Jeep CJ & YJ Wrangler Ultimate Locking Console
Good Evening and Happy Holidays. I received a Jeep CJ & YJ Wrangler
Ultimate Locking Console Black for my 1992 Wrangler. However, it did not come with any installation instructions. It came with about 9 screws and a bracket and that's it? I believe the manufacturer is Smittybilt or Putland (same thing). Can anyone direct me to a .pdf or have any ideas? http://www.4wd.com/newsite/shop/prod....asp?pid=31501 |
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
Edit: Putland = Outland. Sorry.
|
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
Edit: Putland = Outland. Sorry.
|
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
Edit: Putland = Outland. Sorry.
|
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
That's exactly like the one in my CJ. The bracket goes under the back end
to level it out. Other than that, you screw it down to the floor. -- JimG 80' CJ-7 258 CID, HEI 4.56 Gears, Lock-Right F&R 35" BFG MT on 15x10 Centerlines D44 Rear, D30 Front. SOA Dana 300 w/4:1 & Currie twin sticks Warn X8000i w/ dual batteries 00' TJ Sport 4.0L, 5sp 4.56 Gears, TrueTrac rear 33" BFG AT on 15x8 Eagle Alloys D35 Rear, D30 Front. 3" Suspension Lift Warn X8000i "JMax" wrote in message ... > Good Evening and Happy Holidays. I received a Jeep CJ & YJ Wrangler > Ultimate Locking Console Black for my 1992 Wrangler. However, it did > not come with any installation instructions. It came with about 9 > screws and a bracket and that's it? I believe the manufacturer is > Smittybilt or Putland (same thing). > > Can anyone direct me to a .pdf or have any ideas? > > http://www.4wd.com/newsite/shop/prod....asp?pid=31501 > |
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
That's exactly like the one in my CJ. The bracket goes under the back end
to level it out. Other than that, you screw it down to the floor. -- JimG 80' CJ-7 258 CID, HEI 4.56 Gears, Lock-Right F&R 35" BFG MT on 15x10 Centerlines D44 Rear, D30 Front. SOA Dana 300 w/4:1 & Currie twin sticks Warn X8000i w/ dual batteries 00' TJ Sport 4.0L, 5sp 4.56 Gears, TrueTrac rear 33" BFG AT on 15x8 Eagle Alloys D35 Rear, D30 Front. 3" Suspension Lift Warn X8000i "JMax" wrote in message ... > Good Evening and Happy Holidays. I received a Jeep CJ & YJ Wrangler > Ultimate Locking Console Black for my 1992 Wrangler. However, it did > not come with any installation instructions. It came with about 9 > screws and a bracket and that's it? I believe the manufacturer is > Smittybilt or Putland (same thing). > > Can anyone direct me to a .pdf or have any ideas? > > http://www.4wd.com/newsite/shop/prod....asp?pid=31501 > |
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
That's exactly like the one in my CJ. The bracket goes under the back end
to level it out. Other than that, you screw it down to the floor. -- JimG 80' CJ-7 258 CID, HEI 4.56 Gears, Lock-Right F&R 35" BFG MT on 15x10 Centerlines D44 Rear, D30 Front. SOA Dana 300 w/4:1 & Currie twin sticks Warn X8000i w/ dual batteries 00' TJ Sport 4.0L, 5sp 4.56 Gears, TrueTrac rear 33" BFG AT on 15x8 Eagle Alloys D35 Rear, D30 Front. 3" Suspension Lift Warn X8000i "JMax" wrote in message ... > Good Evening and Happy Holidays. I received a Jeep CJ & YJ Wrangler > Ultimate Locking Console Black for my 1992 Wrangler. However, it did > not come with any installation instructions. It came with about 9 > screws and a bracket and that's it? I believe the manufacturer is > Smittybilt or Putland (same thing). > > Can anyone direct me to a .pdf or have any ideas? > > http://www.4wd.com/newsite/shop/prod....asp?pid=31501 > |
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
JimG wrote: > That's exactly like the one in my CJ. The bracket goes under the back end > to level it out. Other than that, you screw it down to the floor. > > -- > JimG JimG, Thanks for the prompt response. So this will console will fit in a 92 Wrangler? I just drill holes in the floor of the jeep for the bracket and then through the console to the bracket in the back and in the front (of the console) through the floor? JMax |
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
JimG wrote: > That's exactly like the one in my CJ. The bracket goes under the back end > to level it out. Other than that, you screw it down to the floor. > > -- > JimG JimG, Thanks for the prompt response. So this will console will fit in a 92 Wrangler? I just drill holes in the floor of the jeep for the bracket and then through the console to the bracket in the back and in the front (of the console) through the floor? JMax |
Re: Jeep CJ & YJ Wrangler Ultimate Locking Console
JimG wrote: > That's exactly like the one in my CJ. The bracket goes under the back end > to level it out. Other than that, you screw it down to the floor. > > -- > JimG JimG, Thanks for the prompt response. So this will console will fit in a 92 Wrangler? I just drill holes in the floor of the jeep for the bracket and then through the console to the bracket in the back and in the front (of the console) through the floor? JMax |
All times are GMT -4. The time now is 08:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands