Ok, don't laugh or How much does a short block weigh?
03-04-2004, 03:16 PM
#11
Guest
Posts: n/a
Re: Ok, don't laugh or How much does a short block weigh?
What you really need is a buddy with a pick up truck.
Use the truck to bring the cherry picker over to the apartment complex, pull
the motor and drop it into the truck, and drag the picker away. It shouldn't
take more than about an hour to get this all done. You can pull all of the
electrics and many of the bolts before the picker rolls in, and this will
trim the exposure time with the manager.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> Ok guys, don't laugh. This is running through my head as a possible plan.
>
> If I can get a collapsible engine hoist I think I could pull the engine
> without my manager knowing the better. Then the question is to get the
> block to the machinist. He is only a couple of miles away.
>
> I was thinking of getting a pull by hand cart to stick it on and pull it
out
> of my complex covered up (like a wagon or something).
>
> I would need a cart strong enough to carry the short block and would roll
> freely over speed bumps etc.
>
> Anyone can recommend a cart that might work?
>
> Thanks,
>
> Billo
>
>
Use the truck to bring the cherry picker over to the apartment complex, pull
the motor and drop it into the truck, and drag the picker away. It shouldn't
take more than about an hour to get this all done. You can pull all of the
electrics and many of the bolts before the picker rolls in, and this will
trim the exposure time with the manager.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> Ok guys, don't laugh. This is running through my head as a possible plan.
>
> If I can get a collapsible engine hoist I think I could pull the engine
> without my manager knowing the better. Then the question is to get the
> block to the machinist. He is only a couple of miles away.
>
> I was thinking of getting a pull by hand cart to stick it on and pull it
out
> of my complex covered up (like a wagon or something).
>
> I would need a cart strong enough to carry the short block and would roll
> freely over speed bumps etc.
>
> Anyone can recommend a cart that might work?
>
> Thanks,
>
> Billo
>
>
03-04-2004, 03:16 PM
#12
Guest
Posts: n/a
Re: Ok, don't laugh or How much does a short block weigh?
What you really need is a buddy with a pick up truck.
Use the truck to bring the cherry picker over to the apartment complex, pull
the motor and drop it into the truck, and drag the picker away. It shouldn't
take more than about an hour to get this all done. You can pull all of the
electrics and many of the bolts before the picker rolls in, and this will
trim the exposure time with the manager.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> Ok guys, don't laugh. This is running through my head as a possible plan.
>
> If I can get a collapsible engine hoist I think I could pull the engine
> without my manager knowing the better. Then the question is to get the
> block to the machinist. He is only a couple of miles away.
>
> I was thinking of getting a pull by hand cart to stick it on and pull it
out
> of my complex covered up (like a wagon or something).
>
> I would need a cart strong enough to carry the short block and would roll
> freely over speed bumps etc.
>
> Anyone can recommend a cart that might work?
>
> Thanks,
>
> Billo
>
>
Use the truck to bring the cherry picker over to the apartment complex, pull
the motor and drop it into the truck, and drag the picker away. It shouldn't
take more than about an hour to get this all done. You can pull all of the
electrics and many of the bolts before the picker rolls in, and this will
trim the exposure time with the manager.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> Ok guys, don't laugh. This is running through my head as a possible plan.
>
> If I can get a collapsible engine hoist I think I could pull the engine
> without my manager knowing the better. Then the question is to get the
> block to the machinist. He is only a couple of miles away.
>
> I was thinking of getting a pull by hand cart to stick it on and pull it
out
> of my complex covered up (like a wagon or something).
>
> I would need a cart strong enough to carry the short block and would roll
> freely over speed bumps etc.
>
> Anyone can recommend a cart that might work?
>
> Thanks,
>
> Billo
>
>
03-04-2004, 03:16 PM
#13
Guest
Posts: n/a
Re: Ok, don't laugh or How much does a short block weigh?
What you really need is a buddy with a pick up truck.
Use the truck to bring the cherry picker over to the apartment complex, pull
the motor and drop it into the truck, and drag the picker away. It shouldn't
take more than about an hour to get this all done. You can pull all of the
electrics and many of the bolts before the picker rolls in, and this will
trim the exposure time with the manager.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> Ok guys, don't laugh. This is running through my head as a possible plan.
