Lifter noise...should I worry?
04-16-2005, 06:10 AM
#31
Guest
Posts: n/a
Re: Lifter noise...should I worry?
romainm@sympatico.ca (Mike Romain)wrote:
Different engines, one has a CCV that plugs, the other a PCV and
canister._________________________________________ ____________________
Well I found the canister, that thing _is_ way down there isn't it?! I
still am unsure about the PCV valve looking thing behind the air
breather. I've looked all through my Haynes and the best thing I found
was a diagram saying "PCV air in". Now does this just get cleaned, or
replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
serious thought into this 'nutter' thing. I'm not concerned with NOx,
C3p0, R2D2, or any of it. Would just running without a CAT make any
difference? We have no emission testing here :) Dan
04-16-2005, 06:10 AM
#32
Guest
Posts: n/a
Re: Lifter noise...should I worry?
romainm@sympatico.ca (Mike Romain)wrote:
Different engines, one has a CCV that plugs, the other a PCV and
canister._________________________________________ ____________________
Well I found the canister, that thing _is_ way down there isn't it?! I
still am unsure about the PCV valve looking thing behind the air
breather. I've looked all through my Haynes and the best thing I found
was a diagram saying "PCV air in". Now does this just get cleaned, or
replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
serious thought into this 'nutter' thing. I'm not concerned with NOx,
C3p0, R2D2, or any of it. Would just running without a CAT make any
difference? We have no emission testing here :) Dan
04-16-2005, 06:10 AM
#33
Guest
Posts: n/a
Re: Lifter noise...should I worry?
romainm@sympatico.ca (Mike Romain)wrote:
Different engines, one has a CCV that plugs, the other a PCV and
canister._________________________________________ ____________________
Well I found the canister, that thing _is_ way down there isn't it?! I
still am unsure about the PCV valve looking thing behind the air
breather. I've looked all through my Haynes and the best thing I found
was a diagram saying "PCV air in". Now does this just get cleaned, or
replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
serious thought into this 'nutter' thing. I'm not concerned with NOx,
C3p0, R2D2, or any of it. Would just running without a CAT make any
difference? We have no emission testing here :) Dan
04-16-2005, 09:43 AM
#34
Guest
Posts: n/a
Re: Lifter noise...should I worry?
The PCV system has a fresh air in hose that goes to the rear of the
valve cover. It is just a big empty hose and fitting drawing fresh air
from the air filter.
If the cat has issues, it will run 'way' better without one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Daniel Paisley wrote:
>
>
> romainm@sympatico.ca (Mike Romain)wrote:
>
> Different engines, one has a CCV that plugs, the other a PCV and
> canister._________________________________________ ____________________
> Well I found the canister, that thing _is_ way down there isn't it?! I
> still am unsure about the PCV valve looking thing behind the air
> breather. I've looked all through my Haynes and the best thing I found
> was a diagram saying "PCV air in". Now does this just get cleaned, or
> replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
> serious thought into this 'nutter' thing. I'm not concerned with NOx,
> C3p0, R2D2, or any of it. Would just running without a CAT make any
> difference? We have no emission testing here :) Dan
>
>
valve cover. It is just a big empty hose and fitting drawing fresh air
from the air filter.
If the cat has issues, it will run 'way' better without one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Daniel Paisley wrote:
>
>
> romainm@sympatico.ca (Mike Romain)wrote:
>
> Different engines, one has a CCV that plugs, the other a PCV and
> canister._________________________________________ ____________________
> Well I found the canister, that thing _is_ way down there isn't it?! I
> still am unsure about the PCV valve looking thing behind the air
> breather. I've looked all through my Haynes and the best thing I found
> was a diagram saying "PCV air in". Now does this just get cleaned, or
> replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
> serious thought into this 'nutter' thing. I'm not concerned with NOx,
> C3p0, R2D2, or any of it. Would just running without a CAT make any
> difference? We have no emission testing here :) Dan
>
>
04-16-2005, 09:43 AM
#35
Guest
Posts: n/a
Re: Lifter noise...should I worry?
The PCV system has a fresh air in hose that goes to the rear of the
valve cover. It is just a big empty hose and fitting drawing fresh air
from the air filter.
If the cat has issues, it will run 'way' better without one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Daniel Paisley wrote:
>
>
> romainm@sympatico.ca (Mike Romain)wrote:
>
> Different engines, one has a CCV that plugs, the other a PCV and
> canister._________________________________________ ____________________
> Well I found the canister, that thing _is_ way down there isn't it?! I
> still am unsure about the PCV valve looking thing behind the air
> breather. I've looked all through my Haynes and the best thing I found
> was a diagram saying "PCV air in". Now does this just get cleaned, or
> replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
> serious thought into this 'nutter' thing. I'm not concerned with NOx,
> C3p0, R2D2, or any of it. Would just running without a CAT make any
> difference? We have no emission testing here :) Dan
>
>
valve cover. It is just a big empty hose and fitting drawing fresh air
from the air filter.
