Re: Not a poser!
Lookin good! One heck of a project you got going there.
My ProRock60 front finally arrived and I just got it all put together with a heavy-duty hi-steer setup this past weekend. I'm running dual ProRock60s now w/ 5.13s and dual Detoit lockers. My next project (when I get the cash) is to replace the steering box/pump, then perhaps an Atlas II. I'm interested to know your opinion on those revolver shackles. I own a set, had them on for a while, but took them off with the last suspension mod I made. They sure added droop, but I'm reluctant to put them back on at the moment because I've heard bad stuff about their performance on SOA rigs while climbing steep inclines (I'm still SUA). Many say they open up like alligator jaws on the steep inclines (and/or declines) when they aren't suppose to, often causing climbing difficulties and even causing driveshafts to break. I've only heard this from the SOA crowd. SUA rigs seem to have no such problems. Go to Pirates4x4.com and do a search and you will see what I mean. Put'em to the test on a steep incline and let me know what happens :). Besides, I would think a rig would have plenty of articulation already with a good set of springie leafs and SOA. Terry 92YJ "Cal Wheeler" <cal@whee.ler> wrote in message news:bp9n3h$6ni$0@pita.alt.net... > After another extensive bunch of upgrades, I hit the trail this weekend > with a local Jeep club full of friendly and helpful folks. Not the most > intense trails, but a good variety of terrain to test out the latest > mods on my '94 YJ: > > 37x12.5" SuperSwampers > > Dynatrac ProRock60 Rear w/ 5.13s > > Dynatrac 44 Front > > Teraflex Revolver shackles on all four corners > > *Individual air springs on each corner* (These will lift any corner > 4.5"! They reaaaaalllly cush out the bounces and jounces this ride used > to have) > > Re-fabbed (3rd time!) Tire/Jerry Can carrier (had to mod to fit the: > > Hardtop (getting chillier; it was 42 degrees and blowing hard this > morning...no upper doors that fit yet!) > > Borla Headers > > Borla Stainless CatBack > > Under hood "snorkle" (moved airflow entry point up about 10" with PVC > elbow and Dryer ducting) > > Here's a particularly interesting little sluice: > > http://pages.sbcglobal.net/calwheeler/vnotch.html > > I'm hungry for more! > |
Re: Not a poser!
Lookin good! One heck of a project you got going there.
My ProRock60 front finally arrived and I just got it all put together with a heavy-duty hi-steer setup this past weekend. I'm running dual ProRock60s now w/ 5.13s and dual Detoit lockers. My next project (when I get the cash) is to replace the steering box/pump, then perhaps an Atlas II. I'm interested to know your opinion on those revolver shackles. I own a set, had them on for a while, but took them off with the last suspension mod I made. They sure added droop, but I'm reluctant to put them back on at the moment because I've heard bad stuff about their performance on SOA rigs while climbing steep inclines (I'm still SUA). Many say they open up like alligator jaws on the steep inclines (and/or declines) when they aren't suppose to, often causing climbing difficulties and even causing driveshafts to break. I've only heard this from the SOA crowd. SUA rigs seem to have no such problems. Go to Pirates4x4.com and do a search and you will see what I mean. Put'em to the test on a steep incline and let me know what happens :). Besides, I would think a rig would have plenty of articulation already with a good set of springie leafs and SOA. Terry 92YJ "Cal Wheeler" <cal@whee.ler> wrote in message news:bp9n3h$6ni$0@pita.alt.net... > After another extensive bunch of upgrades, I hit the trail this weekend > with a local Jeep club full of friendly and helpful folks. Not the most > intense trails, but a good variety of terrain to test out the latest > mods on my '94 YJ: > > 37x12.5" SuperSwampers > > Dynatrac ProRock60 Rear w/ 5.13s > > Dynatrac 44 Front > > Teraflex Revolver shackles on all four corners > > *Individual air springs on each corner* (These will lift any corner > 4.5"! They reaaaaalllly cush out the bounces and jounces this ride used > to have) > > Re-fabbed (3rd time!) Tire/Jerry Can carrier (had to mod to fit the: > > Hardtop (getting chillier; it was 42 degrees and blowing hard this > morning...no upper doors that fit yet!) > > Borla Headers > > Borla Stainless CatBack > > Under hood "snorkle" (moved airflow entry point up about 10" with PVC > elbow and Dryer ducting) > > Here's a particularly interesting little sluice: > > http://pages.sbcglobal.net/calwheeler/vnotch.html > > I'm hungry for more! > |
Re: Not a poser!
