile brake. As the trailer
pushes against the car, the actuator telescopes together and applies the
force to the master cylinder, supplying hydraulic pressure to the brakes."
most decent surge actuators have a bypass so you can back the trailer up
hill without actuating the brakes.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
04-17-2005, 01:50 AM
#15
Guest
Posts: n/a
Re: "over-run" brakes?
"Michael White" <michael12@mindspring.com> wrote in message
news:ujl8e.7675$An2.7612@newsread2.news.pas.earthl ink.net...
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer.
with surge brakes the tongue of the trailer itself is actually a hydraulic
brake pedal. as the vehicle brakes, the trailer moves into the vehicle with
more force, pushing the tongue in harder, thus pressing its own brake pedal.
as the trailer brakes slow the trailer, the pressure against the tow vehicle
is less so it releases the brake pedal completely synchronous with how hard
the vehicle is braking.
"The "surge" or "push" of the trailer toward the automobile automatically
synchronizes the trailer brakes with the automobile brake. As the trailer
pushes against the car, the actuator telescopes together and applies the
force to the master cylinder, supplying hydraulic pressure to the brakes."
most decent surge actuators have a bypass so you can back the trailer up
hill without actuating the brakes.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:ujl8e.7675$An2.7612@newsread2.news.pas.earthl ink.net...
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer.
with surge brakes the tongue of the trailer itself is actually a hydraulic
brake pedal. as the vehicle brakes, the trailer moves into the vehicle with
more force, pushing the tongue in harder, thus pressing its own brake pedal.
as the trailer brakes slow the trailer, the pressure against the tow vehicle
is less so it releases the brake pedal completely synchronous with how hard
the vehicle is braking.
"The "surge" or "push" of the trailer toward the automobile automatically
synchronizes the trailer brakes with the automobile brake. As the trailer
pushes against the car, the actuator telescopes together and applies the
force to the master cylinder, supplying hydraulic pressure to the brakes."
most decent surge actuators have a bypass so you can back the trailer up
hill without actuating the brakes.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
04-17-2005, 01:50 AM
#16
Guest
Posts: n/a
Re: "over-run" brakes?
"Michael White" <michael12@mindspring.com> wrote in message
news:ujl8e.7675$An2.7612@newsread2.news.pas.earthl ink.net...
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer.
with surge brakes the tongue of the trailer itself is actually a hydraulic
brake pedal. as the vehicle brakes, the trailer moves into the vehicle with
more force, pushing the tongue in harder, thus pressing its own brake pedal.
as the trailer brakes slow the trailer, the pressure against the tow vehicle
is less so it releases the brake pedal completely synchronous with how hard
the vehicle is braking.
"The "surge" or "push" of the trailer toward the automobile automatically
synchronizes the trailer brakes with the automobile brake. As the trailer
pushes against the car, the actuator telescopes together and applies the
force to the master cylinder, supplying hydraulic pressure to the brakes."
most decent surge actuators have a bypass so you can back the trailer up
hill without actuating the brakes.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:ujl8e.7675$An2.7612@newsread2.news.pas.earthl ink.net...
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer.
with surge brakes the tongue of the trailer itself is actually a hydraulic
brake pedal. as the vehicle brakes, the trailer moves into the vehicle with
more force, pushing the tongue in harder, thus pressing its own brake pedal.
as the trailer brakes slow the trailer, the pressure against the tow vehicle
is less so it releases the brake pedal completely synchronous with how hard
the vehicle is braking.
"The "surge" or "push" of the trailer toward the automobile automatically
synchronizes the trailer brakes with the automobile brake. As the trailer
pushes against the car, the actuator telescopes together and applies the
force to the master cylinder, supplying hydraulic pressure to the brakes."
most decent surge actuators have a bypass so you can back the trailer up
hill without actuating the brakes.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
04-17-2005, 01:50 AM
#17
Guest
Posts: n/a
Re: "over-run" brakes?
"Michael White" <michael12@mindspring.com> wrote in message
news:ujl8e.7675$An2.7612@newsread2.news.pas.earthl ink.net...
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer.
with surge brakes the tongue of the trailer itself is actually a hydraulic
brake pedal. as the vehicle brakes, the trailer moves into the vehicle with
more force, pushing the tongue in harder, thus pressing its own brake pedal.
as the trailer brakes slow the trailer, the pressure against the tow vehicle
is less so it releases the brake pedal completely synchronous with how hard
the vehicle is braking.
"The "surge" or "push" of the trailer toward the automobile automatically
synchronizes the trailer brakes with the automobile brake. As the trailer
pushes against the car, the actuator telescopes together and applies the
force to the master cylinder, supplying hydraulic pressure to the brakes."
most decent surge actuators have a bypass so you can back the trailer up
hill without actuating the brakes.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:ujl8e.7675$An2.7612@newsread2.news.pas.earthl ink.net...
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer.
with surge brakes the tongue of the trailer itself is actually a hydraulic
brake pedal. as the vehicle brakes, the trailer moves into the vehicle with
more force, pushing the tongue in harder, thus pressing its own brake pedal.
as the trailer brakes slow the trailer, the pressure against the tow vehicle
is less so it releases the brake pedal completely synchronous with how hard
the vehicle is braking.
