How to remove padded dash?
 

Please take a look at this picture:
http://jeepadventures.dyndns.org/jeep/dayone/06.jpg
I need to remove that padded dash in order to paint the console.
There are 4 sheet-metal screws along the bottom edge of it. If I
remove those 4 screws, it feels as if though there is still something
holding that dash in place. Is there some kind of trick to removing
the dash after taking out those four screws? It kinda moves some
after the screws are out, but it's hanging up on something. I can't
see behind it to tell for sure if it's just glued in there or
something. Ideas? Also, I'm told that this dash is not stock on a
'76 Jeep. Does anyone have a picture of a stock '76 CJ5 dash? Or of
a stock CJ dash that would look the same as my '76 should? Thank you.



--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!

Re: How to remove padded dash?
 

There are some screws under the windshield. You have to fold the windshield
down to get at these screws.



"travis" <travist34removethis@hotmail.com> wrote in message
news:95oipv09v33n6nc1omjibi44ncppff33m6@4ax.com...
> Please take a look at this picture:
> http://jeepadventures.dyndns.org/jeep/dayone/06.jpg
> I need to remove that padded dash in order to paint the console.
> There are 4 sheet-metal screws along the bottom edge of it. If I
> remove those 4 screws, it feels as if though there is still something
> holding that dash in place. Is there some kind of trick to removing
> the dash after taking out those four screws? It kinda moves some
> after the screws are out, but it's hanging up on something. I can't
> see behind it to tell for sure if it's just glued in there or
> something. Ideas? Also, I'm told that this dash is not stock on a
> '76 Jeep. Does anyone have a picture of a stock '76 CJ5 dash? Or of
> a stock CJ dash that would look the same as my '76 should? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!

Re: How to remove padded dash?
 

There are some screws under the windshield. You have to fold the windshield
down to get at these screws.



"travis" <travist34removethis@hotmail.com> wrote in message
news:95oipv09v33n6nc1omjibi44ncppff33m6@4ax.com...
> Please take a look at this picture:
> http://jeepadventures.dyndns.org/jeep/dayone/06.jpg
> I need to remove that padded dash in order to paint the console.
> There are 4 sheet-metal screws along the bottom edge of it. If I
> remove those 4 screws, it feels as if though there is still something
> holding that dash in place. Is there some kind of trick to removing
> the dash after taking out those four screws? It kinda moves some
> after the screws are out, but it's hanging up on something. I can't
> see behind it to tell for sure if it's just glued in there or
> something. Ideas? Also, I'm told that this dash is not stock on a
> '76 Jeep. Does anyone have a picture of a stock '76 CJ5 dash? Or of
> a stock CJ dash that would look the same as my '76 should? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!

Re: How to remove padded dash?
 

There are some screws under the windshield. You have to fold the windshield
down to get at these screws.



"travis" <travist34removethis@hotmail.com> wrote in message
news:95oipv09v33n6nc1omjibi44ncppff33m6@4ax.com...
> Please take a look at this picture:
> http://jeepadventures.dyndns.org/jeep/dayone/06.jpg
> I need to remove that padded dash in order to paint the console.
> There are 4 sheet-metal screws along the bottom edge of it. If I
> remove those 4 screws, it feels as if though there is still something
> holding that dash in place. Is there some kind of trick to removing
> the dash after taking out those four screws? It kinda moves some
> after the screws are out, but it's hanging up on something. I can't
> see behind it to tell for sure if it's just glued in there or
> something. Ideas? Also, I'm told that this dash is not stock on a
> '76 Jeep. Does anyone have a picture of a stock '76 CJ5 dash? Or of
> a stock CJ dash that would look the same as my '76 should? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!

Re: How to remove padded dash?
 

The rest are under the windshield that won't fold down...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

travis wrote:
>
> Please take a look at this picture:
> http://jeepadventures.dyndns.org/jeep/dayone/06.jpg
> I need to remove that padded dash in order to paint the console.
> There are 4 sheet-metal screws along the bottom edge of it. If I
> remove those 4 screws, it feels as if though there is still something
> holding that dash in place. Is there some kind of trick to removing
> the dash after taking out those four screws? It kinda moves some
> after the screws are out, but it's hanging up on something. I can't
> see behind it to tell for sure if it's just glued in there or
> something. Ideas? Also, I'm told that this dash is not stock on a
> '76 Jeep. Does anyone have a picture of a stock '76 CJ5 dash? Or of
> a stock CJ dash that would look the same as my '76 should? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!

Re: How to remove padded dash?
 