Lookin good! One heck of a project you got going there.
My ProRock60 front finally arrived and I just got it all put together with a heavy-duty hi-steer setup this past weekend. I'm running dual ProRock60s now w/ 5.13s and dual Detoit lockers. My next project (when I get the cash) is to replace the steering box/pump, then perhaps an Atlas II. I'm interested to know your opinion on those revolver shackles. I own a set, had them on for a while, but took them off with the last suspension mod I made. They sure added droop, but I'm reluctant to put them back on at the moment because I've heard bad stuff about their performance on SOA rigs while climbing steep inclines (I'm still SUA). Many say they open up like alligator jaws on the steep inclines (and/or declines) when they aren't suppose to, often causing climbing difficulties and even causing driveshafts to break. I've only heard this from the SOA crowd. SUA rigs seem to have no such problems. Go to Pirates4x4.com and do a search and you will see what I mean. Put'em to the test on a steep incline and let me know what happens :). Besides, I would think a rig would have plenty of articulation already with a good set of springie leafs and SOA. Terry 92YJ "Cal Wheeler" <cal@whee.ler> wrote in message news:bp9n3h$6ni$0@pita.alt.net... > After another extensive bunch of upgrades, I hit the trail this weekend > with a local Jeep club full of friendly and helpful folks. Not the most > intense trails, but a good variety of terrain to test out the latest > mods on my '94 YJ: > > 37x12.5" SuperSwampers > > Dynatrac ProRock60 Rear w/ 5.13s > > Dynatrac 44 Front > > Teraflex Revolver shackles on all four corners > > *Individual air springs on each corner* (These will lift any corner > 4.5"! They reaaaaalllly cush out the bounces and jounces this ride used > to have) > > Re-fabbed (3rd time!) Tire/Jerry Can carrier (had to mod to fit the: > > Hardtop (getting chillier; it was 42 degrees and blowing hard this > morning...no upper doors that fit yet!) > > Borla Headers > > Borla Stainless CatBack > > Under hood "snorkle" (moved airflow entry point up about 10" with PVC > elbow and Dryer ducting) > > Here's a particularly interesting little sluice: > > http://pages.sbcglobal.net/calwheeler/vnotch.html > > I'm hungry for more! > |
Re: Not a poser!
Terry Jeffrey wrote:
> Lookin good! One heck of a project you got going there. Thanks! > > My ProRock60 front finally arrived and I just got it all put together with a > heavy-duty hi-steer setup this past weekend. I'm running dual ProRock60s > now w/ 5.13s and dual Detoit lockers. Dual 60's. Hard Core! And beaucoup dollares! > My next project (when I get the cash) > is to replace the steering box/pump, then perhaps an Atlas II. Yeah, sounds nice. What size tires you looking to swing? > > I'm interested to know your opinion on those revolver shackles. I own a > set, had them on for a while, but took them off with the last suspension mod > I made. They sure added droop, but I'm reluctant to put them back on at the > moment because I've heard bad stuff about their performance on SOA rigs > while climbing steep inclines (I'm still SUA). But did you yourself experience any bad performance from them? > Many say they open up like > alligator jaws on the steep inclines (and/or declines) when they aren't > suppose to, Heh. They add 6 inches of travel or so. If I am ever climbing/descending something so steep that another 6 inches tumbles me over, I'll count it as a learning experience and pop 'em off. ;-) >often causing climbing difficulties and even causing driveshafts > to break. Yeah, but MY driveshafts are Tom Woods ones made from Super Unbreakatanium! I've only heard this from the SOA crowd. That Pirate group seems to have a mob mentality about 'em, for some odd reason. I have zero problem with body roll and axle wrap with the Revolvers. > SUA rigs seem to have > no such problems. Go to Pirates4x4.com and do a search and you will see > what I mean. I did. Separating the wheat from the chaff, it mostly comes down to a matter of personal preference, and I haven't yet experienced any of the problems some of those dudes are talking about. > Put'em to the test on a steep incline and let me know what > happens :). I did this weekend. There was one pretty steep ascent that required a moderate amount of articulation, on which I had absolutely no problems, but it wasn't very sustained. I'll try it out in Rowher Flats soon, which is known for some longer steep trails, and report back. > Besides, I would think a rig would have plenty of articulation > already with a good set of springie leafs and SOA. Too much is never enough! They were the first thing I put on, before the SOA. What can I say, I like having all four wheels on the ground as much as possible. And they don't just drop loose, like some of the physics experts on the Pirate boards think. It actually takes a lot of force to fully extend them, and they wouldn't be drooping/stuffing if they weren't conforming to the terrain. I haven't noticed the lack of traction some say is supposed to happen. On the other hand, I haven't given it a true acid test yet. I'll be on the lookout for