Just had my engine dyno'd and air fuel ratio checked
#121
Guest
Posts: n/a
Re: Just had my engine dyno'd and air fuel ratio checked
I would be wanting to read the pulses on a scope. The pulse timing
shows if everything electrical is working. Like below, if 5 are short
and the last one is long or no pulse or pulsing at the wrong time, etc.
At the same time I would be wanting to see the spark strength.
I would then be watching the leak down very closely when shut off to
eliminate dirt holding an injector open.
Didn't you have carb issues before putting the injection on with
flooding?
Your damage could have happened then.
Mike
William Oliveri wrote:
>
> Also, if I want to make sure my injectors are performing correctly, what
> methodologies are used to test injectors? If I want to test injectors what
> kind of place should I contact to make sure they are working?
>
> You are giving me theories to the gas wash and it's helpful but you also
> know my state of understanding, please extend the information by letting me
> know what methodologies would provide a satisfactory result.
>
> Thanks,
>
> Bill
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:2hk8r0Fe0rd4U1@uni-berlin.de...
> > Mike
> > What would consist of a 'proper' dyno including the type of equipment
> > attached to the dyno. Educate me here.
> >
> > They have a Chassie dyno, is there other equipment that can be attach to a
> > chassie dyno which measures air/fuel ratio?
> >
> > Tell me for what to look for in a dyno reading. What should I make sure
> > they do?
> >
> > Thanks,
> >
> > Bill
> >
> >
> >
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40B4E4DC.7DFE43B7@sympatico.ca...
> > > Holy crap man!
> > >
> > > They can do 'anything' and are especially good at mix settings no matter
> > > the system!
> > >
> > > We will put it on our Dyno and get the air fuel 'just' right!
> > >
> > > With no machines in the freaking garage that can actually 'measure' the
> > > mix besides an emissions machine....
> > >
> > > Man oh man....
> > >
> > > Suffice it to say you didn't really get anything useful out of that
> > > because they couldn't even properly dyno it.....
> > >
> > > Now if you still had the Carter BBD on her, then these guys would likely
> > > have been spot on for mix.
> > >
> > > The problem with a tail pipe test on injection is the O2 can be seeing a
> > > nasty rich every 6th hit so it tells the injection to run full lean.
> > >
> > > So you have 5 cylinders running full lean with one still spitting black
> > > ---- at the O2 and the O2 will hold her lean.
> > >
> > > What comes out the tail pipe can still be just fine if the above
> > > balances....
> > >
> > > I would just be keeping an eye on my plugs.
> > >
> > > Mike
> > >
> > >
> > >
> > > William Oliveri wrote:
> > > >
> > > > I don't know Mike. I just know they have a shop (equivilant to 8 to
> 10
> > > > bays?) filled with muscle cars with experience back into the 60s.
> > > >
> > > > Here's the site:
> > > >
> > > > http://www.superiorautomotive.com/default.htm
> > > >
> > > > These people are not cheap either. Cost me 150.00 for the dyno with
> > > > Air/Fuel readings.
> > > >
> > > > It appears there's no one in Southern California who can do reliable
> > work or
> > > > I just have a knack for finding the bad ones?
> > > >
> > > > Bill
> > > >
> > > > > Bill, where do you find these people to keep taking your money?
> >
> >
shows if everything electrical is working. Like below, if 5 are short
and the last one is long or no pulse or pulsing at the wrong time, etc.
At the same time I would be wanting to see the spark strength.
I would then be watching the leak down very closely when shut off to
eliminate dirt holding an injector open.
Didn't you have carb issues before putting the injection on with
flooding?
Your damage could have happened then.
Mike
William Oliveri wrote:
>
> Also, if I want to make sure my injectors are performing correctly, what
> methodologies are used to test injectors? If I want to test injectors what
> kind of place should I contact to make sure they are working?
>
> You are giving me theories to the gas wash and it's helpful but you also
> know my state of understanding, please extend the information by letting me
> know what methodologies would provide a satisfactory result.
>
> Thanks,
>
> Bill
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:2hk8r0Fe0rd4U1@uni-berlin.de...
> > Mike
> > What would consist of a 'proper' dyno including the type of equipment
> > attached to the dyno. Educate me here.
> >
> > They have a Chassie dyno, is there other equipment that can be attach to a
> > chassie dyno which measures air/fuel ratio?
> >
> > Tell me for what to look for in a dyno reading. What should I make sure
> > they do?
> >
> > Thanks,
> >
> > Bill
> >
> >
> >
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40B4E4DC.7DFE43B7@sympatico.ca...
> > > Holy crap man!
> > >
> > > They can do 'anything' and are especially good at mix settings no matter
> > > the system!
> > >
> > > We will put it on our Dyno and get the air fuel 'just' right!
> > >
> > > With no machines in the freaking garage that can actually 'measure' the
> > > mix besides an emissions machine....
> > >
> > > Man oh man....
> > >
> > > Suffice it to say you didn't really get anything useful out of that
> > > because they couldn't even properly dyno it.....