>
> If I can get a collapsible engine hoist I think I could pull the engine
> without my manager knowing the better. Then the question is to get the
> block to the machinist. He is only a couple of miles away.
>
> I was thinking of getting a pull by hand cart to stick it on and pull it
out
> of my complex covered up (like a wagon or something).
>
> I would need a cart strong enough to carry the short block and would roll
> freely over speed bumps etc.
>
> Anyone can recommend a cart that might work?
>
> Thanks,
>
> Billo
>
>
Use the truck to bring the cherry picker over to the apartment complex, pull
the motor and drop it into the truck, and drag the picker away. It shouldn't
take more than about an hour to get this all done. You can pull all of the
electrics and many of the bolts before the picker rolls in, and this will
trim the exposure time with the manager.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> Ok guys, don't laugh. This is running through my head as a possible plan.
>
> If I can get a collapsible engine hoist I think I could pull the engine
> without my manager knowing the better. Then the question is to get the
> block to the machinist. He is only a couple of miles away.
>
> I was thinking of getting a pull by hand cart to stick it on and pull it
out
> of my complex covered up (like a wagon or something).
>
> I would need a cart strong enough to carry the short block and would roll
> freely over speed bumps etc.
>
> Anyone can recommend a cart that might work?
>
> Thanks,
>
> Billo
>
>
03-04-2004, 04:04 PM
#14
Guest
Posts: n/a
Re: Ok, don't laugh or How much does a short block weigh?
What does it take to unbolt the short block from the frame/tranny. I know
there are two engine mounts, one of which I have undone already. What about
bolts to the tranny or other things?
Thanks,
Bill
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
> What you really need is a buddy with a pick up truck.
>
> Use the truck to bring the cherry picker over to the apartment complex,
pull
> the motor and drop it into the truck, and drag the picker away. It
shouldn't
> take more than about an hour to get this all done. You can pull all of the
> electrics and many of the bolts before the picker rolls in, and this will
> trim the exposure time with the manager.
>
>
>
>
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> > Ok guys, don't laugh. This is running through my head as a possible
plan.
> >
> > If I can get a collapsible engine hoist I think I could pull the engine
> > without my manager knowing the better. Then the question is to get the
> > block to the machinist. He is only a couple of miles away.
> >
> > I was thinking of getting a pull by hand cart to stick it on and pull it
> out
> > of my complex covered up (like a wagon or something).
> >
> > I would need a cart strong enough to carry the short block and would
roll
> > freely over speed bumps etc.
> >
> > Anyone can recommend a cart that might work?
> >
> > Thanks,
> >
> > Billo
> >
> >
>
there are two engine mounts, one of which I have undone already. What about
bolts to the tranny or other things?
Thanks,
Bill
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
> What you really need is a buddy with a pick up truck.
>
> Use the truck to bring the cherry picker over to the apartment complex,
pull
> the motor and drop it into the truck, and drag the picker away. It
shouldn't
> take more than about an hour to get this all done. You can pull all of the
> electrics and many of the bolts before the picker rolls in, and this will
> trim the exposure time with the manager.
>
>
>
>
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> > Ok guys, don't laugh. This is running through my head as a possible
plan.
> >
> > If I can get a collapsible engine hoist I think I could pull the engine
> > without my manager knowing the better. Then the question is to get the
> > block to the machinist. He is only a couple of miles away.
> >
> > I was thinking of getting a pull by hand cart to stick it on and pull it
> out
> > of my complex covered up (like a wagon or something).
> >
> > I would need a cart strong enough to carry the short block and would
roll
> > freely over speed bumps etc.
> >
> > Anyone can recommend a cart that might work?
> >
> > Thanks,
> >
> > Billo
> >
> >
>
03-04-2004, 04:04 PM
#15
Guest
Posts: n/a
Re: Ok, don't laugh or How much does a short block weigh?
What does it take to unbolt the short block from the frame/tranny. I know
there are two engine mounts, one of which I have undone already. What about
bolts to the tranny or other things?