"The "surge" or "push" of the trailer toward the automobile automatically
synchronizes the trailer brakes with the automobile brake. As the trailer
pushes against the car, the actuator telescopes together and applies the
force to the master cylinder, supplying hydraulic pressure to the brakes."
most decent surge actuators have a bypass so you can back the trailer up
hill without actuating the brakes.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
04-17-2005, 03:04 AM
#18
Guest
Posts: n/a
Re: "over-run" brakes?
Vehicle tow ratings:
http://www.gonecamping.net/stories/tow_ratings.html
Kalifornia trailers with a gross weight of 1500 pounds must have
brakes: http://www.dmv.ca.gov/pubs/dl648/dl648pt12.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Michael White wrote:
>
> While perusing a Land Rover web page, I noticed that the towing capacity of
> a Defender 90 is similar to that of a Jeep's except when using a trailer
> with "over-run" brakes, in which case the towing capacity is about 7,700
> lbs (3,500 kgs).
>
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer. Would this
> also work for a Jeep? Is anyone familiar with "over-run" brakes? It seems
> they're more popular in Europe than in the US.
>
> Thanks.
> --
> Michael White "To protect people from the effects of folly is to
> fill the world with fools." -Herbert Spencer
http://www.gonecamping.net/stories/tow_ratings.html
Kalifornia trailers with a gross weight of 1500 pounds must have
brakes: http://www.dmv.ca.gov/pubs/dl648/dl648pt12.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Michael White wrote:
>
> While perusing a Land Rover web page, I noticed that the towing capacity of
> a Defender 90 is similar to that of a Jeep's except when using a trailer
> with "over-run" brakes, in which case the towing capacity is about 7,700
> lbs (3,500 kgs).
>
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer. Would this
> also work for a Jeep? Is anyone familiar with "over-run" brakes? It seems
> they're more popular in Europe than in the US.
>
> Thanks.
> --
> Michael White "To protect people from the effects of folly is to
> fill the world with fools." -Herbert Spencer
04-17-2005, 03:04 AM
#19
Guest
Posts: n/a
Re: "over-run" brakes?
Vehicle tow ratings:
http://www.gonecamping.net/stories/tow_ratings.html
Kalifornia trailers with a gross weight of 1500 pounds must have
brakes: http://www.dmv.ca.gov/pubs/dl648/dl648pt12.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Michael White wrote:
>
> While perusing a Land Rover web page, I noticed that the towing capacity of
> a Defender 90 is similar to that of a Jeep's except when using a trailer
> with "over-run" brakes, in which case the towing capacity is about 7,700
> lbs (3,500 kgs).
>
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer. Would this
> also work for a Jeep? Is anyone familiar with "over-run" brakes? It seems
> they're more popular in Europe than in the US.
>
> Thanks.
> --
> Michael White "To protect people from the effects of folly is to
> fill the world with fools." -Herbert Spencer
http://www.gonecamping.net/stories/tow_ratings.html
Kalifornia trailers with a gross weight of 1500 pounds must have
brakes: http://www.dmv.ca.gov/pubs/dl648/dl648pt12.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Michael White wrote:
>
> While perusing a Land Rover web page, I noticed that the towing capacity of
> a Defender 90 is similar to that of a Jeep's except when using a trailer
> with "over-run" brakes, in which case the towing capacity is about 7,700
> lbs (3,500 kgs).
>
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer. Would this
> also work for a Jeep? Is anyone familiar with "over-run" brakes? It seems
> they're more popular in Europe than in the US.
>
> Thanks.
> --
> Michael White "To protect people from the effects of folly is to
> fill the world with fools." -Herbert Spencer
04-17-2005, 03:04 AM
#20
Guest
Posts: n/a
Re: "over-run" brakes?
Vehicle tow ratings:
http://www.gonecamping.net/stories/tow_ratings.html
Kalifornia trailers with a gross weight of 1500 pounds must have
brakes: http://www.dmv.ca.gov/pubs/dl648/dl648pt12.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Michael White wrote:
>
> While perusing a Land Rover web page, I noticed that the towing capacity of
> a Defender 90 is similar to that of a Jeep's except when using a trailer
> with "over-run" brakes, in which case the towing capacity is about 7,700
> lbs (3,500 kgs).
>
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer. Would this
> also work for a Jeep? Is anyone familiar with "over-run" brakes? It seems
> they're more popular in Europe than in the US.
>
> Thanks.
> --
> Michael White "To protect people from the effects of folly is to
> fill the world with fools." -Herbert Spencer
http://www.gonecamping.net/stories/tow_ratings.html
Kalifornia trailers with a gross weight of 1500 pounds must have
brakes: http://www.dmv.ca.gov/pubs/dl648/dl648pt12.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Michael White wrote:
>
> While perusing a Land Rover web page, I noticed that the towing capacity of
> a Defender 90 is similar to that of a Jeep's except when using a trailer
> with "over-run" brakes, in which case the towing capacity is about 7,700
> lbs (3,500 kgs).
>
> I did a search on "over-run" brakes, and it seems there's a sensor in the
> trailer hitch or ball that controls the brakes on the trailer. Would this
> also work for a Jeep? Is anyone familiar with "over-run" brakes? It seems
> they're more popular in Europe than in the US.
>
> Thanks.
> --
> Michael White "To protect people from the effects of folly is to
> fill the world with fools." -Herbert Spencer