The rest are under the windshield that won't fold down...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

travis wrote:
>
> Please take a look at this picture:
> http://jeepadventures.dyndns.org/jeep/dayone/06.jpg
> I need to remove that padded dash in order to paint the console.
> There are 4 sheet-metal screws along the bottom edge of it. If I
> remove those 4 screws, it feels as if though there is still something
> holding that dash in place. Is there some kind of trick to removing
> the dash after taking out those four screws? It kinda moves some
> after the screws are out, but it's hanging up on something. I can't
> see behind it to tell for sure if it's just glued in there or
> something. Ideas? Also, I'm told that this dash is not stock on a
> '76 Jeep. Does anyone have a picture of a stock '76 CJ5 dash? Or of
> a stock CJ dash that would look the same as my '76 should? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!

Re: How to remove padded dash?
 

The rest are under the windshield that won't fold down...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

travis wrote:
>
> Please take a look at this picture:
> http://jeepadventures.dyndns.org/jeep/dayone/06.jpg
> I need to remove that padded dash in order to paint the console.
> There are 4 sheet-metal screws along the bottom edge of it. If I
> remove those 4 screws, it feels as if though there is still something
> holding that dash in place. Is there some kind of trick to removing
> the dash after taking out those four screws? It kinda moves some
> after the screws are out, but it's hanging up on something. I can't
> see behind it to tell for sure if it's just glued in there or
> something. Ideas? Also, I'm told that this dash is not stock on a
> '76 Jeep. Does anyone have a picture of a stock '76 CJ5 dash? Or of
> a stock CJ dash that would look the same as my '76 should? Thank you.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!

Re: How to remove padded dash?
 

On Fri, 24 Oct 2003 13:46:43 -0400, Mike Romain
<romainm@sympatico.ca> shared the following:

>The rest are under the windshield that won't fold down...
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's

And so it begins... *grinding teeth together* :-)

>
>travis wrote:
>>
>> Please take a look at this picture:
>> http://jeepadventures.dyndns.org/jeep/dayone/06.jpg
>> I need to remove that padded dash in order to paint the console.
>> There are 4 sheet-metal screws along the bottom edge of it. If I
>> remove those 4 screws, it feels as if though there is still something
>> holding that dash in place. Is there some kind of trick to removing
>> the dash after taking out those four screws? It kinda moves some
>> after the screws are out, but it's hanging up on something. I can't
>> see behind it to tell for sure if it's just glued in there or
>> something. Ideas? Also, I'm told that this dash is not stock on a
>> '76 Jeep. Does anyone have a picture of a stock '76 CJ5 dash? Or of
>> a stock CJ dash that would look the same as my '76 should? Thank you.
>>
>>
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!


--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!

Re: How to remove padded dash?
 

On Fri, 24 Oct 2003 13:46:43 -0400, Mike Romain
<romainm@sympatico.ca> shared the following:

>The rest are under the windshield that won't fold down...
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's

And so it begins... *grinding teeth together* :-)

>
>travis wrote:
>>
>> Please take a look at this picture:
>> http://jeepadventures.dyndns.org/jeep/dayone/06.jpg
>> I need to remove that padded dash in order to paint the console.
>> There are 4 sheet-metal screws along the bottom edge of it. If I
>> remove those 4 screws, it feels as if though there is still something
>> holding that dash in place. Is there some kind of trick to removing
>> the dash after taking out those four screws? It kinda moves some
>> after the screws are out, but it's hanging up on something. I can't
>> see behind it to tell for sure if it's just glued in there or
>> something. Ideas? Also, I'm told that this dash is not stock on a
>> '76 Jeep. Does anyone have a picture of a stock '76 CJ5 dash? Or of
>> a stock CJ dash that would look the same as my '76 should? Thank you.
>>
>>
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!


--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!

Re: How to remove padded dash?
 

On Fri, 24 Oct 2003 13:46:43 -0400, Mike Romain
<romainm@sympatico.ca> shared the following:

>The rest are under the windshield that won't fold down...
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's

And so it begins... *grinding teeth together* :-)

>
>travis wrote:
>>
>> Please take a look at this picture:
>> http://jeepadventures.dyndns.org/jeep/dayone/06.jpg
>> I need to remove that padded dash in order to paint the console.
>> There are 4 sheet-metal screws along the bottom edge of it. If I
>> remove those 4 screws, it feels as if though there is still something
>> holding that dash in place. Is there some kind of trick to removing
>> the dash after taking out those four screws? It kinda moves some
>> after the screws are out, but it's hanging up on something. I can't
>> see behind it to tell for sure if it's just glued in there or
>> something. Ideas? Also, I'm told that this dash is not stock on a
>> '76 Jeep. Does anyone have a picture of a stock '76 CJ5 dash? Or of
>> a stock CJ dash that would look the same as my '76 should? Thank you.
>>
>>
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!


--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!