O.T. tach for chainsaw?
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
sirometer
can be ordered at any briggs and stratton shop 12.00 us doll hairs
FrankW wrote:
> Hello Group.
> After rebuilding the carb for my little Homelite chainsaw.
> I needed to readjust the hi and lo jets.
> The lo jet was easy enough but to adjust the hi speed jet
> the manual says to adjust to 11,000 - 11,500 rpm.
> What kind of tool do you use to measure the rpm?
> Thanks in advance.
> Frank .....lousy mechanic.....worse plumber
can be ordered at any briggs and stratton shop 12.00 us doll hairs
FrankW wrote:
> Hello Group.
> After rebuilding the carb for my little Homelite chainsaw.
> I needed to readjust the hi and lo jets.
> The lo jet was easy enough but to adjust the hi speed jet
> the manual says to adjust to 11,000 - 11,500 rpm.
> What kind of tool do you use to measure the rpm?
> Thanks in advance.
> Frank .....lousy mechanic.....worse plumber
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
sirometer
can be ordered at any briggs and stratton shop 12.00 us doll hairs
FrankW wrote:
> Hello Group.
> After rebuilding the carb for my little Homelite chainsaw.
> I needed to readjust the hi and lo jets.
> The lo jet was easy enough but to adjust the hi speed jet
> the manual says to adjust to 11,000 - 11,500 rpm.
> What kind of tool do you use to measure the rpm?
> Thanks in advance.
> Frank .....lousy mechanic.....worse plumber
can be ordered at any briggs and stratton shop 12.00 us doll hairs
FrankW wrote:
> Hello Group.
> After rebuilding the carb for my little Homelite chainsaw.
> I needed to readjust the hi and lo jets.
> The lo jet was easy enough but to adjust the hi speed jet
> the manual says to adjust to 11,000 - 11,500 rpm.
> What kind of tool do you use to measure the rpm?
> Thanks in advance.
> Frank .....lousy mechanic.....worse plumber
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
sirometer
can be ordered at any briggs and stratton shop 12.00 us doll hairs
FrankW wrote:
> Hello Group.
> After rebuilding the carb for my little Homelite chainsaw.
> I needed to readjust the hi and lo jets.
> The lo jet was easy enough but to adjust the hi speed jet
> the manual says to adjust to 11,000 - 11,500 rpm.
> What kind of tool do you use to measure the rpm?
> Thanks in advance.
> Frank .....lousy mechanic.....worse plumber
can be ordered at any briggs and stratton shop 12.00 us doll hairs
FrankW wrote:
> Hello Group.
> After rebuilding the carb for my little Homelite chainsaw.
> I needed to readjust the hi and lo jets.
> The lo jet was easy enough but to adjust the hi speed jet
> the manual says to adjust to 11,000 - 11,500 rpm.
> What kind of tool do you use to measure the rpm?
> Thanks in advance.
> Frank .....lousy mechanic.....worse plumber
Thread
Thread Starter
Forum
Replies
Last Post
DragonRider
Jeep Mailing List
15
Jan 11, 2005 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