> > >
> > > Now if you still had the Carter BBD on her, then these guys would likely
> > > have been spot on for mix.
> > >
> > > The problem with a tail pipe test on injection is the O2 can be seeing a
> > > nasty rich every 6th hit so it tells the injection to run full lean.
> > >
> > > So you have 5 cylinders running full lean with one still spitting black
> > > ---- at the O2 and the O2 will hold her lean.
> > >
> > > What comes out the tail pipe can still be just fine if the above
> > > balances....
> > >
> > > I would just be keeping an eye on my plugs.
> > >
> > > Mike
> > >
> > >
> > >
> > > William Oliveri wrote:
> > > >
> > > > I don't know Mike. I just know they have a shop (equivilant to 8 to
> 10
> > > > bays?) filled with muscle cars with experience back into the 60s.
> > > >
> > > > Here's the site:
> > > >
> > > > http://www.superiorautomotive.com/default.htm
> > > >
> > > > These people are not cheap either. Cost me 150.00 for the dyno with
> > > > Air/Fuel readings.
> > > >
> > > > It appears there's no one in Southern California who can do reliable
> > work or
> > > > I just have a knack for finding the bad ones?
> > > >
> > > > Bill
> > > >
> > > > > Bill, where do you find these people to keep taking your money?
> >
> >
#122
Guest
Posts: n/a
Re: Just had my engine dyno'd and air fuel ratio checked
Jeep stroker dyno test:
http://home.pacbell.net/jay_w007/dyno_sheet_text.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 4.2 block / 4.0 Head.
>
> Results: 124.9 Horsepower. I should have about 160, yes?
>
> Air/Fuel ratio came back a tad lean if anything.
>
> Engine has about 60 miles on it.
>
> Mechanic told me there's nothing wrong with the injectors.
>
> Bill
http://home.pacbell.net/jay_w007/dyno_sheet_text.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 4.2 block / 4.0 Head.
>
> Results: 124.9 Horsepower. I should have about 160, yes?
>
> Air/Fuel ratio came back a tad lean if anything.
>
> Engine has about 60 miles on it.
>
> Mechanic told me there's nothing wrong with the injectors.
>
> Bill
#123
Guest
Posts: n/a
Re: Just had my engine dyno'd and air fuel ratio checked
Jeep stroker dyno test:
http://home.pacbell.net/jay_w007/dyno_sheet_text.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 4.2 block / 4.0 Head.
>
> Results: 124.9 Horsepower. I should have about 160, yes?
>
> Air/Fuel ratio came back a tad lean if anything.
>
> Engine has about 60 miles on it.
>
> Mechanic told me there's nothing wrong with the injectors.
>
> Bill
http://home.pacbell.net/jay_w007/dyno_sheet_text.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 4.2 block / 4.0 Head.
>
> Results: 124.9 Horsepower. I should have about 160, yes?
>
> Air/Fuel ratio came back a tad lean if anything.
>
> Engine has about 60 miles on it.
>
> Mechanic told me there's nothing wrong with the injectors.
>
> Bill
#124
Guest
Posts: n/a
Re: Just had my engine dyno'd and air fuel ratio checked
Jeep stroker dyno test:
http://home.pacbell.net/jay_w007/dyno_sheet_text.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 4.2 block / 4.0 Head.
>
> Results: 124.9 Horsepower. I should have about 160, yes?
>
> Air/Fuel ratio came back a tad lean if anything.
>
> Engine has about 60 miles on it.
>
> Mechanic told me there's nothing wrong with the injectors.
>
> Bill
http://home.pacbell.net/jay_w007/dyno_sheet_text.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 4.2 block / 4.0 Head.
>
> Results: 124.9 Horsepower. I should have about 160, yes?
>
> Air/Fuel ratio came back a tad lean if anything.
>
> Engine has about 60 miles on it.
>
> Mechanic told me there's nothing wrong with the injectors.
>
> Bill
#125
Guest
Posts: n/a
Re: Just had my engine dyno'd and air fuel ratio checked
Jeep stroker dyno test:
http://home.pacbell.net/jay_w007/dyno_sheet_text.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 4.2 block / 4.0 Head.
>
> Results: 124.9 Horsepower. I should have about 160, yes?
>
> Air/Fuel ratio came back a tad lean if anything.
>
> Engine has about 60 miles on it.
>
> Mechanic told me there's nothing wrong with the injectors.
>
> Bill
http://home.pacbell.net/jay_w007/dyno_sheet_text.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 4.2 block / 4.0 Head.
>
> Results: 124.9 Horsepower. I should have about 160, yes?
>
> Air/Fuel ratio came back a tad lean if anything.
>
> Engine has about 60 miles on it.
>
> Mechanic told me there's nothing wrong with the injectors.
>
> Bill
Thread
Thread Starter
Forum
Replies
Last Post
Cartelinc
General Jeep and Tech Talk.
1
04-01-2013 11:10 AM
rock_bustin
Jeep Mailing List
28
09-09-2007 10:11 PM
Christian Fry
Jeep Mailing List
21
02-24-2004 01:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)