alligators! > > Terry > 92YJ > > > "Cal Wheeler" <cal@whee.ler> wrote in message > news:bp9n3h$6ni$0@pita.alt.net... > >>After another extensive bunch of upgrades, I hit the trail this weekend >>with a local Jeep club full of friendly and helpful folks. Not the most >>intense trails, but a good variety of terrain to test out the latest >>mods on my '94 YJ: >> >>37x12.5" SuperSwampers >> >>Dynatrac ProRock60 Rear w/ 5.13s >> >>Dynatrac 44 Front >> >>Teraflex Revolver shackles on all four corners >> >>*Individual air springs on each corner* (These will lift any corner >>4.5"! They reaaaaalllly cush out the bounces and jounces this ride used >>to have) >> >>Re-fabbed (3rd time!) Tire/Jerry Can carrier (had to mod to fit the: >> >>Hardtop (getting chillier; it was 42 degrees and blowing hard this >>morning...no upper doors that fit yet!) >> >>Borla Headers >> >>Borla Stainless CatBack >> >>Under hood "snorkle" (moved airflow entry point up about 10" with PVC >>elbow and Dryer ducting) >> >>Here's a particularly interesting little sluice: >> >>http://pages.sbcglobal.net/calwheeler/vnotch.html >> >>I'm hungry for more! >> > > > |
Re: Not a poser!
Terry Jeffrey wrote:
> Lookin good! One heck of a project you got going there. Thanks! > > My ProRock60 front finally arrived and I just got it all put together with a > heavy-duty hi-steer setup this past weekend. I'm running dual ProRock60s > now w/ 5.13s and dual Detoit lockers. Dual 60's. Hard Core! And beaucoup dollares! > My next project (when I get the cash) > is to replace the steering box/pump, then perhaps an Atlas II. Yeah, sounds nice. What size tires you looking to swing? > > I'm interested to know your opinion on those revolver shackles. I own a > set, had them on for a while, but took them off with the last suspension mod > I made. They sure added droop, but I'm reluctant to put them back on at the > moment because I've heard bad stuff about their performance on SOA rigs > while climbing steep inclines (I'm still SUA). But did you yourself experience any bad performance from them? > Many say they open up like > alligator jaws on the steep inclines (and/or declines) when they aren't > suppose to, Heh. They add 6 inches of travel or so. If I am ever climbing/descending something so steep that another 6 inches tumbles me over, I'll count it as a learning experience and pop 'em off. ;-) >often causing climbing difficulties and even causing driveshafts > to break. Yeah, but MY driveshafts are Tom Woods ones made from Super Unbreakatanium! I've only heard this from the SOA crowd. That Pirate group seems to have a mob mentality about 'em, for some odd reason. I have zero problem with body roll and axle wrap with the Revolvers. > SUA rigs seem to have > no such problems. Go to Pirates4x4.com and do a search and you will see > what I mean. I did. Separating the wheat from the chaff, it mostly comes down to a matter of personal preference, and I haven't yet experienced any of the problems some of those dudes are talking about. > Put'em to the test on a steep incline and let me know what > happens :). I did this weekend. There was one pretty steep ascent that required a moderate amount of articulation, on which I had absolutely no problems, but it wasn't very sustained. I'll try it out in Rowher Flats soon, which is known for some longer steep trails, and report back. > Besides, I would think a rig would have plenty of articulation > already with a good set of springie leafs and SOA. Too much is never enough! They were the first thing I put on, before the SOA. What can I say, I like having all four wheels on the ground as much as possible. And they don't just drop loose, like some of the physics experts on the Pirate boards think. It actually takes a lot of force to fully extend them, and they wouldn't be drooping/stuffing if they weren't conforming to the terrain. I haven't noticed the lack of traction some say is supposed to happen. On the other hand, I haven't given it a true acid test yet. I'll be on the lookout for alligators! > > Terry > 92YJ > > > "Cal Wheeler" <cal@whee.ler> wrote in message > news:bp9n3h$6ni$0@pita.alt.net... > >>After another extensive bunch of upgrades, I hit the trail this weekend >>with a local Jeep club full of friendly and helpful folks. Not the most >>intense trails, but a good variety of terrain to test out the latest >>mods on my '94 YJ: >> >>37x12.5" SuperSwampers >> >>Dynatrac ProRock60 Rear w/ 5.13s >> >>Dynatrac 44 Front >> >>Teraflex Revolver shackles on all four corners >> >>*Individual air springs on each corner* (These will lift any corner >>4.5"! They reaaaaalllly cush out the bounces and jounces this ride used >>to have) >> >>Re-fabbed (3rd time!) Tire/Jerry Can carrier (had to mod to fit the: >> >>Hardtop (getting chillier; it was 42 degrees and blowing hard this >>morning...no upper doors that fit yet!) >> >>Borla Headers >> >>Borla Stainless CatBack >> >>Under hood "snorkle" (moved airflow entry point up about 10" with PVC >>elbow and Dryer ducting) >> >>Here's a particularly interesting little sluice: >> >>http://pages.sbcglobal.net/calwheeler/vnotch.html >> >>I'm hungry for more! >> > > > |
Re: Not a poser!
