nutter by pass for 89 yj
Guest
Posts: n/a
Re: nutter by pass for 89 yj
I think the best is to just add 2 new wires so you don't have to mess
around inside the wiring harness.
You should read the thread on Jeep CJ 258 acceleration issues.
Here are a couple good links on tweaking the 258's:
http://www.off-road.com/jeep/jnutter1.htm
http://home.sprynet.com/~dale02/ignmods.htm
And before you attempt to mess with the mix, the mix must work so here
is a good link on that:
http://www.off-road.com/jeep/tech/engine/carter.html
Before you start, a carb kit is only about $20.00 at CT and is easy to
put in. You really need that carb working or it will 'never' set
stable.
When you set the mix, you need to turn the screws 1/4 at a time with a
rev between each turn. When it starts to miss, back them out 1/4 turn
or just until the burble goes away. The 'sniffer' likes a slight
burble.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
u know who wrote:
>
> couple of questions does anyone have the how to for an 87 and up nutter by
> pass.
> as I understand there is a colour difference in the wiring somewhere.
> can someone give me the modified protocol for the wiring bypass using a the
> newer wire colours for an 87 and on.
> and how much do I turn in the idle mix screws
> just until it starts to miss?
> Thanx to all.
> Scott
around inside the wiring harness.
You should read the thread on Jeep CJ 258 acceleration issues.
Here are a couple good links on tweaking the 258's:
http://www.off-road.com/jeep/jnutter1.htm
http://home.sprynet.com/~dale02/ignmods.htm
And before you attempt to mess with the mix, the mix must work so here
is a good link on that:
http://www.off-road.com/jeep/tech/engine/carter.html
Before you start, a carb kit is only about $20.00 at CT and is easy to
put in. You really need that carb working or it will 'never' set
stable.
When you set the mix, you need to turn the screws 1/4 at a time with a
rev between each turn. When it starts to miss, back them out 1/4 turn
or just until the burble goes away. The 'sniffer' likes a slight
burble.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
u know who wrote:
>
> couple of questions does anyone have the how to for an 87 and up nutter by
> pass.
> as I understand there is a colour difference in the wiring somewhere.
> can someone give me the modified protocol for the wiring bypass using a the
> newer wire colours for an 87 and on.
> and how much do I turn in the idle mix screws
> just until it starts to miss?
> Thanx to all.
> Scott
Guest
Posts: n/a
Re: nutter by pass for 89 yj
I think the best is to just add 2 new wires so you don't have to mess
around inside the wiring harness.
You should read the thread on Jeep CJ 258 acceleration issues.
Here are a couple good links on tweaking the 258's:
http://www.off-road.com/jeep/jnutter1.htm
http://home.sprynet.com/~dale02/ignmods.htm
And before you attempt to mess with the mix, the mix must work so here
is a good link on that:
http://www.off-road.com/jeep/tech/engine/carter.html
Before you start, a carb kit is only about $20.00 at CT and is easy to
put in. You really need that carb working or it will 'never' set
stable.
When you set the mix, you need to turn the screws 1/4 at a time with a
rev between each turn. When it starts to miss, back them out 1/4 turn
or just until the burble goes away. The 'sniffer' likes a slight
burble.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
u know who wrote:
>
> couple of questions does anyone have the how to for an 87 and up nutter by
> pass.
> as I understand there is a colour difference in the wiring somewhere.
> can someone give me the modified protocol for the wiring bypass using a the
> newer wire colours for an 87 and on.
> and how much do I turn in the idle mix screws
> just until it starts to miss?
> Thanx to all.
> Scott
around inside the wiring harness.
You should read the thread on Jeep CJ 258 acceleration issues.
Here are a couple good links on tweaking the 258's:
http://www.off-road.com/jeep/jnutter1.htm
http://home.sprynet.com/~dale02/ignmods.htm
And before you attempt to mess with the mix, the mix must work so here
is a good link on that:
http://www.off-road.com/jeep/tech/engine/carter.html
Before you start, a carb kit is only about $20.00 at CT and is easy to
put in. You really need that carb working or it will 'never' set
stable.
