How to Change right front turn signal bulb on 98GC
Guest
Posts: n/a
Re: How to Change right front turn signal bulb on 98GC
Bookmark: http://www.wjjeeps.com/jmenu.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Cappy2112 wrote:
>
> Great
> Thank you !!
>
> Any idea how to get the speaker grills off of the front Left & Right
> speakers?
> I have the Infinity Gold system- and I think my speakers are shot or
> the crossover is fried.
>
> Do I have to take the door panel off ?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Cappy2112 wrote:
>
> Great
> Thank you !!
>
> Any idea how to get the speaker grills off of the front Left & Right
> speakers?
> I have the Infinity Gold system- and I think my speakers are shot or
> the crossover is fried.
>
> Do I have to take the door panel off ?
Guest
Posts: n/a
Re: How to Change right front turn signal bulb on 98GC
Bookmark: http://www.wjjeeps.com/jmenu.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Cappy2112 wrote:
>
> Great
> Thank you !!
>
> Any idea how to get the speaker grills off of the front Left & Right
> speakers?
> I have the Infinity Gold system- and I think my speakers are shot or
> the crossover is fried.
>
> Do I have to take the door panel off ?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Cappy2112 wrote:
>
> Great
> Thank you !!
>
> Any idea how to get the speaker grills off of the front Left & Right
> speakers?
> I have the Infinity Gold system- and I think my speakers are shot or
> the crossover is fried.
>
> Do I have to take the door panel off ?
Guest
Posts: n/a
Re: How to Change right front turn signal bulb on 98GC
Bookmark: http://www.wjjeeps.com/jmenu.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Cappy2112 wrote:
>
> Great
> Thank you !!
>
> Any idea how to get the speaker grills off of the front Left & Right
> speakers?
> I have the Infinity Gold system- and I think my speakers are shot or
> the crossover is fried.
>
> Do I have to take the door panel off ?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Cappy2112 wrote:
>
> Great
> Thank you !!
>
> Any idea how to get the speaker grills off of the front Left & Right
> speakers?
> I have the Infinity Gold system- and I think my speakers are shot or
> the crossover is fried.
>
> Do I have to take the door panel off ?
Guest
Posts: n/a
Re: How to Change right front turn signal bulb on 98GC
Thanks again- but do you have any references for 98 Jeeps ?
This page is for 99 and onward, and the headlamp assy is quite
different.
My headlamp only has 1 bulb, not the 5 as in the picture.
As such, now I have the headlamp out, the turn signal (which is what
needs to be replaced) is in the wraparound assembly, again, with no
visible screws/fasteners.
This is what needs to come out, so I can replace the turn signal bulb
L.W.(Bill) ------ III wrote:
> Bookmark: http://www.wjjeeps.com/jmenu.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Great
> > Thank you !!
> >
> > Any idea how to get the speaker grills off of the front Left & Right
> > speakers?
> > I have the Infinity Gold system- and I think my speakers are shot or
> > the crossover is fried.
> >
> > Do I have to take the door panel off ?
Guest
Posts: n/a
Re: How to Change right front turn signal bulb on 98GC
Thanks again- but do you have any references for 98 Jeeps ?
This page is for 99 and onward, and the headlamp assy is quite
different.
My headlamp only has 1 bulb, not the 5 as in the picture.
As such, now I have the headlamp out, the turn signal (which is what
needs to be replaced) is in the wraparound assembly, again, with no
visible screws/fasteners.
This is what needs to come out, so I can replace the turn signal bulb
L.W.(Bill) ------ III wrote:
> Bookmark: http://www.wjjeeps.com/jmenu.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Great
> > Thank you !!
> >
> > Any idea how to get the speaker grills off of the front Left & Right
> > speakers?
> > I have the Infinity Gold system- and I think my speakers are shot or
> > the crossover is fried.
> >
> > Do I have to take the door panel off ?
Guest
Posts: n/a
Re: How to Change right front turn signal bulb on 98GC
Thanks again- but do you have any references for 98 Jeeps ?
This page is for 99 and onward, and the headlamp assy is quite
different.
My headlamp only has 1 bulb, not the 5 as in the picture.
As such, now I have the headlamp out, the turn signal (which is what
needs to be replaced) is in the wraparound assembly, again, with no
visible screws/fasteners.
This is what needs to come out, so I can replace the turn signal bulb
L.W.(Bill) ------ III wrote:
> Bookmark: http://www.wjjeeps.com/jmenu.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Great
> > Thank you !!
> >
> > Any idea how to get the speaker grills off of the front Left & Right
> > speakers?
> > I have the Infinity Gold system- and I think my speakers are shot or
> > the crossover is fried.
> >
> > Do I have to take the door panel off ?
Guest
Posts: n/a
Re: How to Change right front turn signal bulb on 98GC
The post that followed Bill's probably answered your question and is
complete with pix!
Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
> Can anyone help with finding the right-front turn signal bulb and
how
> to replace it ?
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
Then carefully remove the lower screw by inserting a thin phillips
driver here
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
"Cappy2112" <cappy2112@gmail.com> wrote in message
news:1149267997.688340.118350@y43g2000cwc.googlegr oups.com...
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
>
> L.W.(Bill) ------ III wrote:
>> Bookmark: http://www.wjjeeps.com/jmenu.htm
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Cappy2112 wrote:
>> >
>> > Great
>> > Thank you !!
>> >
>> > Any idea how to get the speaker grills off of the front Left & Right
>> > speakers?