Terry Jeffrey wrote:
> Lookin good! One heck of a project you got going there. Thanks! > > My ProRock60 front finally arrived and I just got it all put together with a > heavy-duty hi-steer setup this past weekend. I'm running dual ProRock60s > now w/ 5.13s and dual Detoit lockers. Dual 60's. Hard Core! And beaucoup dollares! > My next project (when I get the cash) > is to replace the steering box/pump, then perhaps an Atlas II. Yeah, sounds nice. What size tires you looking to swing? > > I'm interested to know your opinion on those revolver shackles. I own a > set, had them on for a while, but took them off with the last suspension mod > I made. They sure added droop, but I'm reluctant to put them back on at the > moment because I've heard bad stuff about their performance on SOA rigs > while climbing steep inclines (I'm still SUA). But did you yourself experience any bad performance from them? > Many say they open up like > alligator jaws on the steep inclines (and/or declines) when they aren't > suppose to, Heh. They add 6 inches of travel or so. If I am ever climbing/descending something so steep that another 6 inches tumbles me over, I'll count it as a learning experience and pop 'em off. ;-) >often causing climbing difficulties and even causing driveshafts > to break. Yeah, but MY driveshafts are Tom Woods ones made from Super Unbreakatanium! I've only heard this from the SOA crowd. That Pirate group seems to have a mob mentality about 'em, for some odd reason. I have zero problem with body roll and axle wrap with the Revolvers. > SUA rigs seem to have > no such problems. Go to Pirates4x4.com and do a search and you will see > what I mean. I did. Separating the wheat from the chaff, it mostly comes down to a matter of personal preference, and I haven't yet experienced any of the problems some of those dudes are talking about. > Put'em to the test on a steep incline and let me know what > happens :). I did this weekend. There was one pretty steep ascent that required a moderate amount of articulation, on which I had absolutely no problems, but it wasn't very sustained. I'll try it out in Rowher Flats soon, which is known for some longer steep trails, and report back. > Besides, I would think a rig would have plenty of articulation > already with a good set of springie leafs and SOA. Too much is never enough! They were the first thing I put on, before the SOA. What can I say, I like having all four wheels on the ground as much as possible. And they don't just drop loose, like some of the physics experts on the Pirate boards think. It actually takes a lot of force to fully extend them, and they wouldn't be drooping/stuffing if they weren't conforming to the terrain. I haven't noticed the lack of traction some say is supposed to happen. On the other hand, I haven't given it a true acid test yet. I'll be on the lookout for alligators! > > Terry > 92YJ > > > "Cal Wheeler" <cal@whee.ler> wrote in message > news:bp9n3h$6ni$0@pita.alt.net... > >>After another extensive bunch of upgrades, I hit the trail this weekend >>with a local Jeep club full of friendly and helpful folks. Not the most >>intense trails, but a good variety of terrain to test out the latest >>mods on my '94 YJ: >> >>37x12.5" SuperSwampers >> >>Dynatrac ProRock60 Rear w/ 5.13s >> >>Dynatrac 44 Front >> >>Teraflex Revolver shackles on all four corners >> >>*Individual air springs on each corner* (These will lift any corner >>4.5"! They reaaaaalllly cush out the bounces and jounces this ride used >>to have) >> >>Re-fabbed (3rd time!) Tire/Jerry Can carrier (had to mod to fit the: >> >>Hardtop (getting chillier; it was 42 degrees and blowing hard this >>morning...no upper doors that fit yet!) >> >>Borla Headers >> >>Borla Stainless CatBack >> >>Under hood "snorkle" (moved airflow entry point up about 10" with PVC >>elbow and Dryer ducting) >> >>Here's a particularly interesting little sluice: >> >>http://pages.sbcglobal.net/calwheeler/vnotch.html >> >>I'm hungry for more! >> > > > |
Re: Not a poser!
