|
Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
Got in my truck to go to work this morning. Headlights came on ok, interior
light... But no instrument panel lights. So I did some google searching, and found this link: http://jeepwhitegauges.com/cher9196instructions.htm No affliation with the people doing it, but it looks pretty clear on how to take it all apart. This is probably old news for many of you, but there's probably newbies like me that need it! :) Now if I could figure out how to replace the bulb for the heater/fan panel... Clint |
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
Sorry, I could have mentioned my truck is an 88 Jeep Comanche.
BTW, two weeks after swapping the coolant overflow tank, and no overheating *knock on wood*. Still choked about $100 for a plastic bottle, but hey, at least it solved the problem. Clint "Clint" <nobody@nowhere.none> wrote in message news:6IdZg.159093$R63.94918@pd7urf1no... > Got in my truck to go to work this morning. Headlights came on ok, > interior light... But no instrument panel lights. > > So I did some google searching, and found this link: > http://jeepwhitegauges.com/cher9196instructions.htm > > No affliation with the people doing it, but it looks pretty clear on how > to take it all apart. This is probably old news for many of you, but > there's probably newbies like me that need it! :) > > Now if I could figure out how to replace the bulb for the heater/fan > panel... > > Clint > |
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
Sorry, I could have mentioned my truck is an 88 Jeep Comanche.
BTW, two weeks after swapping the coolant overflow tank, and no overheating *knock on wood*. Still choked about $100 for a plastic bottle, but hey, at least it solved the problem. Clint "Clint" <nobody@nowhere.none> wrote in message news:6IdZg.159093$R63.94918@pd7urf1no... > Got in my truck to go to work this morning. Headlights came on ok, > interior light... But no instrument panel lights. > > So I did some google searching, and found this link: > http://jeepwhitegauges.com/cher9196instructions.htm > > No affliation with the people doing it, but it looks pretty clear on how > to take it all apart. This is probably old news for many of you, but > there's probably newbies like me that need it! :) > > Now if I could figure out how to replace the bulb for the heater/fan > panel... > > Clint > |
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
Sorry, I could have mentioned my truck is an 88 Jeep Comanche.
BTW, two weeks after swapping the coolant overflow tank, and no overheating *knock on wood*. Still choked about $100 for a plastic bottle, but hey, at least it solved the problem. Clint "Clint" <nobody@nowhere.none> wrote in message news:6IdZg.159093$R63.94918@pd7urf1no... > Got in my truck to go to work this morning. Headlights came on ok, > interior light... But no instrument panel lights. > > So I did some google searching, and found this link: > http://jeepwhitegauges.com/cher9196instructions.htm > > No affliation with the people doing it, but it looks pretty clear on how > to take it all apart. This is probably old news for many of you, but > there's probably newbies like me that need it! :) > > Now if I could figure out how to replace the bulb for the heater/fan > panel... > > Clint > |
Re: Just as an FYI, I was looking for info on how to replace the lightsin my instrument panel
Hi Clint,
Turn you light switch knob back away from the dome light to the instrument lights, which will light your hearter/fan switch. God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ Clint wrote: > > Got in my truck to go to work this morning. Headlights came on ok, interior > light... But no instrument panel lights. > > So I did some google searching, and found this link: > http://jeepwhitegauges.com/cher9196instructions.htm > > No affliation with the people doing it, but it looks pretty clear on how to > take it all apart. This is probably old news for many of you, but there's > probably newbies like me that need it! :) > > Now if I could figure out how to replace the bulb for the heater/fan > panel... > > Clint |
Re: Just as an FYI, I was looking for info on how to replace the lightsin my instrument panel
Hi Clint,
Turn you light switch knob back away from the dome light to the instrument lights, which will light your hearter/fan switch. God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ Clint wrote: > > Got in my truck to go to work this morning. Headlights came on ok, interior > light... But no instrument panel lights. > > So I did some google searching, and found this link: > http://jeepwhitegauges.com/cher9196instructions.htm > > No affliation with the people doing it, but it looks pretty clear on how to > take it all apart. This is probably old news for many of you, but there's > probably newbies like me that need it! :) > > Now if I could figure out how to replace the bulb for the heater/fan > panel... > > Clint |
