Jeep CJ & YJ Wrangler Ultimate Locking Console
12-26-2005, 07:26 PM
#11
Guest
Posts: n/a
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
Not sure about a YJ, but that's the way it works in a CJ. It assumes no
other center console in place.
JimG
"JMax" wrote in message ...
>
> JimG wrote:
> > That's exactly like the one in my CJ. The bracket goes under the back
end
> > to level it out. Other than that, you screw it down to the floor.
> >
> > --
> > JimG
>
>
> JimG,
>
> Thanks for the prompt response. So this will console will fit in a 92
> Wrangler? I just drill holes in the floor of the jeep for the bracket
> and then through the console to the bracket in the back and in the
> front (of the console) through the floor?
>
> JMax
>
other center console in place.
JimG
"JMax" wrote in message ...
>
> JimG wrote:
> > That's exactly like the one in my CJ. The bracket goes under the back
end
> > to level it out. Other than that, you screw it down to the floor.
> >
> > --
> > JimG
>
>
> JimG,
>
> Thanks for the prompt response. So this will console will fit in a 92
> Wrangler? I just drill holes in the floor of the jeep for the bracket
> and then through the console to the bracket in the back and in the
> front (of the console) through the floor?
>
> JMax
>
12-26-2005, 07:26 PM
#12
Guest
Posts: n/a
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
Not sure about a YJ, but that's the way it works in a CJ. It assumes no
other center console in place.
JimG
"JMax" wrote in message ...
>
> JimG wrote:
> > That's exactly like the one in my CJ. The bracket goes under the back
end
> > to level it out. Other than that, you screw it down to the floor.
> >
> > --
> > JimG
>
>
> JimG,
>
> Thanks for the prompt response. So this will console will fit in a 92
> Wrangler? I just drill holes in the floor of the jeep for the bracket
> and then through the console to the bracket in the back and in the
> front (of the console) through the floor?
>
> JMax
>
other center console in place.
JimG
"JMax" wrote in message ...
>
> JimG wrote:
> > That's exactly like the one in my CJ. The bracket goes under the back
end
> > to level it out. Other than that, you screw it down to the floor.
> >
> > --
> > JimG
>
>
> JimG,
>
> Thanks for the prompt response. So this will console will fit in a 92
> Wrangler? I just drill holes in the floor of the jeep for the bracket
> and then through the console to the bracket in the back and in the
> front (of the console) through the floor?
>
> JMax
>
12-26-2005, 07:26 PM
#13
Guest
Posts: n/a
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
Not sure about a YJ, but that's the way it works in a CJ. It assumes no
other center console in place.
JimG
"JMax" wrote in message ...
>
> JimG wrote:
> > That's exactly like the one in my CJ. The bracket goes under the back
end
> > to level it out. Other than that, you screw it down to the floor.
> >
> > --
> > JimG
>
>
> JimG,
>
> Thanks for the prompt response. So this will console will fit in a 92
> Wrangler? I just drill holes in the floor of the jeep for the bracket
> and then through the console to the bracket in the back and in the
> front (of the console) through the floor?
>
> JMax
>
other center console in place.
JimG
"JMax" wrote in message ...
>
> JimG wrote:
> > That's exactly like the one in my CJ. The bracket goes under the back
end
> > to level it out. Other than that, you screw it down to the floor.
> >
> > --
> > JimG
>
>
> JimG,
>
> Thanks for the prompt response. So this will console will fit in a 92
> Wrangler? I just drill holes in the floor of the jeep for the bracket
> and then through the console to the bracket in the back and in the
> front (of the console) through the floor?
>
> JMax
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
