O.T. tach for chainsaw?
09-20-2005, 04:01 PM
#31
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
Been using one for years
http://www.mfgsupply.com/m/c/32-9073.html
--
Coasty
Remove the SPOOGE to reply
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
> Hello Group.
> After rebuilding the carb for my little Homelite chainsaw.
> I needed to readjust the hi and lo jets.
> The lo jet was easy enough but to adjust the hi speed jet
> the manual says to adjust to 11,000 - 11,500 rpm.
> What kind of tool do you use to measure the rpm?
> Thanks in advance.
> Frank .....lousy mechanic.....worse plumber
>
http://www.mfgsupply.com/m/c/32-9073.html
--
Coasty
Remove the SPOOGE to reply
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
> Hello Group.
> After rebuilding the carb for my little Homelite chainsaw.
> I needed to readjust the hi and lo jets.
> The lo jet was easy enough but to adjust the hi speed jet
> the manual says to adjust to 11,000 - 11,500 rpm.
> What kind of tool do you use to measure the rpm?
> Thanks in advance.
> Frank .....lousy mechanic.....worse plumber
>
09-20-2005, 09:30 PM
#32
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
Coasty did pass the time by typing:
> Been using one for years
>
> http://www.mfgsupply.com/m/c/32-9073.html
Couldn't you just use a regular engine rpm
gauge on the spark wire and multiply the result?
I just tune mine by ear.
> Remove the SPOOGE to reply
> "FrankW" <fworm@mxznorpak.ca> wrote in message
> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>> Hello Group.
>> After rebuilding the carb for my little Homelite chainsaw.
>> I needed to readjust the hi and lo jets.
>> The lo jet was easy enough but to adjust the hi speed jet
>> the manual says to adjust to 11,000 - 11,500 rpm.
>> What kind of tool do you use to measure the rpm?
>> Thanks in advance.
>> Frank .....lousy mechanic.....worse plumber
> Been using one for years
>
> http://www.mfgsupply.com/m/c/32-9073.html
Couldn't you just use a regular engine rpm
gauge on the spark wire and multiply the result?
I just tune mine by ear.
> Remove the SPOOGE to reply
> "FrankW" <fworm@mxznorpak.ca> wrote in message
> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>> Hello Group.
>> After rebuilding the carb for my little Homelite chainsaw.
>> I needed to readjust the hi and lo jets.
>> The lo jet was easy enough but to adjust the hi speed jet
>> the manual says to adjust to 11,000 - 11,500 rpm.
>> What kind of tool do you use to measure the rpm?
>> Thanks in advance.
>> Frank .....lousy mechanic.....worse plumber
09-20-2005, 09:30 PM
#33
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
Coasty did pass the time by typing:
> Been using one for years
>
> http://www.mfgsupply.com/m/c/32-9073.html
Couldn't you just use a regular engine rpm
gauge on the spark wire and multiply the result?
I just tune mine by ear.
> Remove the SPOOGE to reply
> "FrankW" <fworm@mxznorpak.ca> wrote in message
> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>> Hello Group.
>> After rebuilding the carb for my little Homelite chainsaw.
>> I needed to readjust the hi and lo jets.
>> The lo jet was easy enough but to adjust the hi speed jet
>> the manual says to adjust to 11,000 - 11,500 rpm.
>> What kind of tool do you use to measure the rpm?
>> Thanks in advance.
>> Frank .....lousy mechanic.....worse plumber
> Been using one for years
>
> http://www.mfgsupply.com/m/c/32-9073.html
Couldn't you just use a regular engine rpm
gauge on the spark wire and multiply the result?
I just tune mine by ear.
> Remove the SPOOGE to reply
> "FrankW" <fworm@mxznorpak.ca> wrote in message
> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>> Hello Group.
>> After rebuilding the carb for my little Homelite chainsaw.
>> I needed to readjust the hi and lo jets.
>> The lo jet was easy enough but to adjust the hi speed jet
>> the manual says to adjust to 11,000 - 11,500 rpm.