> Dual 60's. Hard Core! And beaucoup dollares!
Yep, not cheap that is for sure. That's why I only make one major mod a year. > Yeah, sounds nice. What size tires you looking to swing? Swingin 35" right now, but may step up to 37" and go SOA next spring. > But did you yourself experience any bad performance from them? Not I didn't experience any bad performance with them, but never really put them to the test since I lived in a place then that had extremely limited wheeling opportunities. I may slip them back on eventually. > Yeah, but MY driveshafts are Tom Woods ones made from Super Unbreakatanium! Tom makes good stuff. This time, however, for the front driveshaft I went with High Angle Driveline: http://www.highangledriveline.com They came highly recommended by Dynatrac and some rock-crawlin crowds, and advertise higher angles than Tom Woods with the 1350 u-joints and yokes. It costs a few bucks more, but this friggin driveshaft is MASSIVE! When I opened the package my first response was "holy sh*t!!" The tube is 3" wide from the t-case down to the boot. > That Pirate group seems to have a mob mentality about 'em, for some odd > reason. I have zero problem with body roll and axle wrap with the > Revolvers. You are right. That is why I don't hang out there often. Too many loud mouths there for me. > I'll try it out in Rowher Flats soon, which is known for some longer > steep trails, and report back. Sounds good. I may go SOA myself soon. What springs & lift are you using? > Too much is never enough! They were the first thing I put on, before the > SOA. What can I say, I like having all four wheels on the ground as much > as possible. And they don't just drop loose, like some of the physics > experts on the Pirate boards think. It actually takes a lot of force to > fully extend them, and they wouldn't be drooping/stuffing if they > weren't conforming to the terrain. I haven't noticed the lack of > traction some say is supposed to happen. Yup, just be sure to make the other necessary mods that some folks neglect like longer extending driveshaft, longer brake lines, etc. > On the other hand, I haven't given it a true acid test yet. I'll be on > the lookout for alligators! Good luck to ya! Maybe we'll meet on the trails one day! Terry. |
Re: Not a poser!
> Dual 60's. Hard Core! And beaucoup dollares!
Yep, not cheap that is for sure. That's why I only make one major mod a year. > Yeah, sounds nice. What size tires you looking to swing? Swingin 35" right now, but may step up to 37" and go SOA next spring. > But did you yourself experience any bad performance from them? Not I didn't experience any bad performance with them, but never really put them to the test since I lived in a place then that had extremely limited wheeling opportunities. I may slip them back on eventually. > Yeah, but MY driveshafts are Tom Woods ones made from Super Unbreakatanium! Tom makes good stuff. This time, however, for the front driveshaft I went with High Angle Driveline: http://www.highangledriveline.com They came highly recommended by Dynatrac and some rock-crawlin crowds, and advertise higher angles than Tom Woods with the 1350 u-joints and yokes. It costs a few bucks more, but this friggin driveshaft is MASSIVE! When I opened the package my first response was "holy sh*t!!" The tube is 3" wide from the t-case down to the boot. > That Pirate group seems to have a mob mentality about 'em, for some odd > reason. I have zero problem with body roll and axle wrap with the > Revolvers. You are right. That is why I don't hang out there often. Too many loud mouths there for me. > I'll try it out in Rowher Flats soon, which is known for some longer > steep trails, and report back. Sounds good. I may go SOA myself soon. What springs & lift are you using? > Too much is never enough! They were the first thing I put on, before the > SOA. What can I say, I like having all four wheels on the ground as much > as possible. And they don't just drop loose, like some of the physics > experts on the Pirate boards think. It actually takes a lot of force to > fully extend them, and they wouldn't be drooping/stuffing if they > weren't conforming to the terrain. I haven't noticed the lack of > traction some say is supposed to happen. Yup, just be sure to make the other necessary mods that some folks neglect like longer extending driveshaft, longer brake lines, etc. > On the other hand, I haven't given it a true acid test yet. I'll be on > the lookout for alligators! Good luck to ya! Maybe we'll meet on the trails one day! Terry. |
Re: Not a poser!
> Dual 60's. Hard Core! And beaucoup dollares!