Re: Just as an FYI, I was looking for info on how to replace the lightsin my instrument panel
Hi Clint,
Turn you light switch knob back away from the dome light to the instrument lights, which will light your hearter/fan switch. God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ Clint wrote: > > Got in my truck to go to work this morning. Headlights came on ok, interior > light... But no instrument panel lights. > > So I did some google searching, and found this link: > http://jeepwhitegauges.com/cher9196instructions.htm > > No affliation with the people doing it, but it looks pretty clear on how to > take it all apart. This is probably old news for many of you, but there's > probably newbies like me that need it! :) > > Now if I could figure out how to replace the bulb for the heater/fan > panel... > > Clint |
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
I think I tried rotating the knob fully both ways, but I'll check that out
tonight. In the past the knob seems to slide back towards the middle (dimming the lights), and I just have to crank it over again, but this morning it was right off, and no joy on adjusting. I had to turn on the interior lights a couple times on the way into work, so I could make sure I wasn't speeding! :) Thanks for the hint. Clint "L.W.(Bill) ------ III" <----------@cox.net> wrote in message news:453572D3.CE94FAE6@cox.net... > Hi Clint, > Turn you light switch knob back away from the dome light to the > instrument lights, which will light your hearter/fan switch. > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Clint wrote: >> >> Got in my truck to go to work this morning. Headlights came on ok, >> interior >> light... But no instrument panel lights. >> >> So I did some google searching, and found this link: >> http://jeepwhitegauges.com/cher9196instructions.htm >> >> No affliation with the people doing it, but it looks pretty clear on how >> to >> take it all apart. This is probably old news for many of you, but >> there's >> probably newbies like me that need it! :) >> >> Now if I could figure out how to replace the bulb for the heater/fan >> panel... >> >> Clint |
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
I think I tried rotating the knob fully both ways, but I'll check that out
tonight. In the past the knob seems to slide back towards the middle (dimming the lights), and I just have to crank it over again, but this morning it was right off, and no joy on adjusting. I had to turn on the interior lights a couple times on the way into work, so I could make sure I wasn't speeding! :) Thanks for the hint. Clint "L.W.(Bill) ------ III" <----------@cox.net> wrote in message news:453572D3.CE94FAE6@cox.net... > Hi Clint, > Turn you light switch knob back away from the dome light to the > instrument lights, which will light your hearter/fan switch. > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Clint wrote: >> >> Got in my truck to go to work this morning. Headlights came on ok, >> interior >> light... But no instrument panel lights. >> >> So I did some google searching, and found this link: >> http://jeepwhitegauges.com/cher9196instructions.htm >> >> No affliation with the people doing it, but it looks pretty clear on how >> to >> take it all apart. This is probably old news for many of you, but >> there's >> probably newbies like me that need it! :) >> >> Now if I could figure out how to replace the bulb for the heater/fan >> panel... >> >> Clint |
Re: Just as an FYI, I was looking for info on how to replace the lights in my instrument panel
I think I tried rotating the knob fully both ways, but I'll check that out
tonight. In the past the knob seems to slide back towards the middle (dimming the lights), and I just have to crank it over again, but this morning it was right off, and no joy on adjusting. I had to turn on the interior lights a couple times on the way into work, so I could make sure I wasn't speeding! :) Thanks for the hint. Clint "L.W.(Bill) ------ III" <----------@cox.net> wrote in message news:453572D3.CE94FAE6@cox.net... > Hi Clint, > Turn you light switch knob back away from the dome light to the > instrument lights, which will light your hearter/fan switch. > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Clint wrote: >> >> Got in my truck to go to work this morning. Headlights came on ok, >> interior >> light... But no instrument panel lights. >> >> So I did some google searching, and found this link: >> http://jeepwhitegauges.com/cher9196instructions.htm >> >> No affliation with the people doing it, but it looks pretty clear on how >> to >> take it all apart. This is probably old news for many of you, but >> there's >> probably newbies like me that need it! :) >> >> Now if I could figure out how to replace the bulb for the heater/fan >> panel... >> >> Clint |
| All times are GMT -4. The time now is 10:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands