How to remove padded dash?
Guest
Posts: n/a
Re: How to remove padded dash?
On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
> On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> following:
>
> >You need to get that windshield to fold down. Are you sure it's not just
> >the gasket along the bottom sticking?
>
> I got the dash off. *cough cough* The window still won't fold down.
> *ahem* The hinges don't look rusted... the gasket isn't sticking...
> please just trust me on this. I'm going to take plead the 5th from
> here on out concerning my windshield. Let's just say that the padded
> dash is out now and the windshield is not going anywhere anytime soon.
> *cough cough*
The 4 1/2" grinder with a cut-off wheel chucked in it is a fearsome tool?
> On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> following:
>
> >You need to get that windshield to fold down. Are you sure it's not just
> >the gasket along the bottom sticking?
>
> I got the dash off. *cough cough* The window still won't fold down.
> *ahem* The hinges don't look rusted... the gasket isn't sticking...
> please just trust me on this. I'm going to take plead the 5th from
> here on out concerning my windshield. Let's just say that the padded
> dash is out now and the windshield is not going anywhere anytime soon.
> *cough cough*
The 4 1/2" grinder with a cut-off wheel chucked in it is a fearsome tool?
Guest
Posts: n/a
Re: How to remove padded dash?
On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
> On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> following:
>
> >You need to get that windshield to fold down. Are you sure it's not just
> >the gasket along the bottom sticking?
>
> I got the dash off. *cough cough* The window still won't fold down.
> *ahem* The hinges don't look rusted... the gasket isn't sticking...
> please just trust me on this. I'm going to take plead the 5th from
> here on out concerning my windshield. Let's just say that the padded
> dash is out now and the windshield is not going anywhere anytime soon.
> *cough cough*
The 4 1/2" grinder with a cut-off wheel chucked in it is a fearsome tool?
> On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> following:
>
> >You need to get that windshield to fold down. Are you sure it's not just
> >the gasket along the bottom sticking?
>
> I got the dash off. *cough cough* The window still won't fold down.
> *ahem* The hinges don't look rusted... the gasket isn't sticking...
> please just trust me on this. I'm going to take plead the 5th from
> here on out concerning my windshield. Let's just say that the padded
> dash is out now and the windshield is not going anywhere anytime soon.
> *cough cough*
The 4 1/2" grinder with a cut-off wheel chucked in it is a fearsome tool?
Guest
Posts: n/a
Re: How to remove padded dash?
The wiring harness for the wiper motor could maybe be hanging up so the
windshield won't fold...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> following:
>
> >You need to get that windshield to fold down. Are you sure it's not just
> >the gasket along the bottom sticking?
>
> I got the dash off. *cough cough* The window still won't fold down.
> *ahem* The hinges don't look rusted... the gasket isn't sticking...
> please just trust me on this. I'm going to take plead the 5th from
> here on out concerning my windshield. Let's just say that the padded
> dash is out now and the windshield is not going anywhere anytime soon.
> *cough cough*
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
windshield won't fold...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> following:
>
> >You need to get that windshield to fold down. Are you sure it's not just
> >the gasket along the bottom sticking?
>
> I got the dash off. *cough cough* The window still won't fold down.
> *ahem* The hinges don't look rusted... the gasket isn't sticking...
> please just trust me on this. I'm going to take plead the 5th from
> here on out concerning my windshield. Let's just say that the padded
> dash is out now and the windshield is not going anywhere anytime soon.
> *cough cough*
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Guest
Posts: n/a
Re: How to remove padded dash?
The wiring harness for the wiper motor could maybe be hanging up so the
windshield won't fold...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> following:
>
> >You need to get that windshield to fold down. Are you sure it's not just
> >the gasket along the bottom sticking?
>
> I got the dash off. *cough cough* The window still won't fold down.
> *ahem* The hinges don't look rusted... the gasket isn't sticking...
> please just trust me on this. I'm going to take plead the 5th from
> here on out concerning my windshield. Let's just say that the padded
> dash is out now and the windshield is not going anywhere anytime soon.
> *cough cough*
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
windshield won't fold...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> following:
>
> >You need to get that windshield to fold down. Are you sure it's not just
> >the gasket along the bottom sticking?