Thanks,
Bill
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
> What you really need is a buddy with a pick up truck.
>
> Use the truck to bring the cherry picker over to the apartment complex,
pull
> the motor and drop it into the truck, and drag the picker away. It
shouldn't
> take more than about an hour to get this all done. You can pull all of the
> electrics and many of the bolts before the picker rolls in, and this will
> trim the exposure time with the manager.
>
>
>
>
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> > Ok guys, don't laugh. This is running through my head as a possible
plan.
> >
> > If I can get a collapsible engine hoist I think I could pull the engine
> > without my manager knowing the better. Then the question is to get the
> > block to the machinist. He is only a couple of miles away.
> >
> > I was thinking of getting a pull by hand cart to stick it on and pull it
> out
> > of my complex covered up (like a wagon or something).
> >
> > I would need a cart strong enough to carry the short block and would
roll
> > freely over speed bumps etc.
> >
> > Anyone can recommend a cart that might work?
> >
> > Thanks,
> >
> > Billo
> >
> >
>
there are two engine mounts, one of which I have undone already. What about
bolts to the tranny or other things?
Thanks,
Bill
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
> What you really need is a buddy with a pick up truck.
>
> Use the truck to bring the cherry picker over to the apartment complex,
pull
> the motor and drop it into the truck, and drag the picker away. It
shouldn't
> take more than about an hour to get this all done. You can pull all of the
> electrics and many of the bolts before the picker rolls in, and this will
> trim the exposure time with the manager.
>
>
>
>
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> > Ok guys, don't laugh. This is running through my head as a possible
plan.
> >
> > If I can get a collapsible engine hoist I think I could pull the engine
> > without my manager knowing the better. Then the question is to get the
> > block to the machinist. He is only a couple of miles away.
> >
> > I was thinking of getting a pull by hand cart to stick it on and pull it
> out
> > of my complex covered up (like a wagon or something).
> >
> > I would need a cart strong enough to carry the short block and would
roll
> > freely over speed bumps etc.
> >
> > Anyone can recommend a cart that might work?
> >
> > Thanks,
> >
> > Billo
> >
> >
>
03-04-2004, 04:04 PM
#16
Guest
Posts: n/a
Re: Ok, don't laugh or How much does a short block weigh?
What does it take to unbolt the short block from the frame/tranny. I know
there are two engine mounts, one of which I have undone already. What about
bolts to the tranny or other things?
Thanks,
Bill
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
> What you really need is a buddy with a pick up truck.
>
> Use the truck to bring the cherry picker over to the apartment complex,
pull
> the motor and drop it into the truck, and drag the picker away. It
shouldn't
> take more than about an hour to get this all done. You can pull all of the
> electrics and many of the bolts before the picker rolls in, and this will
> trim the exposure time with the manager.
>
>
>
>
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> > Ok guys, don't laugh. This is running through my head as a possible
plan.
> >
> > If I can get a collapsible engine hoist I think I could pull the engine
> > without my manager knowing the better. Then the question is to get the
> > block to the machinist. He is only a couple of miles away.
> >
> > I was thinking of getting a pull by hand cart to stick it on and pull it
> out
> > of my complex covered up (like a wagon or something).
> >
> > I would need a cart strong enough to carry the short block and would
roll
> > freely over speed bumps etc.
> >
> > Anyone can recommend a cart that might work?
> >
> > Thanks,
> >
> > Billo
> >
> >
>
there are two engine mounts, one of which I have undone already. What about
bolts to the tranny or other things?
Thanks,
Bill
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
> What you really need is a buddy with a pick up truck.
>
> Use the truck to bring the cherry picker over to the apartment complex,
pull
> the motor and drop it into the truck, and drag the picker away. It
shouldn't
> take more than about an hour to get this all done. You can pull all of the
> electrics and many of the bolts before the picker rolls in, and this will
> trim the exposure time with the manager.
>
>
>
>
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> > Ok guys, don't laugh. This is running through my head as a possible
plan.
> >
> > If I can get a collapsible engine hoist I think I could pull the engine
> > without my manager knowing the better. Then the question is to get the
> > block to the machinist. He is only a couple of miles away.