Yep, not cheap that is for sure. That's why I only make one major mod a year. > Yeah, sounds nice. What size tires you looking to swing? Swingin 35" right now, but may step up to 37" and go SOA next spring. > But did you yourself experience any bad performance from them? Not I didn't experience any bad performance with them, but never really put them to the test since I lived in a place then that had extremely limited wheeling opportunities. I may slip them back on eventually. > Yeah, but MY driveshafts are Tom Woods ones made from Super Unbreakatanium! Tom makes good stuff. This time, however, for the front driveshaft I went with High Angle Driveline: http://www.highangledriveline.com They came highly recommended by Dynatrac and some rock-crawlin crowds, and advertise higher angles than Tom Woods with the 1350 u-joints and yokes. It costs a few bucks more, but this friggin driveshaft is MASSIVE! When I opened the package my first response was "holy sh*t!!" The tube is 3" wide from the t-case down to the boot. > That Pirate group seems to have a mob mentality about 'em, for some odd > reason. I have zero problem with body roll and axle wrap with the > Revolvers. You are right. That is why I don't hang out there often. Too many loud mouths there for me. > I'll try it out in Rowher Flats soon, which is known for some longer > steep trails, and report back. Sounds good. I may go SOA myself soon. What springs & lift are you using? > Too much is never enough! They were the first thing I put on, before the > SOA. What can I say, I like having all four wheels on the ground as much > as possible. And they don't just drop loose, like some of the physics > experts on the Pirate boards think. It actually takes a lot of force to > fully extend them, and they wouldn't be drooping/stuffing if they > weren't conforming to the terrain. I haven't noticed the lack of > traction some say is supposed to happen. Yup, just be sure to make the other necessary mods that some folks neglect like longer extending driveshaft, longer brake lines, etc. > On the other hand, I haven't given it a true acid test yet. I'll be on > the lookout for alligators! Good luck to ya! Maybe we'll meet on the trails one day! Terry. |
Re: Not a poser!
Hmmm...stumped on two new acronyms...SUA...SOA?????
What is wrong with me...I am not that new to wheelin.... ;) -- -- Joe Pribe NC jpribe 'at' nc.rr.com <you know the drill jegp 'at' hotmail.com < at is really @ ---- I Love My O|||||||O TJ "Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message news:plAub.6298$n56.3354@newsread1.news.pas.earthl ink.net... | > Dual 60's. Hard Core! And beaucoup dollares! | | Yep, not cheap that is for sure. That's why I only make one major mod a | year. | | > Yeah, sounds nice. What size tires you looking to swing? | | Swingin 35" right now, but may step up to 37" and go SOA next spring. | | > But did you yourself experience any bad performance from them? | | Not I didn't experience any bad performance with them, but never really put | them to the test since I lived in a place then that had extremely limited | wheeling opportunities. I may slip them back on eventually. | | > Yeah, but MY driveshafts are Tom Woods ones made from Super | Unbreakatanium! | | Tom makes good stuff. This time, however, for the front driveshaft I went | with High Angle Driveline: http://www.highangledriveline.com | They came highly recommended by Dynatrac and some rock-crawlin crowds, and | advertise higher angles than Tom Woods with the 1350 u-joints and yokes. It | costs a few bucks more, but this friggin driveshaft is MASSIVE! When I | opened the package my first response was "holy sh*t!!" The tube is 3" wide | from the t-case down to the boot. | | > That Pirate group seems to have a mob mentality about 'em, for some odd | > reason. I have zero problem with body roll and axle wrap with the | > Revolvers. | | You are right. That is why I don't hang out there often. Too many loud | mouths there for me. | | > I'll try it out in Rowher Flats soon, which is known for some longer | > steep trails, and report back. | | Sounds good. I may go SOA myself soon. What springs & lift are you using? | | > Too much is never enough! They were the first thing I put on, before the | > SOA. What can I say, I like having all four wheels on the ground as much | > as possible. And they don't just drop loose, like some of the physics | > experts on the Pirate boards think. It actually takes a lot of force to | > fully extend them, and they wouldn't be drooping/stuffing if they | > weren't conforming to the terrain. I haven't noticed the lack of | > traction some say is supposed to happen. | | Yup, just be sure to make the other necessary mods that some folks neglect | like longer extending driveshaft, longer brake lines, etc. | | > On the other hand, I haven't given it a true acid test yet. I'll be on | > the lookout for alligators! | | Good luck to ya! Maybe we'll meet on the trails one day! | | Terry. | | | | |
All times are GMT -4. The time now is 08:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands