nutter by pass for 89 yj
#21
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Yep at your recommendation that's what I did, and it took all of
what......2min?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
>I think the best is to just add 2 new wires so you don't have to mess
> around inside the wiring harness.
>
> You should read the thread on Jeep CJ 258 acceleration issues.
>
> Here are a couple good links on tweaking the 258's:
>
> http://www.off-road.com/jeep/jnutter1.htm
>
> http://home.sprynet.com/~dale02/ignmods.htm
>
> And before you attempt to mess with the mix, the mix must work so here
> is a good link on that:
>
> http://www.off-road.com/jeep/tech/engine/carter.html
>
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
>
> When you set the mix, you need to turn the screws 1/4 at a time with a
> rev between each turn. When it starts to miss, back them out 1/4 turn
> or just until the burble goes away. The 'sniffer' likes a slight
> burble.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> u know who wrote:
>>
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by
>> pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the
>> newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
what......2min?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
>I think the best is to just add 2 new wires so you don't have to mess
> around inside the wiring harness.
>
> You should read the thread on Jeep CJ 258 acceleration issues.
>
> Here are a couple good links on tweaking the 258's:
>
> http://www.off-road.com/jeep/jnutter1.htm
>
> http://home.sprynet.com/~dale02/ignmods.htm
>
> And before you attempt to mess with the mix, the mix must work so here
> is a good link on that:
>
> http://www.off-road.com/jeep/tech/engine/carter.html
>
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
>
> When you set the mix, you need to turn the screws 1/4 at a time with a
> rev between each turn. When it starts to miss, back them out 1/4 turn
> or just until the burble goes away. The 'sniffer' likes a slight
> burble.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> u know who wrote:
>>
>> couple of questions does anyone have the how to for an 87 and up nutter
>> by
>> pass.
>> as I understand there is a colour difference in the wiring somewhere.
>> can someone give me the modified protocol for the wiring bypass using a
>> the
>> newer wire colours for an 87 and on.
>> and how much do I turn in the idle mix screws
>> just until it starts to miss?
>> Thanx to all.
>> Scott
#22
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Who/What/Where is 'CT'?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
#23
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Who/What/Where is 'CT'?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
#24
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Who/What/Where is 'CT'?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
#25
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Who/What/Where is 'CT'?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4268FA72.5C21241F@sympatico.ca...
> Before you start, a carb kit is only about $20.00 at CT and is easy to
> put in. You really need that carb working or it will 'never' set
> stable.
#26
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Ahh, Canadian Tire Store up here in Canada. The OP (original poster) is
Canadian eh.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Steve Foley wrote:
>
> Who/What/Where is 'CT'?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4268FA72.5C21241F@sympatico.ca...
>
> > Before you start, a carb kit is only about $20.00 at CT and is easy to
> > put in. You really need that carb working or it will 'never' set
> > stable.
Canadian eh.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Steve Foley wrote:
>
> Who/What/Where is 'CT'?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4268FA72.5C21241F@sympatico.ca...
>
> > Before you start, a carb kit is only about $20.00 at CT and is easy to
> > put in. You really need that carb working or it will 'never' set
> > stable.
#27
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Ahh, Canadian Tire Store up here in Canada. The OP (original poster) is
Canadian eh.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Steve Foley wrote:
>
> Who/What/Where is 'CT'?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4268FA72.5C21241F@sympatico.ca...
>
> > Before you start, a carb kit is only about $20.00 at CT and is easy to
> > put in. You really need that carb working or it will 'never' set
> > stable.
Canadian eh.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Steve Foley wrote:
>
> Who/What/Where is 'CT'?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4268FA72.5C21241F@sympatico.ca...
>
> > Before you start, a carb kit is only about $20.00 at CT and is easy to
> > put in. You really need that carb working or it will 'never' set
> > stable.
#28
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Ahh, Canadian Tire Store up here in Canada. The OP (original poster) is
Canadian eh.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Steve Foley wrote:
>
> Who/What/Where is 'CT'?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4268FA72.5C21241F@sympatico.ca...
>
> > Before you start, a carb kit is only about $20.00 at CT and is easy to
> > put in. You really need that carb working or it will 'never' set
> > stable.
Canadian eh.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Steve Foley wrote:
>
> Who/What/Where is 'CT'?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4268FA72.5C21241F@sympatico.ca...
>
> > Before you start, a carb kit is only about $20.00 at CT and is easy to
> > put in. You really need that carb working or it will 'never' set
> > stable.
#29
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Ahh, Canadian Tire Store up here in Canada. The OP (original poster) is
Canadian eh.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Steve Foley wrote:
>
> Who/What/Where is 'CT'?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4268FA72.5C21241F@sympatico.ca...
>
> > Before you start, a carb kit is only about $20.00 at CT and is easy to
> > put in. You really need that carb working or it will 'never' set
> > stable.
Canadian eh.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Steve Foley wrote:
>
> Who/What/Where is 'CT'?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4268FA72.5C21241F@sympatico.ca...
>
> > Before you start, a carb kit is only about $20.00 at CT and is easy to
> > put in. You really need that carb working or it will 'never' set
> > stable.
#30
Guest
Posts: n/a
Re: nutter by pass for 89 yj
Canadian Tire
"Steve Foley" <steve.foley@DELETE.att.net> wrote in message
news:JN8ae.8$Nc.1@trnddc03...
> Who/What/Where is 'CT'?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4268FA72.5C21241F@sympatico.ca...
>
>
>> Before you start, a carb kit is only about $20.00 at CT and is easy to
>> put in. You really need that carb working or it will 'never' set
>> stable.
>
>
"Steve Foley" <steve.foley@DELETE.att.net> wrote in message
news:JN8ae.8$Nc.1@trnddc03...
> Who/What/Where is 'CT'?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4268FA72.5C21241F@sympatico.ca...
>
>
>> Before you start, a carb kit is only about $20.00 at CT and is easy to
>> put in. You really need that carb working or it will 'never' set
>> stable.
>
>