When you set the mix, you need to turn the screws 1/4 at a time with a
rev between each turn. When it starts to miss, back them out 1/4 turn
or just until the burble goes away. The 'sniffer' likes a slight
burble.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
u know who wrote:
>
> couple of questions does anyone have the how to for an 87 and up nutter by
> pass.
> as I understand there is a colour difference in the wiring somewhere.
> can someone give me the modified protocol for the wiring bypass using a the
> newer wire colours for an 87 and on.
> and how much do I turn in the idle mix screws
> just until it starts to miss?
> Thanx to all.
> Scott
Guest
Posts: n/a
Re: nutter by pass for 89 yj
I think the best is to just add 2 new wires so you don't have to mess
around inside the wiring harness.
You should read the thread on Jeep CJ 258 acceleration issues.
Here are a couple good links on tweaking the 258's:
http://www.off-road.com/jeep/jnutter1.htm
http://home.sprynet.com/~dale02/ignmods.htm
And before you attempt to mess with the mix, the mix must work so here
is a good link on that:
http://www.off-road.com/jeep/tech/engine/carter.html
Before you start, a carb kit is only about $20.00 at CT and is easy to
put in. You really need that carb working or it will 'never' set
stable.
When you set the mix, you need to turn the screws 1/4 at a time with a
rev between each turn. When it starts to miss, back them out 1/4 turn
or just until the burble goes away. The 'sniffer' likes a slight
burble.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
u know who wrote:
>
> couple of questions does anyone have the how to for an 87 and up nutter by
> pass.
> as I understand there is a colour difference in the wiring somewhere.
> can someone give me the modified protocol for the wiring bypass using a the
> newer wire colours for an 87 and on.
> and how much do I turn in the idle mix screws
> just until it starts to miss?
> Thanx to all.
> Scott
around inside the wiring harness.
You should read the thread on Jeep CJ 258 acceleration issues.
Here are a couple good links on tweaking the 258's:
http://www.off-road.com/jeep/jnutter1.htm
http://home.sprynet.com/~dale02/ignmods.htm
And before you attempt to mess with the mix, the mix must work so here
is a good link on that:
http://www.off-road.com/jeep/tech/engine/carter.html
Before you start, a carb kit is only about $20.00 at CT and is easy to
put in. You really need that carb working or it will 'never' set
stable.
When you set the mix, you need to turn the screws 1/4 at a time with a
rev between each turn. When it starts to miss, back them out 1/4 turn
or just until the burble goes away. The 'sniffer' likes a slight
burble.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
u know who wrote:
>
> couple of questions does anyone have the how to for an 87 and up nutter by
> pass.
> as I understand there is a colour difference in the wiring somewhere.
> can someone give me the modified protocol for the wiring bypass using a the
> newer wire colours for an 87 and on.
> and how much do I turn in the idle mix screws
> just until it starts to miss?
> Thanx to all.
> Scott
Guest
Posts: n/a
Re: nutter by pass for 89 yj
ha their dyno hard drive broke going in on Monday now.
they did acknowledge that the emission standard for a 4.0L and 4.2L is
different so I get a free redo on my first test
"Snow" <snowbal@sympatico.ca> wrote in message
news:ZF6ae.20708$Jg5.1117403@news20.bellglobal.com ...
> How did the re-test go?
>
> Snow...
>
> "u know who" <wraithyneon@sympatico.ca> wrote in message
> news:%c6ae.9121$9G.694132@news20.bellglobal.com...
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
>>
>
>
they did acknowledge that the emission standard for a 4.0L and 4.2L is
different so I get a free redo on my first test
"Snow" <snowbal@sympatico.ca> wrote in message
news:ZF6ae.20708$Jg5.1117403@news20.bellglobal.com ...
> How did the re-test go?
>
> Snow...
>
> "u know who" <wraithyneon@sympatico.ca> wrote in message
> news:%c6ae.9121$9G.694132@news20.bellglobal.com...
