Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
#11
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
What are you saying Bill!?
The 30-spline shafts should give him as close to the strength of the D44
without actually installing a D44. The Super35 axle shafts are a great buy
and a good investment for this guy.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112936E.62ABBB77@***.net...
> Eye ball the difference between a Dana 44 and 35 ring and pinion,
> then don't waste your money:
> http://www.jpmagazine.com/techarticles/16722/ Of course I could always
> use more pictures: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hello,
> > I currently have a dana 35c rear axle with 33" tires. Im adding a
> > powertrax no-slip locker into it soon. while im there i plan to
> > upgrade the axle shafts to 30 spline. I would like to know where on
> > the internet (or anywhere that delivers) i could find 30 spline axle
> > shafts for a dana 35c. I understand that superior has them, but i do
> > not want a detroit locker (its my daily driver) that is included with
> > a "super 35" kit. I also have heard of people here who have moser
> > shafts but i cant find them anywhere for the dana 35.
> >
> > Also, when installing the locker, will the old axle slide right out if
> > i pull the c-clips? Will they come out freely and would the 30 spline
> > shafts replace the same way easily?
> >
> > Thanks
> > Derek
The 30-spline shafts should give him as close to the strength of the D44
without actually installing a D44. The Super35 axle shafts are a great buy
and a good investment for this guy.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112936E.62ABBB77@***.net...
> Eye ball the difference between a Dana 44 and 35 ring and pinion,
> then don't waste your money:
> http://www.jpmagazine.com/techarticles/16722/ Of course I could always
> use more pictures: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hello,
> > I currently have a dana 35c rear axle with 33" tires. Im adding a
> > powertrax no-slip locker into it soon. while im there i plan to
> > upgrade the axle shafts to 30 spline. I would like to know where on
> > the internet (or anywhere that delivers) i could find 30 spline axle
> > shafts for a dana 35c. I understand that superior has them, but i do
> > not want a detroit locker (its my daily driver) that is included with
> > a "super 35" kit. I also have heard of people here who have moser
> > shafts but i cant find them anywhere for the dana 35.
> >
> > Also, when installing the locker, will the old axle slide right out if
> > i pull the c-clips? Will they come out freely and would the 30 spline
> > shafts replace the same way easily?
> >
> > Thanks
> > Derek
#12
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
What are you saying Bill!?
The 30-spline shafts should give him as close to the strength of the D44
without actually installing a D44. The Super35 axle shafts are a great buy
and a good investment for this guy.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112936E.62ABBB77@***.net...
> Eye ball the difference between a Dana 44 and 35 ring and pinion,
> then don't waste your money:
> http://www.jpmagazine.com/techarticles/16722/ Of course I could always
> use more pictures: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hello,
> > I currently have a dana 35c rear axle with 33" tires. Im adding a
> > powertrax no-slip locker into it soon. while im there i plan to
> > upgrade the axle shafts to 30 spline. I would like to know where on
> > the internet (or anywhere that delivers) i could find 30 spline axle
> > shafts for a dana 35c. I understand that superior has them, but i do
> > not want a detroit locker (its my daily driver) that is included with
> > a "super 35" kit. I also have heard of people here who have moser
> > shafts but i cant find them anywhere for the dana 35.
> >
> > Also, when installing the locker, will the old axle slide right out if
> > i pull the c-clips? Will they come out freely and would the 30 spline
> > shafts replace the same way easily?
> >
> > Thanks
> > Derek
The 30-spline shafts should give him as close to the strength of the D44
without actually installing a D44. The Super35 axle shafts are a great buy
and a good investment for this guy.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112936E.62ABBB77@***.net...
> Eye ball the difference between a Dana 44 and 35 ring and pinion,
> then don't waste your money:
> http://www.jpmagazine.com/techarticles/16722/ Of course I could always
> use more pictures: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hello,
> > I currently have a dana 35c rear axle with 33" tires. Im adding a
> > powertrax no-slip locker into it soon. while im there i plan to
> > upgrade the axle shafts to 30 spline. I would like to know where on
> > the internet (or anywhere that delivers) i could find 30 spline axle
> > shafts for a dana 35c. I understand that superior has them, but i do
> > not want a detroit locker (its my daily driver) that is included with
> > a "super 35" kit. I also have heard of people here who have moser
> > shafts but i cant find them anywhere for the dana 35.