> >
> > I was thinking of getting a pull by hand cart to stick it on and pull it
> out
> > of my complex covered up (like a wagon or something).
> >
> > I would need a cart strong enough to carry the short block and would
roll
> > freely over speed bumps etc.
> >
> > Anyone can recommend a cart that might work?
> >
> > Thanks,
> >
> > Billo
> >
> >
>
03-04-2004, 04:08 PM
#17
Guest
Posts: n/a
Re: Ok, don't laugh or How much does a short block weigh?
Good plan but ... call the manager and report a "gas like odor" in the
stairwell furthest from your parking spot... this will buy you some extra
"crap! I forgot to disconnect the..." time.
-Brian
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
: What you really need is a buddy with a pick up truck.
:
: Use the truck to bring the cherry picker over to the apartment complex,
pull
: the motor and drop it into the truck, and drag the picker away. It
shouldn't
: take more than about an hour to get this all done. You can pull all of the
: electrics and many of the bolts before the picker rolls in, and this will
: trim the exposure time with the manager.
:
:
:
:
:
: "William Oliveri" <wuji@bigvalley.net> wrote in message
: news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
: > Ok guys, don't laugh. This is running through my head as a possible
plan.
: >
: > If I can get a collapsible engine hoist I think I could pull the engine
: > without my manager knowing the better. Then the question is to get the
: > block to the machinist. He is only a couple of miles away.
: >
: > I was thinking of getting a pull by hand cart to stick it on and pull it
: out
: > of my complex covered up (like a wagon or something).
: >
: > I would need a cart strong enough to carry the short block and would
roll
: > freely over speed bumps etc.
: >
: > Anyone can recommend a cart that might work?
: >
: > Thanks,
: >
: > Billo
: >
: >
:
stairwell furthest from your parking spot... this will buy you some extra
"crap! I forgot to disconnect the..." time.
-Brian
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
: What you really need is a buddy with a pick up truck.
:
: Use the truck to bring the cherry picker over to the apartment complex,
pull
: the motor and drop it into the truck, and drag the picker away. It
shouldn't
: take more than about an hour to get this all done. You can pull all of the
: electrics and many of the bolts before the picker rolls in, and this will
: trim the exposure time with the manager.
:
:
:
:
:
: "William Oliveri" <wuji@bigvalley.net> wrote in message
: news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
: > Ok guys, don't laugh. This is running through my head as a possible
plan.
: >
: > If I can get a collapsible engine hoist I think I could pull the engine
: > without my manager knowing the better. Then the question is to get the
: > block to the machinist. He is only a couple of miles away.
: >
: > I was thinking of getting a pull by hand cart to stick it on and pull it
: out
: > of my complex covered up (like a wagon or something).
: >
: > I would need a cart strong enough to carry the short block and would
roll
: > freely over speed bumps etc.
: >
: > Anyone can recommend a cart that might work?
: >
: > Thanks,
: >
: > Billo
: >
: >
:
03-04-2004, 04:08 PM
#18
Guest
Posts: n/a
Re: Ok, don't laugh or How much does a short block weigh?
Good plan but ... call the manager and report a "gas like odor" in the
stairwell furthest from your parking spot... this will buy you some extra
"crap! I forgot to disconnect the..." time.
-Brian
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
: What you really need is a buddy with a pick up truck.
:
: Use the truck to bring the cherry picker over to the apartment complex,
pull
: the motor and drop it into the truck, and drag the picker away. It
shouldn't
: take more than about an hour to get this all done. You can pull all of the
: electrics and many of the bolts before the picker rolls in, and this will
: trim the exposure time with the manager.
:
:
:
:
:
: "William Oliveri" <wuji@bigvalley.net> wrote in message
: news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
: > Ok guys, don't laugh. This is running through my head as a possible
plan.
: >
: > If I can get a collapsible engine hoist I think I could pull the engine
: > without my manager knowing the better. Then the question is to get the
: > block to the machinist. He is only a couple of miles away.
