Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
Guest
Posts: n/a
Re: Just as an FYI, I was looking for info on how to replace the lightsin my instrument panel
Ok, I will send it off.
No, the vanity and dome lights are on a different fuse.
The fuse for the dash light is a 5 amp located on the very top left
under the hazard flasher relay can.
The 'other' fuse for the dash dimmer also controls the tail lights so
the dash lights go out when the tail light fuse blows. This is fuse 5
or a 10 amp top center of the panel fuse.
Mike
Clint wrote:
>
> If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it. I'll
> take a look at the plugs first, and make sure everyone's connected properly.
> That or a fuse would be the most likely, I'd guess. Everything was working
> fine one morning, and dead the next. No middle ground.
>
> Are the interior lights (vanity lights?) on the same fuse as the intrument
> cluster lights? Because those still work.
>
> Clint
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:45365A4C.41A8D41D@sympatico.ca...
> >I doubt that they all went at once. It is a parallel circuit.
> >
> > I have the page from my owners manual in jpg format that lists all the
> > lights on my 88 Cherokee. I could email it to you if you would like.
> >
> > The 2 lights for the heater control are #74's. I also doubt they are
> > both gone, it is usually the plug on them that comes loose or is missed
> > when it's off.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
> > Clint wrote:
> >>
> >> Does anyone know how many bulbs I need? I'd like to find that out BEFORE
> >> I
> >> pull the dash! :) They indicate that you need 5, but the older ones may
> >> need more bulbs. Hmm, now that I think about it, it seems odd that all 5
> >> would burn out at once. Or is it possibly just one that burned out,
> >> screwing up the circuit for the rest? What is that, a serial circuit?
> >>
> >> And the page I posted indicated an L194 bulb, but that was for a 91-96
> >> Cherokee. Can anyone confirm the kind? I couldn't find it in the FSM.
> >>
> >> Clint
> >>
> >> "Clint" <nobody@nowhere.none> wrote in message
> >> news:6IdZg.159093$R63.94918@pd7urf1no...
> >> > Got in my truck to go to work this morning. Headlights came on ok,
> >> > interior light... But no instrument panel lights.
> >> >
> >> > So I did some google searching, and found this link:
> >> > http://jeepwhitegauges.com/cher9196instructions.htm
> >> >
> >> > No affliation with the people doing it, but it looks pretty clear on
> >> > how
> >> > to take it all apart. This is probably old news for many of you, but
> >> > there's probably newbies like me that need it! :)
> >> >
> >> > Now if I could figure out how to replace the bulb for the heater/fan
> >> > panel...
> >> >
> >> > Clint
> >> >
No, the vanity and dome lights are on a different fuse.
The fuse for the dash light is a 5 amp located on the very top left
under the hazard flasher relay can.
The 'other' fuse for the dash dimmer also controls the tail lights so
the dash lights go out when the tail light fuse blows. This is fuse 5
or a 10 amp top center of the panel fuse.
Mike
Clint wrote:
>
> If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it. I'll
> take a look at the plugs first, and make sure everyone's connected properly.
> That or a fuse would be the most likely, I'd guess. Everything was working
> fine one morning, and dead the next. No middle ground.
>
> Are the interior lights (vanity lights?) on the same fuse as the intrument
> cluster lights? Because those still work.
>
> Clint
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:45365A4C.41A8D41D@sympatico.ca...
> >I doubt that they all went at once. It is a parallel circuit.
> >
> > I have the page from my owners manual in jpg format that lists all the
> > lights on my 88 Cherokee. I could email it to you if you would like.
> >
> > The 2 lights for the heater control are #74's. I also doubt they are
> > both gone, it is usually the plug on them that comes loose or is missed
> > when it's off.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
> > Clint wrote:
> >>
> >> Does anyone know how many bulbs I need? I'd like to find that out BEFORE
> >> I
> >> pull the dash! :) They indicate that you need 5, but the older ones may
> >> need more bulbs. Hmm, now that I think about it, it seems odd that all 5
> >> would burn out at once. Or is it possibly just one that burned out,
> >> screwing up the circuit for the rest? What is that, a serial circuit?
> >>
> >> And the page I posted indicated an L194 bulb, but that was for a 91-96
> >> Cherokee. Can anyone confirm the kind? I couldn't find it in the FSM.
> >>
> >> Clint
> >>
> >> "Clint" <nobody@nowhere.none> wrote in message
> >> news:6IdZg.159093$R63.94918@pd7urf1no...
> >> > Got in my truck to go to work this morning. Headlights came on ok,
> >> > interior light... But no instrument panel lights.
> >> >
> >> > So I did some google searching, and found this link:
> >> > http://jeepwhitegauges.com/cher9196instructions.htm
> >> >
> >> > No affliation with the people doing it, but it looks pretty clear on
> >> > how
> >> > to take it all apart. This is probably old news for many of you, but
> >> > there's probably newbies like me that need it! :)
> >> >
> >> > Now if I could figure out how to replace the bulb for the heater/fan
> >> > panel...
> >> >
> >> > Clint
> >> >
Guest
Posts: n/a
Re: Just as an FYI, I was looking for info on how to replace the lightsin my instrument panel
Ok, I will send it off.
No, the vanity and dome lights are on a different fuse.
The fuse for the dash light is a 5 amp located on the very top left
under the hazard flasher relay can.
The 'other' fuse for the dash dimmer also controls the tail lights so
the dash lights go out when the tail light fuse blows. This is fuse 5
or a 10 amp top center of the panel fuse.
Mike
Clint wrote:
>
> If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it. I'll
> take a look at the plugs first, and make sure everyone's connected properly.
> That or a fuse would be the most likely, I'd guess. Everything was working
> fine one morning, and dead the next. No middle ground.
>
> Are the interior lights (vanity lights?) on the same fuse as the intrument
> cluster lights? Because those still work.
>
> Clint
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:45365A4C.41A8D41D@sympatico.ca...
> >I doubt that they all went at once. It is a parallel circuit.
> >
> > I have the page from my owners manual in jpg format that lists all the
> > lights on my 88 Cherokee. I could email it to you if you would like.
> >
> > The 2 lights for the heater control are #74's. I also doubt they are
> > both gone, it is usually the plug on them that comes loose or is missed
> > when it's off.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
> > Clint wrote:
> >>
> >> Does anyone know how many bulbs I need? I'd like to find that out BEFORE
> >> I
> >> pull the dash! :) They indicate that you need 5, but the older ones may
> >> need more bulbs. Hmm, now that I think about it, it seems odd that all 5
> >> would burn out at once. Or is it possibly just one that burned out,
> >> screwing up the circuit for the rest? What is that, a serial circuit?
> >>
> >> And the page I posted indicated an L194 bulb, but that was for a 91-96
> >> Cherokee. Can anyone confirm the kind? I couldn't find it in the FSM.
> >>
> >> Clint
> >>
> >> "Clint" <nobody@nowhere.none> wrote in message
> >> news:6IdZg.159093$R63.94918@pd7urf1no...