>
> I got the dash off. *cough cough* The window still won't fold down.
> *ahem* The hinges don't look rusted... the gasket isn't sticking...
> please just trust me on this. I'm going to take plead the 5th from
> here on out concerning my windshield. Let's just say that the padded
> dash is out now and the windshield is not going anywhere anytime soon.
> *cough cough*
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Guest
Posts: n/a
Re: How to remove padded dash?
The wiring harness for the wiper motor could maybe be hanging up so the
windshield won't fold...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> following:
>
> >You need to get that windshield to fold down. Are you sure it's not just
> >the gasket along the bottom sticking?
>
> I got the dash off. *cough cough* The window still won't fold down.
> *ahem* The hinges don't look rusted... the gasket isn't sticking...
> please just trust me on this. I'm going to take plead the 5th from
> here on out concerning my windshield. Let's just say that the padded
> dash is out now and the windshield is not going anywhere anytime soon.
> *cough cough*
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
windshield won't fold...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> following:
>
> >You need to get that windshield to fold down. Are you sure it's not just
> >the gasket along the bottom sticking?
>
> I got the dash off. *cough cough* The window still won't fold down.
> *ahem* The hinges don't look rusted... the gasket isn't sticking...
> please just trust me on this. I'm going to take plead the 5th from
> here on out concerning my windshield. Let's just say that the padded
> dash is out now and the windshield is not going anywhere anytime soon.
> *cough cough*
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Guest
Posts: n/a
Wiper wiring routing, help? WAS: How to remove padded dash?
How does the wiper harness get behind the dash in the late 1970s CJs? I
just reinstalled my windshield frame on my new steel CJ-5 tub, got the
harness captured under a washer on the second screw over for the cowl
rubber, but just can't remember how it gets to the switch. Is there
supposed to be a hole in the cowl, or (as my vague memory suggests) does
it simply get pinched between the dash and cowl?
One again Mike Romain reads my mind and mentions something I've come to
the group to ask:
On or about Sat, 25 Oct 2003, Mike Romain of romainm@sympatico.ca wrote:
> The wiring harness for the wiper motor could maybe be hanging up so the
> windshield won't fold...
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> travis wrote:
> >
> > On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> > following:
> >
> > >You need to get that windshield to fold down. Are you sure it's not just
> > >the gasket along the bottom sticking?
> >
> > I got the dash off. *cough cough* The window still won't fold down.
> > *ahem* The hinges don't look rusted... the gasket isn't sticking...
> > please just trust me on this. I'm going to take plead the 5th from
> > here on out concerning my windshield. Let's just say that the padded
> > dash is out now and the windshield is not going anywhere anytime soon.
> > *cough cough*
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
--
"doing whatever it took to capture world marketing shares, even as far
as having multiple satellites circling the globe to ensure complete
coverage and maximum profit potential."
Tealady spills the beans on AFU's new business plan.
Guest
Posts: n/a
Wiper wiring routing, help? WAS: How to remove padded dash?
How does the wiper harness get behind the dash in the late 1970s CJs? I
just reinstalled my windshield frame on my new steel CJ-5 tub, got the
harness captured under a washer on the second screw over for the cowl
rubber, but just can't remember how it gets to the switch. Is there
supposed to be a hole in the cowl, or (as my vague memory suggests) does
it simply get pinched between the dash and cowl?
One again Mike Romain reads my mind and mentions something I've come to
the group to ask:
On or about Sat, 25 Oct 2003, Mike Romain of romainm@sympatico.ca wrote:
> The wiring harness for the wiper motor could maybe be hanging up so the
> windshield won't fold...
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> travis wrote:
> >
> > On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> > following:
> >
> > >You need to get that windshield to fold down. Are you sure it's not just
> > >the gasket along the bottom sticking?
> >
> > I got the dash off. *cough cough* The window still won't fold down.
> > *ahem* The hinges don't look rusted... the gasket isn't sticking...
> > please just trust me on this. I'm going to take plead the 5th from
> > here on out concerning my windshield. Let's just say that the padded
> > dash is out now and the windshield is not going anywhere anytime soon.
> > *cough cough*
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
--
"doing whatever it took to capture world marketing shares, even as far
as having multiple satellites circling the globe to ensure complete
coverage and maximum profit potential."
Tealady spills the beans on AFU's new business plan.
Guest
Posts: n/a
Wiper wiring routing, help? WAS: How to remove padded dash?
How does the wiper harness get behind the dash in the late 1970s CJs? I
just reinstalled my windshield frame on my new steel CJ-5 tub, got the
harness captured under a washer on the second screw over for the cowl
rubber, but just can't remember how it gets to the switch. Is there
supposed to be a hole in the cowl, or (as my vague memory suggests) does
it simply get pinched between the dash and cowl?
One again Mike Romain reads my mind and mentions something I've come to
the group to ask:
On or about Sat, 25 Oct 2003, Mike Romain of romainm@sympatico.ca wrote:
> The wiring harness for the wiper motor could maybe be hanging up so the
> windshield won't fold...
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> travis wrote:
> >
> > On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> > following:
> >
> > >You need to get that windshield to fold down. Are you sure it's not just
> > >the gasket along the bottom sticking?
> >
> > I got the dash off. *cough cough* The window still won't fold down.
> > *ahem* The hinges don't look rusted... the gasket isn't sticking...
> > please just trust me on this. I'm going to take plead the 5th from
> > here on out concerning my windshield. Let's just say that the padded
> > dash is out now and the windshield is not going anywhere anytime soon.
> > *cough cough*
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
--
"doing whatever it took to capture world marketing shares, even as far
as having multiple satellites circling the globe to ensure complete
coverage and maximum profit potential."
Tealady spills the beans on AFU's new business plan.
Guest
Posts: n/a
Re: Wiper wiring routing, help? WAS: How to remove padded dash?
;-)
There is an oval slot in the top of the cowl that the plug and harness
fit through just inboard of the front clamps. You have to lower the
windshield to get to it.
Mike
Lee Ayrton wrote:
>
> How does the wiper harness get behind the dash in the late 1970s CJs? I
> just reinstalled my windshield frame on my new steel CJ-5 tub, got the
> harness captured under a washer on the second screw over for the cowl
> rubber, but just can't remember how it gets to the switch. Is there
> supposed to be a hole in the cowl, or (as my vague memory suggests) does
> it simply get pinched between the dash and cowl?
>
> One again Mike Romain reads my mind and mentions something I've come to
> the group to ask:
>
> On or about Sat, 25 Oct 2003, Mike Romain of romainm@sympatico.ca wrote:
>
> > The wiring harness for the wiper motor could maybe be hanging up so the
> > windshield won't fold...
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > travis wrote:
> > >
> > > On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> > > following:
> > >
> > > >You need to get that windshield to fold down. Are you sure it's not just
> > > >the gasket along the bottom sticking?
> > >
> > > I got the dash off. *cough cough* The window still won't fold down.
> > > *ahem* The hinges don't look rusted... the gasket isn't sticking...
> > > please just trust me on this. I'm going to take plead the 5th from
> > > here on out concerning my windshield. Let's just say that the padded
> > > dash is out now and the windshield is not going anywhere anytime soon.
> > > *cough cough*
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
>
> --
> "doing whatever it took to capture world marketing shares, even as far
> as having multiple satellites circling the globe to ensure complete
> coverage and maximum profit potential."
>
> Tealady spills the beans on AFU's new business plan.
There is an oval slot in the top of the cowl that the plug and harness
fit through just inboard of the front clamps. You have to lower the
windshield to get to it.
Mike
Lee Ayrton wrote:
>
> How does the wiper harness get behind the dash in the late 1970s CJs? I
> just reinstalled my windshield frame on my new steel CJ-5 tub, got the
> harness captured under a washer on the second screw over for the cowl
> rubber, but just can't remember how it gets to the switch. Is there
> supposed to be a hole in the cowl, or (as my vague memory suggests) does
> it simply get pinched between the dash and cowl?
>
> One again Mike Romain reads my mind and mentions something I've come to
> the group to ask:
>
> On or about Sat, 25 Oct 2003, Mike Romain of romainm@sympatico.ca wrote:
>
> > The wiring harness for the wiper motor could maybe be hanging up so the
> > windshield won't fold...