: >
: > I was thinking of getting a pull by hand cart to stick it on and pull it
: out
: > of my complex covered up (like a wagon or something).
: >
: > I would need a cart strong enough to carry the short block and would
roll
: > freely over speed bumps etc.
: >
: > Anyone can recommend a cart that might work?
: >
: > Thanks,
: >
: > Billo
: >
: >
:
stairwell furthest from your parking spot... this will buy you some extra
"crap! I forgot to disconnect the..." time.
-Brian
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
: What you really need is a buddy with a pick up truck.
:
: Use the truck to bring the cherry picker over to the apartment complex,
pull
: the motor and drop it into the truck, and drag the picker away. It
shouldn't
: take more than about an hour to get this all done. You can pull all of the
: electrics and many of the bolts before the picker rolls in, and this will
: trim the exposure time with the manager.
:
:
:
:
:
: "William Oliveri" <wuji@bigvalley.net> wrote in message
: news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
: > Ok guys, don't laugh. This is running through my head as a possible
plan.
: >
: > If I can get a collapsible engine hoist I think I could pull the engine
: > without my manager knowing the better. Then the question is to get the
: > block to the machinist. He is only a couple of miles away.
: >
: > I was thinking of getting a pull by hand cart to stick it on and pull it
: out
: > of my complex covered up (like a wagon or something).
: >
: > I would need a cart strong enough to carry the short block and would
roll
: > freely over speed bumps etc.
: >
: > Anyone can recommend a cart that might work?
: >
: > Thanks,
: >
: > Billo
: >
: >
:
03-04-2004, 04:08 PM
#19
Guest
Posts: n/a
Re: Ok, don't laugh or How much does a short block weigh?
Good plan but ... call the manager and report a "gas like odor" in the
stairwell furthest from your parking spot... this will buy you some extra
"crap! I forgot to disconnect the..." time.
-Brian
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
: What you really need is a buddy with a pick up truck.
:
: Use the truck to bring the cherry picker over to the apartment complex,
pull
: the motor and drop it into the truck, and drag the picker away. It
shouldn't
: take more than about an hour to get this all done. You can pull all of the
: electrics and many of the bolts before the picker rolls in, and this will
: trim the exposure time with the manager.
:
:
:
:
:
: "William Oliveri" <wuji@bigvalley.net> wrote in message
: news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
: > Ok guys, don't laugh. This is running through my head as a possible
plan.
: >
: > If I can get a collapsible engine hoist I think I could pull the engine
: > without my manager knowing the better. Then the question is to get the
: > block to the machinist. He is only a couple of miles away.
: >
: > I was thinking of getting a pull by hand cart to stick it on and pull it
: out
: > of my complex covered up (like a wagon or something).
: >
: > I would need a cart strong enough to carry the short block and would
roll
: > freely over speed bumps etc.
: >
: > Anyone can recommend a cart that might work?
: >
: > Thanks,
: >
: > Billo
: >
: >
:
stairwell furthest from your parking spot... this will buy you some extra
"crap! I forgot to disconnect the..." time.
-Brian
"CRWLR" <beerman@yahoo.com> wrote in message
news:104f3nd5c68iddd@corp.supernews.com...
: What you really need is a buddy with a pick up truck.
:
: Use the truck to bring the cherry picker over to the apartment complex,
pull
: the motor and drop it into the truck, and drag the picker away. It
shouldn't
: take more than about an hour to get this all done. You can pull all of the
: electrics and many of the bolts before the picker rolls in, and this will
: trim the exposure time with the manager.
:
:
:
:
:
: "William Oliveri" <wuji@bigvalley.net> wrote in message
: news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
: > Ok guys, don't laugh. This is running through my head as a possible
plan.
: >
: > If I can get a collapsible engine hoist I think I could pull the engine
: > without my manager knowing the better. Then the question is to get the
: > block to the machinist. He is only a couple of miles away.
: >
: > I was thinking of getting a pull by hand cart to stick it on and pull it
: out
: > of my complex covered up (like a wagon or something).
: >
: > I would need a cart strong enough to carry the short block and would
roll
: > freely over speed bumps etc.
: >
: > Anyone can recommend a cart that might work?