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
>>
>
>
Guest
Posts: n/a
Re: nutter by pass for 89 yj
ha their dyno hard drive broke going in on Monday now.
they did acknowledge that the emission standard for a 4.0L and 4.2L is
different so I get a free redo on my first test
"Snow" <snowbal@sympatico.ca> wrote in message
news:ZF6ae.20708$Jg5.1117403@news20.bellglobal.com ...
> How did the re-test go?
>
> Snow...
>
> "u know who" <wraithyneon@sympatico.ca> wrote in message
> news:%c6ae.9121$9G.694132@news20.bellglobal.com...
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
>>
>
>
they did acknowledge that the emission standard for a 4.0L and 4.2L is
different so I get a free redo on my first test
"Snow" <snowbal@sympatico.ca> wrote in message
news:ZF6ae.20708$Jg5.1117403@news20.bellglobal.com ...
> How did the re-test go?
>
> Snow...
>
> "u know who" <wraithyneon@sympatico.ca> wrote in message
> news:%c6ae.9121$9G.694132@news20.bellglobal.com...
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
>>
>
>
Guest
Posts: n/a
Re: nutter by pass for 89 yj
ha their dyno hard drive broke going in on Monday now.
they did acknowledge that the emission standard for a 4.0L and 4.2L is
different so I get a free redo on my first test
"Snow" <snowbal@sympatico.ca> wrote in message
news:ZF6ae.20708$Jg5.1117403@news20.bellglobal.com ...
> How did the re-test go?
>
> Snow...
>
> "u know who" <wraithyneon@sympatico.ca> wrote in message
> news:%c6ae.9121$9G.694132@news20.bellglobal.com...
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
>>
>
>
they did acknowledge that the emission standard for a 4.0L and 4.2L is
different so I get a free redo on my first test
"Snow" <snowbal@sympatico.ca> wrote in message
news:ZF6ae.20708$Jg5.1117403@news20.bellglobal.com ...
> How did the re-test go?
>
> Snow...
>
> "u know who" <wraithyneon@sympatico.ca> wrote in message
> news:%c6ae.9121$9G.694132@news20.bellglobal.com...
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
>>
>
>
Guest
Posts: n/a
Re: nutter by pass for 89 yj
ha their dyno hard drive broke going in on Monday now.
they did acknowledge that the emission standard for a 4.0L and 4.2L is
different so I get a free redo on my first test
"Snow" <snowbal@sympatico.ca> wrote in message
news:ZF6ae.20708$Jg5.1117403@news20.bellglobal.com ...
> How did the re-test go?
>
> Snow...
>
> "u know who" <wraithyneon@sympatico.ca> wrote in message
> news:%c6ae.9121$9G.694132@news20.bellglobal.com...
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
>>
>
>
they did acknowledge that the emission standard for a 4.0L and 4.2L is
different so I get a free redo on my first test
"Snow" <snowbal@sympatico.ca> wrote in message
news:ZF6ae.20708$Jg5.1117403@news20.bellglobal.com ...
> How did the re-test go?
>
> Snow...
>
> "u know who" <wraithyneon@sympatico.ca> wrote in message
> news:%c6ae.9121$9G.694132@news20.bellglobal.com...
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
>>
>
>
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Yep at your recommendation that's what I did, and it took all of
what......2min?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
>I think the best is to just add 2 new wires so you don't have to mess
> around inside the wiring harness.
>
> You should read the thread on Jeep CJ 258 acceleration issues.
>
> Here are a couple good links on tweaking the 258's:
>
> http://www.off-road.com/jeep/jnutter1.htm
>
> http://home.sprynet.com/~dale02/ignmods.htm
>
> And before you attempt to mess with the mix, the mix must work so here
> is a good link on that:
>
> http://www.off-road.com/jeep/tech/engine/carter.html
>
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
>
> When you set the mix, you need to turn the screws 1/4 at a time with a
> rev between each turn. When it starts to miss, back them out 1/4 turn
> or just until the burble goes away. The 'sniffer' likes a slight
> burble.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> u know who wrote:
>>
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by
>> pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the
>> newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
what......2min?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
>I think the best is to just add 2 new wires so you don't have to mess
> around inside the wiring harness.
>
> You should read the thread on Jeep CJ 258 acceleration issues.
>
> Here are a couple good links on tweaking the 258's:
>
> http://www.off-road.com/jeep/jnutter1.htm
>
> http://home.sprynet.com/~dale02/ignmods.htm
>
> And before you attempt to mess with the mix, the mix must work so here
> is a good link on that:
>
> http://www.off-road.com/jeep/tech/engine/carter.html
>
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
>
> When you set the mix, you need to turn the screws 1/4 at a time with a
> rev between each turn. When it starts to miss, back them out 1/4 turn
> or just until the burble goes away. The 'sniffer' likes a slight
> burble.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> u know who wrote:
>>
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by
>> pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the
>> newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Yep at your recommendation that's what I did, and it took all of
what......2min?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
>I think the best is to just add 2 new wires so you don't have to mess
> around inside the wiring harness.
>
> You should read the thread on Jeep CJ 258 acceleration issues.
>
> Here are a couple good links on tweaking the 258's:
>
> http://www.off-road.com/jeep/jnutter1.htm
>
> http://home.sprynet.com/~dale02/ignmods.htm
>
> And before you attempt to mess with the mix, the mix must work so here
> is a good link on that:
>
> http://www.off-road.com/jeep/tech/engine/carter.html
>
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
>
> When you set the mix, you need to turn the screws 1/4 at a time with a
> rev between each turn. When it starts to miss, back them out 1/4 turn
> or just until the burble goes away. The 'sniffer' likes a slight
> burble.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> u know who wrote:
>>
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by
>> pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the
>> newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
what......2min?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
>I think the best is to just add 2 new wires so you don't have to mess
> around inside the wiring harness.
>
> You should read the thread on Jeep CJ 258 acceleration issues.
>
> Here are a couple good links on tweaking the 258's:
>
> http://www.off-road.com/jeep/jnutter1.htm
>
> http://home.sprynet.com/~dale02/ignmods.htm
>
> And before you attempt to mess with the mix, the mix must work so here
> is a good link on that:
>
> http://www.off-road.com/jeep/tech/engine/carter.html
>
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
>
> When you set the mix, you need to turn the screws 1/4 at a time with a
> rev between each turn. When it starts to miss, back them out 1/4 turn
> or just until the burble goes away. The 'sniffer' likes a slight
> burble.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> u know who wrote:
>>
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by
>> pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the
>> newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Yep at your recommendation that's what I did, and it took all of
what......2min?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
>I think the best is to just add 2 new wires so you don't have to mess
> around inside the wiring harness.
>
> You should read the thread on Jeep CJ 258 acceleration issues.
>
> Here are a couple good links on tweaking the 258's:
>
> http://www.off-road.com/jeep/jnutter1.htm
>
> http://home.sprynet.com/~dale02/ignmods.htm
>
> And before you attempt to mess with the mix, the mix must work so here
> is a good link on that:
>
> http://www.off-road.com/jeep/tech/engine/carter.html
>
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
>
> When you set the mix, you need to turn the screws 1/4 at a time with a
> rev between each turn. When it starts to miss, back them out 1/4 turn
> or just until the burble goes away. The 'sniffer' likes a slight
> burble.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> u know who wrote:
>>
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by
>> pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the
>> newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
what......2min?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
>I think the best is to just add 2 new wires so you don't have to mess
> around inside the wiring harness.
>
> You should read the thread on Jeep CJ 258 acceleration issues.
>
> Here are a couple good links on tweaking the 258's:
>
> http://www.off-road.com/jeep/jnutter1.htm
>
> http://home.sprynet.com/~dale02/ignmods.htm
>
> And before you attempt to mess with the mix, the mix must work so here
> is a good link on that:
>
> http://www.off-road.com/jeep/tech/engine/carter.html
>
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
>
> When you set the mix, you need to turn the screws 1/4 at a time with a
> rev between each turn. When it starts to miss, back them out 1/4 turn
> or just until the burble goes away. The 'sniffer' likes a slight
> burble.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> u know who wrote:
>>
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by
>> pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the
>> newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