If the cat has issues, it will run 'way' better without one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Daniel Paisley wrote:
>
>
> romainm@sympatico.ca (Mike Romain)wrote:
>
> Different engines, one has a CCV that plugs, the other a PCV and
> canister._________________________________________ ____________________
> Well I found the canister, that thing _is_ way down there isn't it?! I
> still am unsure about the PCV valve looking thing behind the air
> breather. I've looked all through my Haynes and the best thing I found
> was a diagram saying "PCV air in". Now does this just get cleaned, or
> replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
> serious thought into this 'nutter' thing. I'm not concerned with NOx,
> C3p0, R2D2, or any of it. Would just running without a CAT make any
> difference? We have no emission testing here :) Dan
>
>
04-16-2005, 09:43 AM
#36
Guest
Posts: n/a
Re: Lifter noise...should I worry?
The PCV system has a fresh air in hose that goes to the rear of the
valve cover. It is just a big empty hose and fitting drawing fresh air
from the air filter.
If the cat has issues, it will run 'way' better without one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Daniel Paisley wrote:
>
>
> romainm@sympatico.ca (Mike Romain)wrote:
>
> Different engines, one has a CCV that plugs, the other a PCV and
> canister._________________________________________ ____________________
> Well I found the canister, that thing _is_ way down there isn't it?! I
> still am unsure about the PCV valve looking thing behind the air
> breather. I've looked all through my Haynes and the best thing I found
> was a diagram saying "PCV air in". Now does this just get cleaned, or
> replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
> serious thought into this 'nutter' thing. I'm not concerned with NOx,
> C3p0, R2D2, or any of it. Would just running without a CAT make any
> difference? We have no emission testing here :) Dan
>
>
valve cover. It is just a big empty hose and fitting drawing fresh air
from the air filter.
If the cat has issues, it will run 'way' better without one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Daniel Paisley wrote:
>
>
> romainm@sympatico.ca (Mike Romain)wrote:
>
> Different engines, one has a CCV that plugs, the other a PCV and
> canister._________________________________________ ____________________
> Well I found the canister, that thing _is_ way down there isn't it?! I
> still am unsure about the PCV valve looking thing behind the air
> breather. I've looked all through my Haynes and the best thing I found
> was a diagram saying "PCV air in". Now does this just get cleaned, or
> replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
> serious thought into this 'nutter' thing. I'm not concerned with NOx,
> C3p0, R2D2, or any of it. Would just running without a CAT make any
> difference? We have no emission testing here :) Dan
>
>
04-16-2005, 09:43 AM
#37
Guest
Posts: n/a
Re: Lifter noise...should I worry?
The PCV system has a fresh air in hose that goes to the rear of the
valve cover. It is just a big empty hose and fitting drawing fresh air
from the air filter.
If the cat has issues, it will run 'way' better without one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Daniel Paisley wrote:
>
>
> romainm@sympatico.ca (Mike Romain)wrote:
>
> Different engines, one has a CCV that plugs, the other a PCV and
> canister._________________________________________ ____________________
> Well I found the canister, that thing _is_ way down there isn't it?! I
> still am unsure about the PCV valve looking thing behind the air
> breather. I've looked all through my Haynes and the best thing I found
> was a diagram saying "PCV air in". Now does this just get cleaned, or
> replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
> serious thought into this 'nutter' thing. I'm not concerned with NOx,
> C3p0, R2D2, or any of it. Would just running without a CAT make any
> difference? We have no emission testing here :) Dan
>
>
valve cover. It is just a big empty hose and fitting drawing fresh air
from the air filter.
If the cat has issues, it will run 'way' better without one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Daniel Paisley wrote:
>
>
> romainm@sympatico.ca (Mike Romain)wrote:
>
> Different engines, one has a CCV that plugs, the other a PCV and
> canister._________________________________________ ____________________
> Well I found the canister, that thing _is_ way down there isn't it?! I
> still am unsure about the PCV valve looking thing behind the air
> breather. I've looked all through my Haynes and the best thing I found
> was a diagram saying "PCV air in". Now does this just get cleaned, or
> replaced? Tomorrow I'm doing the "pinch" test. I'm also putting some
> serious thought into this 'nutter' thing. I'm not concerned with NOx,
> C3p0, R2D2, or any of it. Would just running without a CAT make any
> difference? We have no emission testing here :) Dan
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)