: >
: > Thanks,
: >
: > Billo
: >
: >
:
03-04-2004, 04:14 PM
#20
Guest
Posts: n/a
Re: Ok, don't laugh or How much does a short block weigh?
The manager lives off property and usually strolls through with his dog
every once in a while. His daughter lives on property but they are more
"relaxed". I don't even know what he'd do if he caught me. I know he told
another tenet to stop working on his truck because the appt complex doesn't
carry insurance for this kind of stuff.
Well, let's see how sneaky I can be :-)
Billo
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:RUM1c.137510$Qg7.58399@news04.bloor.is.net.ca ble.rogers.com...
> Good plan but ... call the manager and report a "gas like odor" in the
> stairwell furthest from your parking spot... this will buy you some extra
> "crap! I forgot to disconnect the..." time.
> -Brian
>
> "CRWLR" <beerman@yahoo.com> wrote in message
> news:104f3nd5c68iddd@corp.supernews.com...
> : What you really need is a buddy with a pick up truck.
> :
> : Use the truck to bring the cherry picker over to the apartment complex,
> pull
> : the motor and drop it into the truck, and drag the picker away. It
> shouldn't
> : take more than about an hour to get this all done. You can pull all of
the
> : electrics and many of the bolts before the picker rolls in, and this
will
> : trim the exposure time with the manager.
> :
> :
> :
> :
> :
> : "William Oliveri" <wuji@bigvalley.net> wrote in message
> : news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> : > Ok guys, don't laugh. This is running through my head as a possible
> plan.
> : >
> : > If I can get a collapsible engine hoist I think I could pull the
engine
> : > without my manager knowing the better. Then the question is to get
the
> : > block to the machinist. He is only a couple of miles away.
> : >
> : > I was thinking of getting a pull by hand cart to stick it on and pull
it
> : out
> : > of my complex covered up (like a wagon or something).
> : >
> : > I would need a cart strong enough to carry the short block and would
> roll
> : > freely over speed bumps etc.
> : >
> : > Anyone can recommend a cart that might work?
> : >
> : > Thanks,
> : >
> : > Billo
> : >
> : >
> :
>
>
every once in a while. His daughter lives on property but they are more
"relaxed". I don't even know what he'd do if he caught me. I know he told
another tenet to stop working on his truck because the appt complex doesn't
carry insurance for this kind of stuff.
Well, let's see how sneaky I can be :-)
Billo
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:RUM1c.137510$Qg7.58399@news04.bloor.is.net.ca ble.rogers.com...
> Good plan but ... call the manager and report a "gas like odor" in the
> stairwell furthest from your parking spot... this will buy you some extra
> "crap! I forgot to disconnect the..." time.
> -Brian
>
> "CRWLR" <beerman@yahoo.com> wrote in message
> news:104f3nd5c68iddd@corp.supernews.com...
> : What you really need is a buddy with a pick up truck.
> :
> : Use the truck to bring the cherry picker over to the apartment complex,
> pull
> : the motor and drop it into the truck, and drag the picker away. It
> shouldn't
> : take more than about an hour to get this all done. You can pull all of
the
> : electrics and many of the bolts before the picker rolls in, and this
will
> : trim the exposure time with the manager.
> :
> :
> :
> :
> :
> : "William Oliveri" <wuji@bigvalley.net> wrote in message
> : news:c27vie$1psfv1$1@ID-193866.news.uni-berlin.de...
> : > Ok guys, don't laugh. This is running through my head as a possible
> plan.
> : >
> : > If I can get a collapsible engine hoist I think I could pull the
engine
> : > without my manager knowing the better. Then the question is to get
the
> : > block to the machinist. He is only a couple of miles away.
> : >
> : > I was thinking of getting a pull by hand cart to stick it on and pull
it
> : out
> : > of my complex covered up (like a wagon or something).
> : >
> : > I would need a cart strong enough to carry the short block and would
> roll
> : > freely over speed bumps etc.
> : >
> : > Anyone can recommend a cart that might work?
> : >
> : > Thanks,
> : >
> : > Billo
> : >
> : >
> :
>
>