>> What kind of tool do you use to measure the rpm?
>> Thanks in advance.
>> Frank .....lousy mechanic.....worse plumber
09-20-2005, 09:30 PM
#34
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
Coasty did pass the time by typing:
> Been using one for years
>
> http://www.mfgsupply.com/m/c/32-9073.html
Couldn't you just use a regular engine rpm
gauge on the spark wire and multiply the result?
I just tune mine by ear.
> Remove the SPOOGE to reply
> "FrankW" <fworm@mxznorpak.ca> wrote in message
> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>> Hello Group.
>> After rebuilding the carb for my little Homelite chainsaw.
>> I needed to readjust the hi and lo jets.
>> The lo jet was easy enough but to adjust the hi speed jet
>> the manual says to adjust to 11,000 - 11,500 rpm.
>> What kind of tool do you use to measure the rpm?
>> Thanks in advance.
>> Frank .....lousy mechanic.....worse plumber
> Been using one for years
>
> http://www.mfgsupply.com/m/c/32-9073.html
Couldn't you just use a regular engine rpm
gauge on the spark wire and multiply the result?
I just tune mine by ear.
> Remove the SPOOGE to reply
> "FrankW" <fworm@mxznorpak.ca> wrote in message
> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>> Hello Group.
>> After rebuilding the carb for my little Homelite chainsaw.
>> I needed to readjust the hi and lo jets.
>> The lo jet was easy enough but to adjust the hi speed jet
>> the manual says to adjust to 11,000 - 11,500 rpm.
>> What kind of tool do you use to measure the rpm?
>> Thanks in advance.
>> Frank .....lousy mechanic.....worse plumber
09-20-2005, 10:02 PM
#35
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
Kind of reminds me of adjusting the mixture of my childhood Fox
..035, but by hear.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
..035, but by hear.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
09-20-2005, 10:02 PM
#36
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
Kind of reminds me of adjusting the mixture of my childhood Fox
..035, but by hear.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
..035, but by hear.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
09-20-2005, 10:02 PM
#37
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
Kind of reminds me of adjusting the mixture of my childhood Fox
..035, but by hear.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
..035, but by hear.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
09-21-2005, 03:53 PM
#38
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
Must have a calibrated ear + or -
--
Coasty
Remove the SPOOGE to reply
"DougW" <post.replies@invalid.address> wrote in message
news:QI2Ye.3838$P34.2396@okepread07...
> Coasty did pass the time by typing:
>> Been using one for years
>>
>> http://www.mfgsupply.com/m/c/32-9073.html
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
>
>> Remove the SPOOGE to reply
>> "FrankW" <fworm@mxznorpak.ca> wrote in message
>> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>>> Hello Group.
>>> After rebuilding the carb for my little Homelite chainsaw.
>>> I needed to readjust the hi and lo jets.
>>> The lo jet was easy enough but to adjust the hi speed jet
>>> the manual says to adjust to 11,000 - 11,500 rpm.
>>> What kind of tool do you use to measure the rpm?
>>> Thanks in advance.
>>> Frank .....lousy mechanic.....worse plumber
>
>
>
--
Coasty
Remove the SPOOGE to reply
"DougW" <post.replies@invalid.address> wrote in message
news:QI2Ye.3838$P34.2396@okepread07...
> Coasty did pass the time by typing:
>> Been using one for years
>>
>> http://www.mfgsupply.com/m/c/32-9073.html
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
>
>> Remove the SPOOGE to reply
>> "FrankW" <fworm@mxznorpak.ca> wrote in message
>> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>>> Hello Group.
>>> After rebuilding the carb for my little Homelite chainsaw.
>>> I needed to readjust the hi and lo jets.
>>> The lo jet was easy enough but to adjust the hi speed jet
>>> the manual says to adjust to 11,000 - 11,500 rpm.
>>> What kind of tool do you use to measure the rpm?
>>> Thanks in advance.