> >> > Got in my truck to go to work this morning. Headlights came on ok,
> >> > interior light... But no instrument panel lights.
> >> >
> >> > So I did some google searching, and found this link:
> >> > http://jeepwhitegauges.com/cher9196instructions.htm
> >> >
> >> > No affliation with the people doing it, but it looks pretty clear on
> >> > how
> >> > to take it all apart. This is probably old news for many of you, but
> >> > there's probably newbies like me that need it! :)
> >> >
> >> > Now if I could figure out how to replace the bulb for the heater/fan
> >> > panel...
> >> >
> >> > Clint
> >> >
No, the vanity and dome lights are on a different fuse.
The fuse for the dash light is a 5 amp located on the very top left
under the hazard flasher relay can.
The 'other' fuse for the dash dimmer also controls the tail lights so
the dash lights go out when the tail light fuse blows. This is fuse 5
or a 10 amp top center of the panel fuse.
Mike
Clint wrote:
>
> If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it. I'll
> take a look at the plugs first, and make sure everyone's connected properly.
> That or a fuse would be the most likely, I'd guess. Everything was working
> fine one morning, and dead the next. No middle ground.
>
> Are the interior lights (vanity lights?) on the same fuse as the intrument
> cluster lights? Because those still work.
>
> Clint
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:45365A4C.41A8D41D@sympatico.ca...
> >I doubt that they all went at once. It is a parallel circuit.
> >
> > I have the page from my owners manual in jpg format that lists all the
> > lights on my 88 Cherokee. I could email it to you if you would like.
> >
> > The 2 lights for the heater control are #74's. I also doubt they are
> > both gone, it is usually the plug on them that comes loose or is missed
> > when it's off.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
> > Clint wrote:
> >>
> >> Does anyone know how many bulbs I need? I'd like to find that out BEFORE
> >> I
> >> pull the dash! :) They indicate that you need 5, but the older ones may
> >> need more bulbs. Hmm, now that I think about it, it seems odd that all 5
> >> would burn out at once. Or is it possibly just one that burned out,
> >> screwing up the circuit for the rest? What is that, a serial circuit?
> >>
> >> And the page I posted indicated an L194 bulb, but that was for a 91-96
> >> Cherokee. Can anyone confirm the kind? I couldn't find it in the FSM.
> >>
> >> Clint
> >>
> >> "Clint" <nobody@nowhere.none> wrote in message
> >> news:6IdZg.159093$R63.94918@pd7urf1no...
> >> > Got in my truck to go to work this morning. Headlights came on ok,
> >> > interior light... But no instrument panel lights.
> >> >
> >> > So I did some google searching, and found this link:
> >> > http://jeepwhitegauges.com/cher9196instructions.htm
> >> >
> >> > No affliation with the people doing it, but it looks pretty clear on
> >> > how
> >> > to take it all apart. This is probably old news for many of you, but
> >> > there's probably newbies like me that need it! :)
> >> >
> >> > Now if I could figure out how to replace the bulb for the heater/fan
> >> > panel...
> >> >
> >> > Clint
> >> >
Guest
Posts: n/a
Re: Just as an FYI, I was looking for info on how to replace the lightsin my instrument panel
Oops, that dash light fuse is at the top right, not left, sorry and is
called 'inst lps'.
Mike
Mike Romain wrote:
>
> Ok, I will send it off.
>
> No, the vanity and dome lights are on a different fuse.
>
> The fuse for the dash light is a 5 amp located on the very top left
> under the hazard flasher relay can.
>
> The 'other' fuse for the dash dimmer also controls the tail lights so
> the dash lights go out when the tail light fuse blows. This is fuse 5
> or a 10 amp top center of the panel fuse.
>
> Mike
>
> Clint wrote:
> >
> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it. I'll
> > take a look at the plugs first, and make sure everyone's connected properly.
> > That or a fuse would be the most likely, I'd guess. Everything was working
> > fine one morning, and dead the next. No middle ground.
> >
> > Are the interior lights (vanity lights?) on the same fuse as the intrument
> > cluster lights? Because those still work.
> >
> > Clint
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:45365A4C.41A8D41D@sympatico.ca...
> > >I doubt that they all went at once. It is a parallel circuit.
> > >
> > > I have the page from my owners manual in jpg format that lists all the
> > > lights on my 88 Cherokee. I could email it to you if you would like.
> > >
> > > The 2 lights for the heater control are #74's. I also doubt they are
> > > both gone, it is usually the plug on them that comes loose or is missed
> > > when it's off.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Clint wrote:
> > >>
> > >> Does anyone know how many bulbs I need? I'd like to find that out BEFORE
> > >> I
> > >> pull the dash! :) They indicate that you need 5, but the older ones may
> > >> need more bulbs. Hmm, now that I think about it, it seems odd that all 5
> > >> would burn out at once. Or is it possibly just one that burned out,
> > >> screwing up the circuit for the rest? What is that, a serial circuit?
> > >>
> > >> And the page I posted indicated an L194 bulb, but that was for a 91-96
> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the FSM.
> > >>
> > >> Clint
> > >>
> > >> "Clint" <nobody@nowhere.none> wrote in message
> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
> > >> > Got in my truck to go to work this morning. Headlights came on ok,
> > >> > interior light... But no instrument panel lights.
> > >> >
> > >> > So I did some google searching, and found this link:
> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
> > >> >
> > >> > No affliation with the people doing it, but it looks pretty clear on
> > >> > how
> > >> > to take it all apart. This is probably old news for many of you, but
> > >> > there's probably newbies like me that need it! :)
> > >> >
> > >> > Now if I could figure out how to replace the bulb for the heater/fan
> > >> > panel...
> > >> >
> > >> > Clint
> > >> >
called 'inst lps'.
Mike
Mike Romain wrote:
>
> Ok, I will send it off.
>
> No, the vanity and dome lights are on a different fuse.
>
> The fuse for the dash light is a 5 amp located on the very top left
> under the hazard flasher relay can.
>
> The 'other' fuse for the dash dimmer also controls the tail lights so
> the dash lights go out when the tail light fuse blows. This is fuse 5
> or a 10 amp top center of the panel fuse.
>
> Mike
>
> Clint wrote:
> >
> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it. I'll
> > take a look at the plugs first, and make sure everyone's connected properly.
> > That or a fuse would be the most likely, I'd guess. Everything was working
> > fine one morning, and dead the next. No middle ground.
> >
> > Are the interior lights (vanity lights?) on the same fuse as the intrument
> > cluster lights? Because those still work.
> >
> > Clint
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:45365A4C.41A8D41D@sympatico.ca...
> > >I doubt that they all went at once. It is a parallel circuit.
> > >
> > > I have the page from my owners manual in jpg format that lists all the
> > > lights on my 88 Cherokee. I could email it to you if you would like.