> >
> > Also, when installing the locker, will the old axle slide right out if
> > i pull the c-clips? Will they come out freely and would the 30 spline
> > shafts replace the same way easily?
> >
> > Thanks
> > Derek
#13
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
What are you saying Bill!?
The 30-spline shafts should give him as close to the strength of the D44
without actually installing a D44. The Super35 axle shafts are a great buy
and a good investment for this guy.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112936E.62ABBB77@***.net...
> Eye ball the difference between a Dana 44 and 35 ring and pinion,
> then don't waste your money:
> http://www.jpmagazine.com/techarticles/16722/ Of course I could always
> use more pictures: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hello,
> > I currently have a dana 35c rear axle with 33" tires. Im adding a
> > powertrax no-slip locker into it soon. while im there i plan to
> > upgrade the axle shafts to 30 spline. I would like to know where on
> > the internet (or anywhere that delivers) i could find 30 spline axle
> > shafts for a dana 35c. I understand that superior has them, but i do
> > not want a detroit locker (its my daily driver) that is included with
> > a "super 35" kit. I also have heard of people here who have moser
> > shafts but i cant find them anywhere for the dana 35.
> >
> > Also, when installing the locker, will the old axle slide right out if
> > i pull the c-clips? Will they come out freely and would the 30 spline
> > shafts replace the same way easily?
> >
> > Thanks
> > Derek
The 30-spline shafts should give him as close to the strength of the D44
without actually installing a D44. The Super35 axle shafts are a great buy
and a good investment for this guy.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112936E.62ABBB77@***.net...
> Eye ball the difference between a Dana 44 and 35 ring and pinion,
> then don't waste your money:
> http://www.jpmagazine.com/techarticles/16722/ Of course I could always
> use more pictures: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hello,
> > I currently have a dana 35c rear axle with 33" tires. Im adding a
> > powertrax no-slip locker into it soon. while im there i plan to
> > upgrade the axle shafts to 30 spline. I would like to know where on
> > the internet (or anywhere that delivers) i could find 30 spline axle
> > shafts for a dana 35c. I understand that superior has them, but i do
> > not want a detroit locker (its my daily driver) that is included with
> > a "super 35" kit. I also have heard of people here who have moser
> > shafts but i cant find them anywhere for the dana 35.
> >
> > Also, when installing the locker, will the old axle slide right out if
> > i pull the c-clips? Will they come out freely and would the 30 spline
> > shafts replace the same way easily?
> >
> > Thanks
> > Derek
#14
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shaftsfor d35c?
Hi Jeff,
Which would you rather have?
http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
have to worry because you're stronger than a Dana 44:
http://www.----------.com/mirror/compareAMCdana.htm
God Bless America, ßill O|||||||O
mailto:--------------------
CRWLR wrote:
>
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great buy
> and a good investment for this guy.
Which would you rather have?
http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
have to worry because you're stronger than a Dana 44:
http://www.----------.com/mirror/compareAMCdana.htm
God Bless America, ßill O|||||||O
mailto:--------------------
CRWLR wrote:
>
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great buy
> and a good investment for this guy.
#15
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shaftsfor d35c?
Hi Jeff,
Which would you rather have?
http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
have to worry because you're stronger than a Dana 44:
http://www.----------.com/mirror/compareAMCdana.htm
God Bless America, ßill O|||||||O
mailto:--------------------
CRWLR wrote:
>
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great buy
> and a good investment for this guy.
Which would you rather have?
http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
have to worry because you're stronger than a Dana 44:
http://www.----------.com/mirror/compareAMCdana.htm
God Bless America, ßill O|||||||O
mailto:--------------------
CRWLR wrote:
>
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great buy
> and a good investment for this guy.
#16
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shaftsfor d35c?
Hi Jeff,
Which would you rather have?
http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
have to worry because you're stronger than a Dana 44:
http://www.----------.com/mirror/compareAMCdana.htm
God Bless America, ßill O|||||||O
mailto:--------------------
CRWLR wrote:
>
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great buy
> and a good investment for this guy.
Which would you rather have?
http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
have to worry because you're stronger than a Dana 44:
http://www.----------.com/mirror/compareAMCdana.htm
God Bless America, ßill O|||||||O
mailto:--------------------
CRWLR wrote:
>
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great buy
> and a good investment for this guy.
#17
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shaftsfor d35c?
Hi Jeff,
Which would you rather have?
http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
have to worry because you're stronger than a Dana 44:
http://www.----------.com/mirror/compareAMCdana.htm
God Bless America, ßill O|||||||O
mailto:--------------------
CRWLR wrote:
>
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great buy
> and a good investment for this guy.
Which would you rather have?
http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
have to worry because you're stronger than a Dana 44:
http://www.----------.com/mirror/compareAMCdana.htm
God Bless America, ßill O|||||||O
mailto:--------------------
CRWLR wrote:
>
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great buy
> and a good investment for this guy.
#18
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
I'd rather have the very best available, but sometimes I have ---- to work
with and have to make the best out of the situation at hand.
I think the OPs plan to put a 30-spline in is a good one. Not the best plan,
but a good one.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112B507.9ABD27F7@***.net...
> Hi Jeff,
> Which would you rather have?
> http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
> have to worry because you're stronger than a Dana 44:
> http://www.----------.com/mirror/compareAMCdana.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> CRWLR wrote:
> >
> > What are you saying Bill!?
> >
> > The 30-spline shafts should give him as close to the strength of the D44
> > without actually installing a D44. The Super35 axle shafts are a great
buy
> > and a good investment for this guy.
with and have to make the best out of the situation at hand.
I think the OPs plan to put a 30-spline in is a good one. Not the best plan,
but a good one.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112B507.9ABD27F7@***.net...
> Hi Jeff,
> Which would you rather have?
> http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
> have to worry because you're stronger than a Dana 44:
> http://www.----------.com/mirror/compareAMCdana.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> CRWLR wrote:
> >
> > What are you saying Bill!?
> >
> > The 30-spline shafts should give him as close to the strength of the D44
> > without actually installing a D44. The Super35 axle shafts are a great
buy
> > and a good investment for this guy.
#19
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
I'd rather have the very best available, but sometimes I have ---- to work
with and have to make the best out of the situation at hand.
I think the OPs plan to put a 30-spline in is a good one. Not the best plan,
but a good one.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112B507.9ABD27F7@***.net...
> Hi Jeff,
> Which would you rather have?
> http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
> have to worry because you're stronger than a Dana 44:
> http://www.----------.com/mirror/compareAMCdana.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> CRWLR wrote:
> >
> > What are you saying Bill!?
> >
> > The 30-spline shafts should give him as close to the strength of the D44
> > without actually installing a D44. The Super35 axle shafts are a great
buy
> > and a good investment for this guy.
with and have to make the best out of the situation at hand.
I think the OPs plan to put a 30-spline in is a good one. Not the best plan,
but a good one.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112B507.9ABD27F7@***.net...
> Hi Jeff,
> Which would you rather have?
> http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
> have to worry because you're stronger than a Dana 44:
> http://www.----------.com/mirror/compareAMCdana.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> CRWLR wrote:
> >
> > What are you saying Bill!?
> >
> > The 30-spline shafts should give him as close to the strength of the D44
> > without actually installing a D44. The Super35 axle shafts are a great
buy
> > and a good investment for this guy.
#20
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
I'd rather have the very best available, but sometimes I have ---- to work
with and have to make the best out of the situation at hand.
I think the OPs plan to put a 30-spline in is a good one. Not the best plan,
but a good one.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112B507.9ABD27F7@***.net...
> Hi Jeff,
> Which would you rather have?
> http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
> have to worry because you're stronger than a Dana 44:
> http://www.----------.com/mirror/compareAMCdana.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> CRWLR wrote:
> >
> > What are you saying Bill!?
> >
> > The 30-spline shafts should give him as close to the strength of the D44
> > without actually installing a D44. The Super35 axle shafts are a great
buy
> > and a good investment for this guy.
with and have to make the best out of the situation at hand.
I think the OPs plan to put a 30-spline in is a good one. Not the best plan,
but a good one.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112B507.9ABD27F7@***.net...
> Hi Jeff,
> Which would you rather have?
> http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
> have to worry because you're stronger than a Dana 44:
> http://www.----------.com/mirror/compareAMCdana.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> CRWLR wrote:
> >
> > What are you saying Bill!?
> >
> > The 30-spline shafts should give him as close to the strength of the D44
> > without actually installing a D44. The Super35 axle shafts are a great
buy
> > and a good investment for this guy.