Good Evening and Happy Holidays. I received a Jeep CJ & YJ Wrangler
Ultimate Locking Console Black for my 1992 Wrangler. However, it did
not come with any installation instructions. It came with about 9
screws and a bracket and that's it? I believe the manufacturer is
Smittybilt or Putland (same thing).

Can anyone direct me to a .pdf or have any ideas?

http://www.4wd.com/newsite/shop/prod....asp?pid=31501

 

Edit: Putland = Outland. Sorry.

 

Edit: Putland = Outland. Sorry.

 

Edit: Putland = Outland. Sorry.

 

That's exactly like the one in my CJ. The bracket goes under the back end
to level it out. Other than that, you screw it down to the floor.

--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries

00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i

"JMax" wrote in message ...
> Good Evening and Happy Holidays. I received a Jeep CJ & YJ Wrangler
> Ultimate Locking Console Black for my 1992 Wrangler. However, it did
> not come with any installation instructions. It came with about 9
> screws and a bracket and that's it? I believe the manufacturer is
> Smittybilt or Putland (same thing).
>
> Can anyone direct me to a .pdf or have any ideas?
>
> http://www.4wd.com/newsite/shop/prod....asp?pid=31501
>

 

That's exactly like the one in my CJ. The bracket goes under the back end
to level it out. Other than that, you screw it down to the floor.

--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries

00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i

"JMax" wrote in message ...
> Good Evening and Happy Holidays. I received a Jeep CJ & YJ Wrangler
> Ultimate Locking Console Black for my 1992 Wrangler. However, it did
> not come with any installation instructions. It came with about 9
> screws and a bracket and that's it? I believe the manufacturer is
> Smittybilt or Putland (same thing).
>
> Can anyone direct me to a .pdf or have any ideas?
>
> http://www.4wd.com/newsite/shop/prod....asp?pid=31501
>

 

That's exactly like the one in my CJ. The bracket goes under the back end
to level it out. Other than that, you screw it down to the floor.

--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries

00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i

"JMax" wrote in message ...
> Good Evening and Happy Holidays. I received a Jeep CJ & YJ Wrangler
> Ultimate Locking Console Black for my 1992 Wrangler. However, it did
> not come with any installation instructions. It came with about 9
> screws and a bracket and that's it? I believe the manufacturer is
> Smittybilt or Putland (same thing).
>
> Can anyone direct me to a .pdf or have any ideas?
>
> http://www.4wd.com/newsite/shop/prod....asp?pid=31501
>

 

JimG wrote:
> That's exactly like the one in my CJ. The bracket goes under the back end
> to level it out. Other than that, you screw it down to the floor.
>
> --
> JimG


JimG,

Thanks for the prompt response. So this will console will fit in a 92
Wrangler? I just drill holes in the floor of the jeep for the bracket
and then through the console to the bracket in the back and in the
front (of the console) through the floor?

JMax

 

JimG wrote:
> That's exactly like the one in my CJ. The bracket goes under the back end
> to level it out. Other than that, you screw it down to the floor.
>
> --
> JimG


JimG,

Thanks for the prompt response. So this will console will fit in a 92
Wrangler? I just drill holes in the floor of the jeep for the bracket
and then through the console to the bracket in the back and in the
front (of the console) through the floor?

JMax

 

JimG wrote:
> That's exactly like the one in my CJ. The bracket goes under the back end
> to level it out. Other than that, you screw it down to the floor.
>
> --
> JimG


JimG,

Thanks for the prompt response. So this will console will fit in a 92
Wrangler? I just drill holes in the floor of the jeep for the bracket
and then through the console to the bracket in the back and in the
front (of the console) through the floor?

JMax