> > >
> > > The 2 lights for the heater control are #74's. I also doubt they are
> > > both gone, it is usually the plug on them that comes loose or is missed
> > > when it's off.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Clint wrote:
> > >>
> > >> Does anyone know how many bulbs I need? I'd like to find that out BEFORE
> > >> I
> > >> pull the dash! :) They indicate that you need 5, but the older ones may
> > >> need more bulbs. Hmm, now that I think about it, it seems odd that all 5
> > >> would burn out at once. Or is it possibly just one that burned out,
> > >> screwing up the circuit for the rest? What is that, a serial circuit?
> > >>
> > >> And the page I posted indicated an L194 bulb, but that was for a 91-96
> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the FSM.
> > >>
> > >> Clint
> > >>
> > >> "Clint" <nobody@nowhere.none> wrote in message
> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
> > >> > Got in my truck to go to work this morning. Headlights came on ok,
> > >> > interior light... But no instrument panel lights.
> > >> >
> > >> > So I did some google searching, and found this link:
> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
> > >> >
> > >> > No affliation with the people doing it, but it looks pretty clear on
> > >> > how
> > >> > to take it all apart. This is probably old news for many of you, but
> > >> > there's probably newbies like me that need it! :)
> > >> >
> > >> > Now if I could figure out how to replace the bulb for the heater/fan
> > >> > panel...
> > >> >
> > >> > Clint
> > >> >
Guest
Posts: n/a
Re: Just as an FYI, I was looking for info on how to replace the lightsin my instrument panel
Oops, that dash light fuse is at the top right, not left, sorry and is
called 'inst lps'.
Mike
Mike Romain wrote:
>
> Ok, I will send it off.
>
> No, the vanity and dome lights are on a different fuse.
>
> The fuse for the dash light is a 5 amp located on the very top left
> under the hazard flasher relay can.
>
> The 'other' fuse for the dash dimmer also controls the tail lights so
> the dash lights go out when the tail light fuse blows. This is fuse 5
> or a 10 amp top center of the panel fuse.
>
> Mike
>
> Clint wrote:
> >
> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it. I'll
> > take a look at the plugs first, and make sure everyone's connected properly.
> > That or a fuse would be the most likely, I'd guess. Everything was working
> > fine one morning, and dead the next. No middle ground.
> >
> > Are the interior lights (vanity lights?) on the same fuse as the intrument
> > cluster lights? Because those still work.
> >
> > Clint
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:45365A4C.41A8D41D@sympatico.ca...
> > >I doubt that they all went at once. It is a parallel circuit.
> > >
> > > I have the page from my owners manual in jpg format that lists all the
> > > lights on my 88 Cherokee. I could email it to you if you would like.
> > >
> > > The 2 lights for the heater control are #74's. I also doubt they are
> > > both gone, it is usually the plug on them that comes loose or is missed
> > > when it's off.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Clint wrote:
> > >>
> > >> Does anyone know how many bulbs I need? I'd like to find that out BEFORE
> > >> I
> > >> pull the dash! :) They indicate that you need 5, but the older ones may
> > >> need more bulbs. Hmm, now that I think about it, it seems odd that all 5
> > >> would burn out at once. Or is it possibly just one that burned out,
> > >> screwing up the circuit for the rest? What is that, a serial circuit?
> > >>
> > >> And the page I posted indicated an L194 bulb, but that was for a 91-96
> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the FSM.
> > >>
> > >> Clint
> > >>
> > >> "Clint" <nobody@nowhere.none> wrote in message
> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
> > >> > Got in my truck to go to work this morning. Headlights came on ok,
> > >> > interior light... But no instrument panel lights.
> > >> >
> > >> > So I did some google searching, and found this link:
> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
> > >> >
> > >> > No affliation with the people doing it, but it looks pretty clear on
> > >> > how
> > >> > to take it all apart. This is probably old news for many of you, but
> > >> > there's probably newbies like me that need it! :)
> > >> >
> > >> > Now if I could figure out how to replace the bulb for the heater/fan
> > >> > panel...
> > >> >
> > >> > Clint
> > >> >
called 'inst lps'.
Mike
Mike Romain wrote:
>
> Ok, I will send it off.
>
> No, the vanity and dome lights are on a different fuse.
>
> The fuse for the dash light is a 5 amp located on the very top left
> under the hazard flasher relay can.
>
> The 'other' fuse for the dash dimmer also controls the tail lights so
> the dash lights go out when the tail light fuse blows. This is fuse 5
> or a 10 amp top center of the panel fuse.
>
> Mike
>
> Clint wrote:
> >
> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it. I'll
> > take a look at the plugs first, and make sure everyone's connected properly.
> > That or a fuse would be the most likely, I'd guess. Everything was working
> > fine one morning, and dead the next. No middle ground.
> >
> > Are the interior lights (vanity lights?) on the same fuse as the intrument
> > cluster lights? Because those still work.
> >
> > Clint
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:45365A4C.41A8D41D@sympatico.ca...
> > >I doubt that they all went at once. It is a parallel circuit.
> > >
> > > I have the page from my owners manual in jpg format that lists all the
> > > lights on my 88 Cherokee. I could email it to you if you would like.
> > >
> > > The 2 lights for the heater control are #74's. I also doubt they are
> > > both gone, it is usually the plug on them that comes loose or is missed
> > > when it's off.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Clint wrote:
> > >>
> > >> Does anyone know how many bulbs I need? I'd like to find that out BEFORE
> > >> I
> > >> pull the dash! :) They indicate that you need 5, but the older ones may
> > >> need more bulbs. Hmm, now that I think about it, it seems odd that all 5
> > >> would burn out at once. Or is it possibly just one that burned out,
> > >> screwing up the circuit for the rest? What is that, a serial circuit?
> > >>
> > >> And the page I posted indicated an L194 bulb, but that was for a 91-96
> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the FSM.
> > >>
> > >> Clint
> > >>
> > >> "Clint" <nobody@nowhere.none> wrote in message
> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
> > >> > Got in my truck to go to work this morning. Headlights came on ok,
> > >> > interior light... But no instrument panel lights.
> > >> >
> > >> > So I did some google searching, and found this link:
> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
> > >> >
> > >> > No affliation with the people doing it, but it looks pretty clear on
> > >> > how
> > >> > to take it all apart. This is probably old news for many of you, but
> > >> > there's probably newbies like me that need it! :)
> > >> >
> > >> > Now if I could figure out how to replace the bulb for the heater/fan
> > >> > panel...
> > >> >
> > >> > Clint
> > >> >
Guest
Posts: n/a
Re: Just as an FYI, I was looking for info on how to replace the lightsin my instrument panel
Oops, that dash light fuse is at the top right, not left, sorry and is
called 'inst lps'.
Mike
Mike Romain wrote:
>
> Ok, I will send it off.
>
> No, the vanity and dome lights are on a different fuse.
>
> The fuse for the dash light is a 5 amp located on the very top left
> under the hazard flasher relay can.
>
> The 'other' fuse for the dash dimmer also controls the tail lights so
> the dash lights go out when the tail light fuse blows. This is fuse 5
> or a 10 amp top center of the panel fuse.
>
> Mike
>
> Clint wrote:
> >
> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it. I'll
> > take a look at the plugs first, and make sure everyone's connected properly.
> > That or a fuse would be the most likely, I'd guess. Everything was working
> > fine one morning, and dead the next. No middle ground.
> >
> > Are the interior lights (vanity lights?) on the same fuse as the intrument
> > cluster lights? Because those still work.
> >
> > Clint
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:45365A4C.41A8D41D@sympatico.ca...
> > >I doubt that they all went at once. It is a parallel circuit.
> > >
> > > I have the page from my owners manual in jpg format that lists all the
> > > lights on my 88 Cherokee. I could email it to you if you would like.
> > >
> > > The 2 lights for the heater control are #74's. I also doubt they are
> > > both gone, it is usually the plug on them that comes loose or is missed
> > > when it's off.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Clint wrote:
> > >>
> > >> Does anyone know how many bulbs I need? I'd like to find that out BEFORE
> > >> I
> > >> pull the dash! :) They indicate that you need 5, but the older ones may
> > >> need more bulbs. Hmm, now that I think about it, it seems odd that all 5
> > >> would burn out at once. Or is it possibly just one that burned out,
> > >> screwing up the circuit for the rest? What is that, a serial circuit?
> > >>
> > >> And the page I posted indicated an L194 bulb, but that was for a 91-96
> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the FSM.
> > >>
> > >> Clint
> > >>
> > >> "Clint" <nobody@nowhere.none> wrote in message
> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
> > >> > Got in my truck to go to work this morning. Headlights came on ok,
> > >> > interior light... But no instrument panel lights.
> > >> >
> > >> > So I did some google searching, and found this link:
> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
> > >> >
> > >> > No affliation with the people doing it, but it looks pretty clear on
> > >> > how
> > >> > to take it all apart. This is probably old news for many of you, but
> > >> > there's probably newbies like me that need it! :)
> > >> >
> > >> > Now if I could figure out how to replace the bulb for the heater/fan
> > >> > panel...
> > >> >
> > >> > Clint
> > >> >
called 'inst lps'.
Mike
Mike Romain wrote:
>
> Ok, I will send it off.
>
> No, the vanity and dome lights are on a different fuse.
>
> The fuse for the dash light is a 5 amp located on the very top left
> under the hazard flasher relay can.
>
> The 'other' fuse for the dash dimmer also controls the tail lights so
> the dash lights go out when the tail light fuse blows. This is fuse 5
> or a 10 amp top center of the panel fuse.
>
> Mike
>
> Clint wrote:
> >
> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it. I'll
> > take a look at the plugs first, and make sure everyone's connected properly.
> > That or a fuse would be the most likely, I'd guess. Everything was working
> > fine one morning, and dead the next. No middle ground.
> >
> > Are the interior lights (vanity lights?) on the same fuse as the intrument
> > cluster lights? Because those still work.
> >
> > Clint
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:45365A4C.41A8D41D@sympatico.ca...
> > >I doubt that they all went at once. It is a parallel circuit.
> > >
> > > I have the page from my owners manual in jpg format that lists all the
> > > lights on my 88 Cherokee. I could email it to you if you would like.
> > >
> > > The 2 lights for the heater control are #74's. I also doubt they are
> > > both gone, it is usually the plug on them that comes loose or is missed
> > > when it's off.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Clint wrote:
> > >>
> > >> Does anyone know how many bulbs I need? I'd like to find that out BEFORE
> > >> I
> > >> pull the dash! :) They indicate that you need 5, but the older ones may
> > >> need more bulbs. Hmm, now that I think about it, it seems odd that all 5
> > >> would burn out at once. Or is it possibly just one that burned out,
> > >> screwing up the circuit for the rest? What is that, a serial circuit?
> > >>
> > >> And the page I posted indicated an L194 bulb, but that was for a 91-96
> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the FSM.
> > >>
> > >> Clint
> > >>
> > >> "Clint" <nobody@nowhere.none> wrote in message
> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
> > >> > Got in my truck to go to work this morning. Headlights came on ok,
> > >> > interior light... But no instrument panel lights.
> > >> >
> > >> > So I did some google searching, and found this link:
> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
> > >> >
> > >> > No affliation with the people doing it, but it looks pretty clear on
> > >> > how
> > >> > to take it all apart. This is probably old news for many of you, but
> > >> > there's probably newbies like me that need it! :)
> > >> >
> > >> > Now if I could figure out how to replace the bulb for the heater/fan
> > >> > panel...
> > >> >
> > >> > Clint
> > >> >
Guest
Posts: n/a
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
Thanks for your replies (and the e-mail, too). I'll check the fuses first.
That sounds better than pulling the instrument cluster! :) Of couse, then
I'll have to figure out why the fuse blew...
Clint
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:45366932.74214E5A@sympatico.ca...
> Oops, that dash light fuse is at the top right, not left, sorry and is
> called 'inst lps'.
>
> Mike
>
> Mike Romain wrote:
>>
>> Ok, I will send it off.
>>
>> No, the vanity and dome lights are on a different fuse.
>>
>> The fuse for the dash light is a 5 amp located on the very top left
>> under the hazard flasher relay can.
>>
>> The 'other' fuse for the dash dimmer also controls the tail lights so
>> the dash lights go out when the tail light fuse blows. This is fuse 5
>> or a 10 amp top center of the panel fuse.
>>
>> Mike
>>
>> Clint wrote:
>> >
>> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it.
>> > I'll
>> > take a look at the plugs first, and make sure everyone's connected
>> > properly.
>> > That or a fuse would be the most likely, I'd guess. Everything was
>> > working
>> > fine one morning, and dead the next. No middle ground.
>> >
>> > Are the interior lights (vanity lights?) on the same fuse as the
>> > intrument
>> > cluster lights? Because those still work.
>> >
>> > Clint
>> >
>> > "Mike Romain" <romainm@sympatico.ca> wrote in message
>> > news:45365A4C.41A8D41D@sympatico.ca...
>> > >I doubt that they all went at once. It is a parallel circuit.
>> > >
>> > > I have the page from my owners manual in jpg format that lists all
>> > > the
>> > > lights on my 88 Cherokee. I could email it to you if you would like.
>> > >
>> > > The 2 lights for the heater control are #74's. I also doubt they are
>> > > both gone, it is usually the plug on them that comes loose or is
>> > > missed
>> > > when it's off.
>> > >
>> > > Mike
>> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > 88 Cherokee 235 BFG AT's
>> > > Canadian Off Road Trips Photos: Non members can still view!
>> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> > > (More Off Road album links at bottom of the view page)
>> > >
>> > > Clint wrote:
>> > >>
>> > >> Does anyone know how many bulbs I need? I'd like to find that out
>> > >> BEFORE
>> > >> I
>> > >> pull the dash! :) They indicate that you need 5, but the older ones
>> > >> may
>> > >> need more bulbs. Hmm, now that I think about it, it seems odd that
>> > >> all 5
>> > >> would burn out at once. Or is it possibly just one that burned out,
>> > >> screwing up the circuit for the rest? What is that, a serial
>> > >> circuit?