>> > I have the Infinity Gold system- and I think my speakers are shot or
>> > the crossover is fried.
>> >
>> > Do I have to take the door panel off ?
>
complete with pix!
Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
> Can anyone help with finding the right-front turn signal bulb and
how
> to replace it ?
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
Then carefully remove the lower screw by inserting a thin phillips
driver here
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
"Cappy2112" <cappy2112@gmail.com> wrote in message
news:1149267997.688340.118350@y43g2000cwc.googlegr oups.com...
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
>
> L.W.(Bill) ------ III wrote:
>> Bookmark: http://www.wjjeeps.com/jmenu.htm
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Cappy2112 wrote:
>> >
>> > Great
>> > Thank you !!
>> >
>> > Any idea how to get the speaker grills off of the front Left & Right
>> > speakers?
>> > I have the Infinity Gold system- and I think my speakers are shot or
>> > the crossover is fried.
>> >
>> > Do I have to take the door panel off ?
>
Guest
Posts: n/a
Re: How to Change right front turn signal bulb on 98GC
The post that followed Bill's probably answered your question and is
complete with pix!
Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
> Can anyone help with finding the right-front turn signal bulb and
how
> to replace it ?
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
Then carefully remove the lower screw by inserting a thin phillips
driver here
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
"Cappy2112" <cappy2112@gmail.com> wrote in message
news:1149267997.688340.118350@y43g2000cwc.googlegr oups.com...
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
>
> L.W.(Bill) ------ III wrote:
>> Bookmark: http://www.wjjeeps.com/jmenu.htm
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Cappy2112 wrote:
>> >
>> > Great
>> > Thank you !!
>> >
>> > Any idea how to get the speaker grills off of the front Left & Right
>> > speakers?
>> > I have the Infinity Gold system- and I think my speakers are shot or
>> > the crossover is fried.
>> >
>> > Do I have to take the door panel off ?
>
complete with pix!
Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
> Can anyone help with finding the right-front turn signal bulb and
how
> to replace it ?
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
Then carefully remove the lower screw by inserting a thin phillips
driver here
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
"Cappy2112" <cappy2112@gmail.com> wrote in message
news:1149267997.688340.118350@y43g2000cwc.googlegr oups.com...
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
>
> L.W.(Bill) ------ III wrote:
>> Bookmark: http://www.wjjeeps.com/jmenu.htm
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Cappy2112 wrote:
>> >
>> > Great
>> > Thank you !!
>> >
>> > Any idea how to get the speaker grills off of the front Left & Right
>> > speakers?
>> > I have the Infinity Gold system- and I think my speakers are shot or
>> > the crossover is fried.
>> >
>> > Do I have to take the door panel off ?
>
Guest
Posts: n/a
Re: How to Change right front turn signal bulb on 98GC
The post that followed Bill's probably answered your question and is
complete with pix!
Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
> Can anyone help with finding the right-front turn signal bulb and
how
> to replace it ?
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
Then carefully remove the lower screw by inserting a thin phillips
driver here
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
"Cappy2112" <cappy2112@gmail.com> wrote in message
news:1149267997.688340.118350@y43g2000cwc.googlegr oups.com...
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
>
> L.W.(Bill) ------ III wrote:
>> Bookmark: http://www.wjjeeps.com/jmenu.htm
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Cappy2112 wrote:
>> >
>> > Great
>> > Thank you !!
>> >
>> > Any idea how to get the speaker grills off of the front Left & Right
>> > speakers?
>> > I have the Infinity Gold system- and I think my speakers are shot or
>> > the crossover is fried.
>> >
>> > Do I have to take the door panel off ?
>
complete with pix!
Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
> Can anyone help with finding the right-front turn signal bulb and
how
> to replace it ?
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
Then carefully remove the lower screw by inserting a thin phillips
driver here
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
"Cappy2112" <cappy2112@gmail.com> wrote in message
news:1149267997.688340.118350@y43g2000cwc.googlegr oups.com...
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
>
> L.W.(Bill) ------ III wrote:
>> Bookmark: http://www.wjjeeps.com/jmenu.htm
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Cappy2112 wrote:
>> >
>> > Great
>> > Thank you !!
>> >
>> > Any idea how to get the speaker grills off of the front Left & Right
>> > speakers?
>> > I have the Infinity Gold system- and I think my speakers are shot or
>> > the crossover is fried.
>> >
>> > Do I have to take the door panel off ?
>
Guest
Posts: n/a
Re: How to Change right front turn signal bulb on 98GC
Sorry.
Like Bill said, use the the '93's instructions by Doug:
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
-DougW
--
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Cappy2112 wrote:
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
> L.W.(Bill) ------ III wrote:
> > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > God Bless America, Bill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Cappy2112 wrote:
> > >
> > > Great
> > > Thank you !!
> > >
> > > Any idea how to get the speaker grills off of the front Left & Right
> > > speakers?
> > > I have the Infinity Gold system- and I think my speakers are shot or
> > > the crossover is fried.
> > >
> > > Do I have to take the door panel off ?
Like Bill said, use the the '93's instructions by Doug:
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
-DougW
--
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Cappy2112 wrote:
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
> L.W.(Bill) ------ III wrote:
> > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > God Bless America, Bill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Cappy2112 wrote:
> > >
> > > Great
> > > Thank you !!
> > >
> > > Any idea how to get the speaker grills off of the front Left & Right
> > > speakers?
> > > I have the Infinity Gold system- and I think my speakers are shot or
> > > the crossover is fried.
> > >
> > > Do I have to take the door panel off ?