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > travis wrote:
> > >
> > > On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> > > following:
> > >
> > > >You need to get that windshield to fold down. Are you sure it's not just
> > > >the gasket along the bottom sticking?
> > >
> > > I got the dash off. *cough cough* The window still won't fold down.
> > > *ahem* The hinges don't look rusted... the gasket isn't sticking...
> > > please just trust me on this. I'm going to take plead the 5th from
> > > here on out concerning my windshield. Let's just say that the padded
> > > dash is out now and the windshield is not going anywhere anytime soon.
> > > *cough cough*
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
>
> --
> "doing whatever it took to capture world marketing shares, even as far
> as having multiple satellites circling the globe to ensure complete
> coverage and maximum profit potential."
>
> Tealady spills the beans on AFU's new business plan.
Guest
Posts: n/a
Re: Wiper wiring routing, help? WAS: How to remove padded dash?
;-)
There is an oval slot in the top of the cowl that the plug and harness
fit through just inboard of the front clamps. You have to lower the
windshield to get to it.
Mike
Lee Ayrton wrote:
>
> How does the wiper harness get behind the dash in the late 1970s CJs? I
> just reinstalled my windshield frame on my new steel CJ-5 tub, got the
> harness captured under a washer on the second screw over for the cowl
> rubber, but just can't remember how it gets to the switch. Is there
> supposed to be a hole in the cowl, or (as my vague memory suggests) does
> it simply get pinched between the dash and cowl?
>
> One again Mike Romain reads my mind and mentions something I've come to
> the group to ask:
>
> On or about Sat, 25 Oct 2003, Mike Romain of romainm@sympatico.ca wrote:
>
> > The wiring harness for the wiper motor could maybe be hanging up so the
> > windshield won't fold...
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > travis wrote:
> > >
> > > On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> > > following:
> > >
> > > >You need to get that windshield to fold down. Are you sure it's not just
> > > >the gasket along the bottom sticking?
> > >
> > > I got the dash off. *cough cough* The window still won't fold down.
> > > *ahem* The hinges don't look rusted... the gasket isn't sticking...
> > > please just trust me on this. I'm going to take plead the 5th from
> > > here on out concerning my windshield. Let's just say that the padded
> > > dash is out now and the windshield is not going anywhere anytime soon.
> > > *cough cough*
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
>
> --
> "doing whatever it took to capture world marketing shares, even as far
> as having multiple satellites circling the globe to ensure complete
> coverage and maximum profit potential."
>
> Tealady spills the beans on AFU's new business plan.
There is an oval slot in the top of the cowl that the plug and harness
fit through just inboard of the front clamps. You have to lower the
windshield to get to it.
Mike
Lee Ayrton wrote:
>
> How does the wiper harness get behind the dash in the late 1970s CJs? I
> just reinstalled my windshield frame on my new steel CJ-5 tub, got the
> harness captured under a washer on the second screw over for the cowl
> rubber, but just can't remember how it gets to the switch. Is there
> supposed to be a hole in the cowl, or (as my vague memory suggests) does
> it simply get pinched between the dash and cowl?
>
> One again Mike Romain reads my mind and mentions something I've come to
> the group to ask:
>
> On or about Sat, 25 Oct 2003, Mike Romain of romainm@sympatico.ca wrote:
>
> > The wiring harness for the wiper motor could maybe be hanging up so the
> > windshield won't fold...
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > travis wrote:
> > >
> > > On Fri, 24 Oct 2003 18:09:31 GMT, "JimG" <jimg@cj7.com> shared the
> > > following:
> > >
> > > >You need to get that windshield to fold down. Are you sure it's not just
> > > >the gasket along the bottom sticking?
> > >
> > > I got the dash off. *cough cough* The window still won't fold down.
> > > *ahem* The hinges don't look rusted... the gasket isn't sticking...
> > > please just trust me on this. I'm going to take plead the 5th from
> > > here on out concerning my windshield. Let's just say that the padded
> > > dash is out now and the windshield is not going anywhere anytime soon.
> > > *cough cough*
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
>
> --
> "doing whatever it took to capture world marketing shares, even as far
> as having multiple satellites circling the globe to ensure complete
> coverage and maximum profit potential."
>
> Tealady spills the beans on AFU's new business plan.