>> > >>
>> > >> And the page I posted indicated an L194 bulb, but that was for a
>> > >> 91-96
>> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the
>> > >> FSM.
>> > >>
>> > >> Clint
>> > >>
>> > >> "Clint" <nobody@nowhere.none> wrote in message
>> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
>> > >> > Got in my truck to go to work this morning. Headlights came on
>> > >> > ok,
>> > >> > interior light... But no instrument panel lights.
>> > >> >
>> > >> > So I did some google searching, and found this link:
>> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
>> > >> >
>> > >> > No affliation with the people doing it, but it looks pretty clear
>> > >> > on
>> > >> > how
>> > >> > to take it all apart. This is probably old news for many of you,
>> > >> > but
>> > >> > there's probably newbies like me that need it! :)
>> > >> >
>> > >> > Now if I could figure out how to replace the bulb for the
>> > >> > heater/fan
>> > >> > panel...
>> > >> >
>> > >> > Clint
>> > >> >
That sounds better than pulling the instrument cluster! :) Of couse, then
I'll have to figure out why the fuse blew...
Clint
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:45366932.74214E5A@sympatico.ca...
> Oops, that dash light fuse is at the top right, not left, sorry and is
> called 'inst lps'.
>
> Mike
>
> Mike Romain wrote:
>>
>> Ok, I will send it off.
>>
>> No, the vanity and dome lights are on a different fuse.
>>
>> The fuse for the dash light is a 5 amp located on the very top left
>> under the hazard flasher relay can.
>>
>> The 'other' fuse for the dash dimmer also controls the tail lights so
>> the dash lights go out when the tail light fuse blows. This is fuse 5
>> or a 10 amp top center of the panel fuse.
>>
>> Mike
>>
>> Clint wrote:
>> >
>> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it.
>> > I'll
>> > take a look at the plugs first, and make sure everyone's connected
>> > properly.
>> > That or a fuse would be the most likely, I'd guess. Everything was
>> > working
>> > fine one morning, and dead the next. No middle ground.
>> >
>> > Are the interior lights (vanity lights?) on the same fuse as the
>> > intrument
>> > cluster lights? Because those still work.
>> >
>> > Clint
>> >
>> > "Mike Romain" <romainm@sympatico.ca> wrote in message
>> > news:45365A4C.41A8D41D@sympatico.ca...
>> > >I doubt that they all went at once. It is a parallel circuit.
>> > >
>> > > I have the page from my owners manual in jpg format that lists all
>> > > the
>> > > lights on my 88 Cherokee. I could email it to you if you would like.
>> > >
>> > > The 2 lights for the heater control are #74's. I also doubt they are
>> > > both gone, it is usually the plug on them that comes loose or is
>> > > missed
>> > > when it's off.
>> > >
>> > > Mike
>> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > 88 Cherokee 235 BFG AT's
>> > > Canadian Off Road Trips Photos: Non members can still view!
>> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> > > (More Off Road album links at bottom of the view page)
>> > >
>> > > Clint wrote:
>> > >>
>> > >> Does anyone know how many bulbs I need? I'd like to find that out
>> > >> BEFORE
>> > >> I
>> > >> pull the dash! :) They indicate that you need 5, but the older ones
>> > >> may
>> > >> need more bulbs. Hmm, now that I think about it, it seems odd that
>> > >> all 5
>> > >> would burn out at once. Or is it possibly just one that burned out,
>> > >> screwing up the circuit for the rest? What is that, a serial
>> > >> circuit?
>> > >>
>> > >> And the page I posted indicated an L194 bulb, but that was for a
>> > >> 91-96
>> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the
>> > >> FSM.
>> > >>
>> > >> Clint
>> > >>
>> > >> "Clint" <nobody@nowhere.none> wrote in message
>> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
>> > >> > Got in my truck to go to work this morning. Headlights came on
>> > >> > ok,
>> > >> > interior light... But no instrument panel lights.
>> > >> >
>> > >> > So I did some google searching, and found this link:
>> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
>> > >> >
>> > >> > No affliation with the people doing it, but it looks pretty clear
>> > >> > on
>> > >> > how
>> > >> > to take it all apart. This is probably old news for many of you,
>> > >> > but
>> > >> > there's probably newbies like me that need it! :)
>> > >> >
>> > >> > Now if I could figure out how to replace the bulb for the
>> > >> > heater/fan
>> > >> > panel...
>> > >> >
>> > >> > Clint
>> > >> >
Guest
Posts: n/a
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
Thanks for your replies (and the e-mail, too). I'll check the fuses first.
That sounds better than pulling the instrument cluster! :) Of couse, then
I'll have to figure out why the fuse blew...
Clint
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:45366932.74214E5A@sympatico.ca...
> Oops, that dash light fuse is at the top right, not left, sorry and is
> called 'inst lps'.
>
> Mike
>
> Mike Romain wrote:
>>
>> Ok, I will send it off.
>>
>> No, the vanity and dome lights are on a different fuse.
>>
>> The fuse for the dash light is a 5 amp located on the very top left
>> under the hazard flasher relay can.
>>
>> The 'other' fuse for the dash dimmer also controls the tail lights so
>> the dash lights go out when the tail light fuse blows. This is fuse 5
>> or a 10 amp top center of the panel fuse.
>>
>> Mike
>>
>> Clint wrote:
>> >
>> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it.
>> > I'll
>> > take a look at the plugs first, and make sure everyone's connected
>> > properly.
>> > That or a fuse would be the most likely, I'd guess. Everything was
>> > working
>> > fine one morning, and dead the next. No middle ground.
>> >
>> > Are the interior lights (vanity lights?) on the same fuse as the
>> > intrument
>> > cluster lights? Because those still work.
>> >
>> > Clint
>> >
>> > "Mike Romain" <romainm@sympatico.ca> wrote in message
>> > news:45365A4C.41A8D41D@sympatico.ca...
>> > >I doubt that they all went at once. It is a parallel circuit.
>> > >
>> > > I have the page from my owners manual in jpg format that lists all
>> > > the
>> > > lights on my 88 Cherokee. I could email it to you if you would like.
>> > >
>> > > The 2 lights for the heater control are #74's. I also doubt they are
>> > > both gone, it is usually the plug on them that comes loose or is
>> > > missed
>> > > when it's off.
>> > >
>> > > Mike
>> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > 88 Cherokee 235 BFG AT's
>> > > Canadian Off Road Trips Photos: Non members can still view!
>> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> > > (More Off Road album links at bottom of the view page)
>> > >
>> > > Clint wrote:
>> > >>
>> > >> Does anyone know how many bulbs I need? I'd like to find that out
>> > >> BEFORE
>> > >> I
>> > >> pull the dash! :) They indicate that you need 5, but the older ones
>> > >> may
>> > >> need more bulbs. Hmm, now that I think about it, it seems odd that
>> > >> all 5
>> > >> would burn out at once. Or is it possibly just one that burned out,
>> > >> screwing up the circuit for the rest? What is that, a serial
>> > >> circuit?