>>> Frank .....lousy mechanic.....worse plumber
>
>
>
09-21-2005, 03:53 PM
#39
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
Must have a calibrated ear + or -
--
Coasty
Remove the SPOOGE to reply
"DougW" <post.replies@invalid.address> wrote in message
news:QI2Ye.3838$P34.2396@okepread07...
> Coasty did pass the time by typing:
>> Been using one for years
>>
>> http://www.mfgsupply.com/m/c/32-9073.html
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
>
>> Remove the SPOOGE to reply
>> "FrankW" <fworm@mxznorpak.ca> wrote in message
>> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>>> Hello Group.
>>> After rebuilding the carb for my little Homelite chainsaw.
>>> I needed to readjust the hi and lo jets.
>>> The lo jet was easy enough but to adjust the hi speed jet
>>> the manual says to adjust to 11,000 - 11,500 rpm.
>>> What kind of tool do you use to measure the rpm?
>>> Thanks in advance.
>>> Frank .....lousy mechanic.....worse plumber
>
>
>
--
Coasty
Remove the SPOOGE to reply
"DougW" <post.replies@invalid.address> wrote in message
news:QI2Ye.3838$P34.2396@okepread07...
> Coasty did pass the time by typing:
>> Been using one for years
>>
>> http://www.mfgsupply.com/m/c/32-9073.html
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
>
>> Remove the SPOOGE to reply
>> "FrankW" <fworm@mxznorpak.ca> wrote in message
>> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>>> Hello Group.
>>> After rebuilding the carb for my little Homelite chainsaw.
>>> I needed to readjust the hi and lo jets.
>>> The lo jet was easy enough but to adjust the hi speed jet
>>> the manual says to adjust to 11,000 - 11,500 rpm.
>>> What kind of tool do you use to measure the rpm?
>>> Thanks in advance.
>>> Frank .....lousy mechanic.....worse plumber
>
>
>
09-21-2005, 03:53 PM
#40
Guest
Posts: n/a
Re: O.T. tach for chainsaw?
Must have a calibrated ear + or -
--
Coasty
Remove the SPOOGE to reply
"DougW" <post.replies@invalid.address> wrote in message
news:QI2Ye.3838$P34.2396@okepread07...
> Coasty did pass the time by typing:
>> Been using one for years
>>
>> http://www.mfgsupply.com/m/c/32-9073.html
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
>
>> Remove the SPOOGE to reply
>> "FrankW" <fworm@mxznorpak.ca> wrote in message
>> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>>> Hello Group.
>>> After rebuilding the carb for my little Homelite chainsaw.
>>> I needed to readjust the hi and lo jets.
>>> The lo jet was easy enough but to adjust the hi speed jet
>>> the manual says to adjust to 11,000 - 11,500 rpm.
>>> What kind of tool do you use to measure the rpm?
>>> Thanks in advance.
>>> Frank .....lousy mechanic.....worse plumber
>
>
>
--
Coasty
Remove the SPOOGE to reply
"DougW" <post.replies@invalid.address> wrote in message
news:QI2Ye.3838$P34.2396@okepread07...
> Coasty did pass the time by typing:
>> Been using one for years
>>
>> http://www.mfgsupply.com/m/c/32-9073.html
>
> Couldn't you just use a regular engine rpm
> gauge on the spark wire and multiply the result?
>
> I just tune mine by ear.
>
>> Remove the SPOOGE to reply
>> "FrankW" <fworm@mxznorpak.ca> wrote in message
>> news:npSdnW0BkujsJbPeRVn-gg@magma.ca...
>>> Hello Group.
>>> After rebuilding the carb for my little Homelite chainsaw.
>>> I needed to readjust the hi and lo jets.
>>> The lo jet was easy enough but to adjust the hi speed jet
>>> the manual says to adjust to 11,000 - 11,500 rpm.
>>> What kind of tool do you use to measure the rpm?
>>> Thanks in advance.
>>> Frank .....lousy mechanic.....worse plumber
>
>
>