Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   How to Change right front turn signal bulb on 98GC (https://www.jeepscanada.com/jeep-mailing-list-32/how-change-right-front-turn-signal-bulb-98gc-38399/)

Cappy2112 06-01-2006 09:35 PM

How to Change right front turn signal bulb on 98GC
 

I need to replace teh right front turn signla bulb on a 98GC.
i've removed the battery but only see the bulb socket for the main
headlight.

Can anyone help with finding the right-front turn signal bulb and how
to replace it ?

thanks


L.W.(Bill) Hughes III 06-01-2006 09:47 PM

Re: How to Change right front turn signal bulb on 98GC
 
Open the hood, and using a 7mm socket remove the long headlamp
jackscrew, located as shown in the photo above, 2nd from left. Grasp the
headlight assembly on the upper inboard and lower outboard corners and
wiggle and pull very firmly outward to disengage the 3 ball stud
alignment posts from their sockets (be cautious of the sharp edges of
the grille and fender areas surrounding the headlamp).
http://www.wjjeeps.com/lamps/lampsrem.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?
>
> thanks


L.W.(Bill) Hughes III 06-01-2006 09:47 PM

Re: How to Change right front turn signal bulb on 98GC
 
Open the hood, and using a 7mm socket remove the long headlamp
jackscrew, located as shown in the photo above, 2nd from left. Grasp the
headlight assembly on the upper inboard and lower outboard corners and
wiggle and pull very firmly outward to disengage the 3 ball stud
alignment posts from their sockets (be cautious of the sharp edges of
the grille and fender areas surrounding the headlamp).
http://www.wjjeeps.com/lamps/lampsrem.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?
>
> thanks


L.W.(Bill) Hughes III 06-01-2006 09:47 PM

Re: How to Change right front turn signal bulb on 98GC
 
Open the hood, and using a 7mm socket remove the long headlamp
jackscrew, located as shown in the photo above, 2nd from left. Grasp the
headlight assembly on the upper inboard and lower outboard corners and
wiggle and pull very firmly outward to disengage the 3 ball stud
alignment posts from their sockets (be cautious of the sharp edges of
the grille and fender areas surrounding the headlamp).
http://www.wjjeeps.com/lamps/lampsrem.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?
>
> thanks


DougW 06-01-2006 09:54 PM

Re: How to Change right front turn signal bulb on 98GC
 
Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?


If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

--
DougW




DougW 06-01-2006 09:54 PM

Re: How to Change right front turn signal bulb on 98GC
 
Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?


If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

--
DougW




DougW 06-01-2006 09:54 PM

Re: How to Change right front turn signal bulb on 98GC
 
Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?


If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

--
DougW




Cappy2112 06-01-2006 10:37 PM

Re: How to Change right front turn signal bulb on 98GC
 

Great
Thank you !!

Any idea how to get the speaker grills off of the front Left & Right
speakers?
I have the Infinity Gold system- and I think my speakers are shot or
the crossover is fried.

Do I have to take the door panel off ?

L.W.(Bill) ------ III wrote:
> Open the hood, and using a 7mm socket remove the long headlamp
> jackscrew, located as shown in the photo above, 2nd from left. Grasp the
> headlight assembly on the upper inboard and lower outboard corners and
> wiggle and pull very firmly outward to disengage the 3 ball stud
> alignment posts from their sockets (be cautious of the sharp edges of
> the grille and fender areas surrounding the headlamp).
> http://www.wjjeeps.com/lamps/lampsrem.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > I need to replace teh right front turn signla bulb on a 98GC.
> > i've removed the battery but only see the bulb socket for the main
> > headlight.
> >
> > Can anyone help with finding the right-front turn signal bulb and how
> > to replace it ?
> >
> > thanks



Cappy2112 06-01-2006 10:37 PM

Re: How to Change right front turn signal bulb on 98GC
 

Great
Thank you !!

Any idea how to get the speaker grills off of the front Left & Right
speakers?
I have the Infinity Gold system- and I think my speakers are shot or
the crossover is fried.

Do I have to take the door panel off ?

L.W.(Bill) ------ III wrote:
> Open the hood, and using a 7mm socket remove the long headlamp
> jackscrew, located as shown in the photo above, 2nd from left. Grasp the
> headlight assembly on the upper inboard and lower outboard corners and
> wiggle and pull very firmly outward to disengage the 3 ball stud
> alignment posts from their sockets (be cautious of the sharp edges of
> the grille and fender areas surrounding the headlamp).
> http://www.wjjeeps.com/lamps/lampsrem.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > I need to replace teh right front turn signla bulb on a 98GC.
> > i've removed the battery but only see the bulb socket for the main
> > headlight.
> >
> > Can anyone help with finding the right-front turn signal bulb and how
> > to replace it ?
> >
> > thanks



Cappy2112 06-01-2006 10:37 PM

Re: How to Change right front turn signal bulb on 98GC
 

Great
Thank you !!

Any idea how to get the speaker grills off of the front Left & Right
speakers?
I have the Infinity Gold system- and I think my speakers are shot or
the crossover is fried.

Do I have to take the door panel off ?

L.W.(Bill) ------ III wrote:
> Open the hood, and using a 7mm socket remove the long headlamp
> jackscrew, located as shown in the photo above, 2nd from left. Grasp the
> headlight assembly on the upper inboard and lower outboard corners and
> wiggle and pull very firmly outward to disengage the 3 ball stud
> alignment posts from their sockets (be cautious of the sharp edges of
> the grille and fender areas surrounding the headlamp).
> http://www.wjjeeps.com/lamps/lampsrem.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > I need to replace teh right front turn signla bulb on a 98GC.
> > i've removed the battery but only see the bulb socket for the main
> > headlight.
> >
> > Can anyone help with finding the right-front turn signal bulb and how
> > to replace it ?
> >
> > thanks




All times are GMT -4. The time now is 05:48 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.03769 seconds with 5 queries