>> > >>
>> > >> And the page I posted indicated an L194 bulb, but that was for a
>> > >> 91-96
>> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the
>> > >> FSM.
>> > >>
>> > >> Clint
>> > >>
>> > >> "Clint" <nobody@nowhere.none> wrote in message
>> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
>> > >> > Got in my truck to go to work this morning. Headlights came on
>> > >> > ok,
>> > >> > interior light... But no instrument panel lights.
>> > >> >
>> > >> > So I did some google searching, and found this link:
>> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
>> > >> >
>> > >> > No affliation with the people doing it, but it looks pretty clear
>> > >> > on
>> > >> > how
>> > >> > to take it all apart. This is probably old news for many of you,
>> > >> > but
>> > >> > there's probably newbies like me that need it! :)
>> > >> >
>> > >> > Now if I could figure out how to replace the bulb for the
>> > >> > heater/fan
>> > >> > panel...
>> > >> >
>> > >> > Clint
>> > >> >
That sounds better than pulling the instrument cluster! :) Of couse, then
I'll have to figure out why the fuse blew...
Clint
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:45366932.74214E5A@sympatico.ca...
> Oops, that dash light fuse is at the top right, not left, sorry and is
> called 'inst lps'.
>
> Mike
>
> Mike Romain wrote:
>>
>> Ok, I will send it off.
>>
>> No, the vanity and dome lights are on a different fuse.
>>
>> The fuse for the dash light is a 5 amp located on the very top left
>> under the hazard flasher relay can.
>>
>> The 'other' fuse for the dash dimmer also controls the tail lights so
>> the dash lights go out when the tail light fuse blows. This is fuse 5
>> or a 10 amp top center of the panel fuse.
>>
>> Mike
>>
>> Clint wrote:
>> >
>> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it.
>> > I'll
>> > take a look at the plugs first, and make sure everyone's connected
>> > properly.
>> > That or a fuse would be the most likely, I'd guess. Everything was
>> > working
>> > fine one morning, and dead the next. No middle ground.
>> >
>> > Are the interior lights (vanity lights?) on the same fuse as the
>> > intrument
>> > cluster lights? Because those still work.
>> >
>> > Clint
>> >
>> > "Mike Romain" <romainm@sympatico.ca> wrote in message
>> > news:45365A4C.41A8D41D@sympatico.ca...
>> > >I doubt that they all went at once. It is a parallel circuit.
>> > >
>> > > I have the page from my owners manual in jpg format that lists all
>> > > the
>> > > lights on my 88 Cherokee. I could email it to you if you would like.
>> > >
>> > > The 2 lights for the heater control are #74's. I also doubt they are
>> > > both gone, it is usually the plug on them that comes loose or is
>> > > missed
>> > > when it's off.
>> > >
>> > > Mike
>> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > 88 Cherokee 235 BFG AT's
>> > > Canadian Off Road Trips Photos: Non members can still view!
>> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> > > (More Off Road album links at bottom of the view page)
>> > >
>> > > Clint wrote:
>> > >>
>> > >> Does anyone know how many bulbs I need? I'd like to find that out
>> > >> BEFORE
>> > >> I
>> > >> pull the dash! :) They indicate that you need 5, but the older ones
>> > >> may
>> > >> need more bulbs. Hmm, now that I think about it, it seems odd that
>> > >> all 5
>> > >> would burn out at once. Or is it possibly just one that burned out,
>> > >> screwing up the circuit for the rest? What is that, a serial
>> > >> circuit?
>> > >>
>> > >> And the page I posted indicated an L194 bulb, but that was for a
>> > >> 91-96
>> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the
>> > >> FSM.
>> > >>
>> > >> Clint
>> > >>
>> > >> "Clint" <nobody@nowhere.none> wrote in message
>> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
>> > >> > Got in my truck to go to work this morning. Headlights came on
>> > >> > ok,
>> > >> > interior light... But no instrument panel lights.
>> > >> >
>> > >> > So I did some google searching, and found this link:
>> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
>> > >> >
>> > >> > No affliation with the people doing it, but it looks pretty clear
>> > >> > on
>> > >> > how
>> > >> > to take it all apart. This is probably old news for many of you,
>> > >> > but
>> > >> > there's probably newbies like me that need it! :)
>> > >> >
>> > >> > Now if I could figure out how to replace the bulb for the
>> > >> > heater/fan
>> > >> > panel...
>> > >> >
>> > >> > Clint
>> > >> >
Guest
Posts: n/a
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
Thanks for your replies (and the e-mail, too). I'll check the fuses first.
That sounds better than pulling the instrument cluster! :) Of couse, then
I'll have to figure out why the fuse blew...
Clint
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:45366932.74214E5A@sympatico.ca...
> Oops, that dash light fuse is at the top right, not left, sorry and is
> called 'inst lps'.
>
> Mike
>
> Mike Romain wrote:
>>
>> Ok, I will send it off.
>>
>> No, the vanity and dome lights are on a different fuse.
>>
>> The fuse for the dash light is a 5 amp located on the very top left
>> under the hazard flasher relay can.
>>
>> The 'other' fuse for the dash dimmer also controls the tail lights so
>> the dash lights go out when the tail light fuse blows. This is fuse 5
>> or a 10 amp top center of the panel fuse.
>>
>> Mike
>>
>> Clint wrote:
>> >
>> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it.
>> > I'll
>> > take a look at the plugs first, and make sure everyone's connected
>> > properly.
>> > That or a fuse would be the most likely, I'd guess. Everything was
>> > working
>> > fine one morning, and dead the next. No middle ground.
>> >
>> > Are the interior lights (vanity lights?) on the same fuse as the
>> > intrument
>> > cluster lights? Because those still work.
>> >
>> > Clint
>> >
>> > "Mike Romain" <romainm@sympatico.ca> wrote in message
>> > news:45365A4C.41A8D41D@sympatico.ca...
>> > >I doubt that they all went at once. It is a parallel circuit.
>> > >
>> > > I have the page from my owners manual in jpg format that lists all
>> > > the
>> > > lights on my 88 Cherokee. I could email it to you if you would like.
>> > >
>> > > The 2 lights for the heater control are #74's. I also doubt they are
>> > > both gone, it is usually the plug on them that comes loose or is
>> > > missed
>> > > when it's off.
>> > >
>> > > Mike
>> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > 88 Cherokee 235 BFG AT's
>> > > Canadian Off Road Trips Photos: Non members can still view!
>> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> > > (More Off Road album links at bottom of the view page)
>> > >
>> > > Clint wrote:
>> > >>
>> > >> Does anyone know how many bulbs I need? I'd like to find that out
>> > >> BEFORE
>> > >> I
>> > >> pull the dash! :) They indicate that you need 5, but the older ones
>> > >> may
>> > >> need more bulbs. Hmm, now that I think about it, it seems odd that
>> > >> all 5
>> > >> would burn out at once. Or is it possibly just one that burned out,
>> > >> screwing up the circuit for the rest? What is that, a serial
>> > >> circuit?
>> > >>
>> > >> And the page I posted indicated an L194 bulb, but that was for a
>> > >> 91-96
>> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the
>> > >> FSM.
>> > >>
>> > >> Clint
>> > >>
>> > >> "Clint" <nobody@nowhere.none> wrote in message
>> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
>> > >> > Got in my truck to go to work this morning. Headlights came on
>> > >> > ok,
>> > >> > interior light... But no instrument panel lights.
>> > >> >
>> > >> > So I did some google searching, and found this link:
>> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
>> > >> >
>> > >> > No affliation with the people doing it, but it looks pretty clear
>> > >> > on
>> > >> > how
>> > >> > to take it all apart. This is probably old news for many of you,
>> > >> > but
>> > >> > there's probably newbies like me that need it! :)
>> > >> >
>> > >> > Now if I could figure out how to replace the bulb for the
>> > >> > heater/fan
>> > >> > panel...
>> > >> >
>> > >> > Clint
>> > >> >
That sounds better than pulling the instrument cluster! :) Of couse, then
I'll have to figure out why the fuse blew...
Clint
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:45366932.74214E5A@sympatico.ca...
> Oops, that dash light fuse is at the top right, not left, sorry and is
> called 'inst lps'.
>
> Mike
>
> Mike Romain wrote:
>>
>> Ok, I will send it off.
>>
>> No, the vanity and dome lights are on a different fuse.
>>
>> The fuse for the dash light is a 5 amp located on the very top left
>> under the hazard flasher relay can.
>>
>> The 'other' fuse for the dash dimmer also controls the tail lights so
>> the dash lights go out when the tail light fuse blows. This is fuse 5
>> or a 10 amp top center of the panel fuse.
>>
>> Mike
>>
>> Clint wrote:
>> >
>> > If you could e-mail that to me at cneufeld@shaw.ca, I'd appreciate it.
>> > I'll
>> > take a look at the plugs first, and make sure everyone's connected
>> > properly.
>> > That or a fuse would be the most likely, I'd guess. Everything was
>> > working
>> > fine one morning, and dead the next. No middle ground.
>> >
>> > Are the interior lights (vanity lights?) on the same fuse as the
>> > intrument
>> > cluster lights? Because those still work.
>> >
>> > Clint
>> >
>> > "Mike Romain" <romainm@sympatico.ca> wrote in message
>> > news:45365A4C.41A8D41D@sympatico.ca...
>> > >I doubt that they all went at once. It is a parallel circuit.
>> > >
>> > > I have the page from my owners manual in jpg format that lists all
>> > > the
>> > > lights on my 88 Cherokee. I could email it to you if you would like.
>> > >
>> > > The 2 lights for the heater control are #74's. I also doubt they are
>> > > both gone, it is usually the plug on them that comes loose or is
>> > > missed
>> > > when it's off.
>> > >
>> > > Mike
>> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > 88 Cherokee 235 BFG AT's
>> > > Canadian Off Road Trips Photos: Non members can still view!
>> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> > > (More Off Road album links at bottom of the view page)
>> > >
>> > > Clint wrote:
>> > >>
>> > >> Does anyone know how many bulbs I need? I'd like to find that out
>> > >> BEFORE
>> > >> I
>> > >> pull the dash! :) They indicate that you need 5, but the older ones
>> > >> may
>> > >> need more bulbs. Hmm, now that I think about it, it seems odd that
>> > >> all 5
>> > >> would burn out at once. Or is it possibly just one that burned out,
>> > >> screwing up the circuit for the rest? What is that, a serial
>> > >> circuit?
>> > >>
>> > >> And the page I posted indicated an L194 bulb, but that was for a
>> > >> 91-96
>> > >> Cherokee. Can anyone confirm the kind? I couldn't find it in the
>> > >> FSM.
>> > >>
>> > >> Clint
>> > >>
>> > >> "Clint" <nobody@nowhere.none> wrote in message
>> > >> news:6IdZg.159093$R63.94918@pd7urf1no...
>> > >> > Got in my truck to go to work this morning. Headlights came on
>> > >> > ok,
>> > >> > interior light... But no instrument panel lights.
>> > >> >
>> > >> > So I did some google searching, and found this link:
>> > >> > http://jeepwhitegauges.com/cher9196instructions.htm
>> > >> >
>> > >> > No affliation with the people doing it, but it looks pretty clear
>> > >> > on
>> > >> > how
>> > >> > to take it all apart. This is probably old news for many of you,
>> > >> > but
>> > >> > there's probably newbies like me that need it! :)
>> > >> >
>> > >> > Now if I could figure out how to replace the bulb for the
>> > >> > heater/fan
>> > >> > panel...
>> > >> >
>> > >> > Clint
>> > >> >
Guest
Posts: n/a
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
I have the same problem with my 88 Comanche - to the point of
finishing the last 100 miles of a long trip with a flashlight. I
changed the fuse and it worked for a while then started to being
intermittent again. AHA! corrosion in a connector - but where? In
the past, the simple resolution was the blasted dimmer rheostat on
the light switch but this time the dimmer was fine. I fought it for
quite a while then my emergency flashers quit and the brake lights got
flakey as well. If you look, the brake light and panel light fuses
are right together near the top of the fuse block so that focused
things for me. I took a can of WD-40, covered the floor with rags and
removed the fuses from the top right quadrant of the fuse block,
sprayed the whole thing (soaked it, actually) and used a toothbrush to
scrub the fuse panel as best I could. Inserted and removed the fuses
while it was still wet, then used the air hose to blow everything dry.
The sweet smell of WD-40 was annoying for a few days, but that seems
to have fixed things for a while - no problems for the last several
months. Probably waiting for a snowy, sub-zero day to act up again...
The next step is probably to pull the fuse panel and either replace it
or do a thorough clean up. I don't know about yours, but my fuse
panel could sure use a cover - I keep kicking it somehow and several
fuses always seem to have the plastic tops broken.
On Tue, 17 Oct 2006 23:39:35 UTC "Clint" <nobody@nowhere.none> wrote:
> Sorry, I could have mentioned my truck is an 88 Jeep Comanche.
>
> BTW, two weeks after swapping the coolant overflow tank, and no overheating
> *knock on wood*. Still choked about $100 for a plastic bottle, but hey, at
> least it solved the problem.
>
> Clint
>
> "Clint" <nobody@nowhere.none> wrote in message
> news:6IdZg.159093$R63.94918@pd7urf1no...
> > Got in my truck to go to work this morning. Headlights came on ok,
> > interior light... But no instrument panel lights.
> >
> > So I did some google searching, and found this link:
> > http://jeepwhitegauges.com/cher9196instructions.htm
> >
> > No affliation with the people doing it, but it looks pretty clear on how
> > to take it all apart. This is probably old news for many of you, but
> > there's probably newbies like me that need it! :)
> >
> > Now if I could figure out how to replace the bulb for the heater/fan
> > panel...
> >
> > Clint
> >
>
>
--
Will Honea
finishing the last 100 miles of a long trip with a flashlight. I
changed the fuse and it worked for a while then started to being
intermittent again. AHA! corrosion in a connector - but where? In
the past, the simple resolution was the blasted dimmer rheostat on
the light switch but this time the dimmer was fine. I fought it for
quite a while then my emergency flashers quit and the brake lights got
flakey as well. If you look, the brake light and panel light fuses
are right together near the top of the fuse block so that focused
things for me. I took a can of WD-40, covered the floor with rags and
removed the fuses from the top right quadrant of the fuse block,
sprayed the whole thing (soaked it, actually) and used a toothbrush to
scrub the fuse panel as best I could. Inserted and removed the fuses
while it was still wet, then used the air hose to blow everything dry.
The sweet smell of WD-40 was annoying for a few days, but that seems
to have fixed things for a while - no problems for the last several
months. Probably waiting for a snowy, sub-zero day to act up again...
The next step is probably to pull the fuse panel and either replace it
or do a thorough clean up. I don't know about yours, but my fuse
panel could sure use a cover - I keep kicking it somehow and several
fuses always seem to have the plastic tops broken.
On Tue, 17 Oct 2006 23:39:35 UTC "Clint" <nobody@nowhere.none> wrote:
> Sorry, I could have mentioned my truck is an 88 Jeep Comanche.
>
> BTW, two weeks after swapping the coolant overflow tank, and no overheating
> *knock on wood*. Still choked about $100 for a plastic bottle, but hey, at
> least it solved the problem.
>
> Clint
>
> "Clint" <nobody@nowhere.none> wrote in message
> news:6IdZg.159093$R63.94918@pd7urf1no...
> > Got in my truck to go to work this morning. Headlights came on ok,
> > interior light... But no instrument panel lights.
> >
> > So I did some google searching, and found this link:
> > http://jeepwhitegauges.com/cher9196instructions.htm
> >
> > No affliation with the people doing it, but it looks pretty clear on how
> > to take it all apart. This is probably old news for many of you, but
> > there's probably newbies like me that need it! :)
> >
> > Now if I could figure out how to replace the bulb for the heater/fan
> > panel...
> >
> > Clint
> >
>
>
--
Will Honea
Guest
Posts: n/a
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
I have the same problem with my 88 Comanche - to the point of
finishing the last 100 miles of a long trip with a flashlight. I
changed the fuse and it worked for a while then started to being
intermittent again. AHA! corrosion in a connector - but where? In
the past, the simple resolution was the blasted dimmer rheostat on
the light switch but this time the dimmer was fine. I fought it for
quite a while then my emergency flashers quit and the brake lights got
flakey as well. If you look, the brake light and panel light fuses
are right together near the top of the fuse block so that focused
things for me. I took a can of WD-40, covered the floor with rags and
removed the fuses from the top right quadrant of the fuse block,
sprayed the whole thing (soaked it, actually) and used a toothbrush to
scrub the fuse panel as best I could. Inserted and removed the fuses
while it was still wet, then used the air hose to blow everything dry.
The sweet smell of WD-40 was annoying for a few days, but that seems
to have fixed things for a while - no problems for the last several
months. Probably waiting for a snowy, sub-zero day to act up again...
The next step is probably to pull the fuse panel and either replace it
or do a thorough clean up. I don't know about yours, but my fuse
panel could sure use a cover - I keep kicking it somehow and several
fuses always seem to have the plastic tops broken.
On Tue, 17 Oct 2006 23:39:35 UTC "Clint" <nobody@nowhere.none> wrote:
> Sorry, I could have mentioned my truck is an 88 Jeep Comanche.
>
> BTW, two weeks after swapping the coolant overflow tank, and no overheating
> *knock on wood*. Still choked about $100 for a plastic bottle, but hey, at
> least it solved the problem.
>
> Clint
>
> "Clint" <nobody@nowhere.none> wrote in message
> news:6IdZg.159093$R63.94918@pd7urf1no...
> > Got in my truck to go to work this morning. Headlights came on ok,
> > interior light... But no instrument panel lights.
> >
> > So I did some google searching, and found this link:
> > http://jeepwhitegauges.com/cher9196instructions.htm
> >
> > No affliation with the people doing it, but it looks pretty clear on how
> > to take it all apart. This is probably old news for many of you, but
> > there's probably newbies like me that need it! :)
> >
> > Now if I could figure out how to replace the bulb for the heater/fan
> > panel...
> >
> > Clint
> >
>
>
--
Will Honea
finishing the last 100 miles of a long trip with a flashlight. I
changed the fuse and it worked for a while then started to being
intermittent again. AHA! corrosion in a connector - but where? In
the past, the simple resolution was the blasted dimmer rheostat on
the light switch but this time the dimmer was fine. I fought it for
quite a while then my emergency flashers quit and the brake lights got
flakey as well. If you look, the brake light and panel light fuses
are right together near the top of the fuse block so that focused
things for me. I took a can of WD-40, covered the floor with rags and
removed the fuses from the top right quadrant of the fuse block,
sprayed the whole thing (soaked it, actually) and used a toothbrush to
scrub the fuse panel as best I could. Inserted and removed the fuses
while it was still wet, then used the air hose to blow everything dry.
The sweet smell of WD-40 was annoying for a few days, but that seems
to have fixed things for a while - no problems for the last several
months. Probably waiting for a snowy, sub-zero day to act up again...
The next step is probably to pull the fuse panel and either replace it
or do a thorough clean up. I don't know about yours, but my fuse
panel could sure use a cover - I keep kicking it somehow and several
fuses always seem to have the plastic tops broken.
On Tue, 17 Oct 2006 23:39:35 UTC "Clint" <nobody@nowhere.none> wrote:
> Sorry, I could have mentioned my truck is an 88 Jeep Comanche.
>
> BTW, two weeks after swapping the coolant overflow tank, and no overheating
> *knock on wood*. Still choked about $100 for a plastic bottle, but hey, at
> least it solved the problem.
>
> Clint
>
> "Clint" <nobody@nowhere.none> wrote in message
> news:6IdZg.159093$R63.94918@pd7urf1no...
> > Got in my truck to go to work this morning. Headlights came on ok,
> > interior light... But no instrument panel lights.
> >
> > So I did some google searching, and found this link:
> > http://jeepwhitegauges.com/cher9196instructions.htm
> >
> > No affliation with the people doing it, but it looks pretty clear on how
> > to take it all apart. This is probably old news for many of you, but
> > there's probably newbies like me that need it! :)
> >
> > Now if I could figure out how to replace the bulb for the heater/fan
> > panel...
> >
> > Clint
> >
>
>
--
Will Honea
