How to Change right front turn signal bulb on 98GC
 

I need to replace teh right front turn signla bulb on a 98GC.
i've removed the battery but only see the bulb socket for the main
headlight.

Can anyone help with finding the right-front turn signal bulb and how
to replace it ?

thanks

Re: How to Change right front turn signal bulb on 98GC
 

Open the hood, and using a 7mm socket remove the long headlamp
jackscrew, located as shown in the photo above, 2nd from left. Grasp the
headlight assembly on the upper inboard and lower outboard corners and
wiggle and pull very firmly outward to disengage the 3 ball stud
alignment posts from their sockets (be cautious of the sharp edges of
the grille and fender areas surrounding the headlamp).
http://www.wjjeeps.com/lamps/lampsrem.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?
>
> thanks

Re: How to Change right front turn signal bulb on 98GC
 

Open the hood, and using a 7mm socket remove the long headlamp
jackscrew, located as shown in the photo above, 2nd from left. Grasp the
headlight assembly on the upper inboard and lower outboard corners and
wiggle and pull very firmly outward to disengage the 3 ball stud
alignment posts from their sockets (be cautious of the sharp edges of
the grille and fender areas surrounding the headlamp).
http://www.wjjeeps.com/lamps/lampsrem.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?
>
> thanks

Re: How to Change right front turn signal bulb on 98GC
 

Open the hood, and using a 7mm socket remove the long headlamp
jackscrew, located as shown in the photo above, 2nd from left. Grasp the
headlight assembly on the upper inboard and lower outboard corners and
wiggle and pull very firmly outward to disengage the 3 ball stud
alignment posts from their sockets (be cautious of the sharp edges of
the grille and fender areas surrounding the headlamp).
http://www.wjjeeps.com/lamps/lampsrem.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?
>
> thanks

Re: How to Change right front turn signal bulb on 98GC
 

Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?

If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

--
DougW

Re: How to Change right front turn signal bulb on 98GC
 

Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?

If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

--
DougW

Re: How to Change right front turn signal bulb on 98GC
 

Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.
>
> Can anyone help with finding the right-front turn signal bulb and how
> to replace it ?

If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

--
DougW

Re: How to Change right front turn signal bulb on 98GC
 

Great
Thank you !!

Any idea how to get the speaker grills off of the front Left & Right
speakers?
I have the Infinity Gold system- and I think my speakers are shot or
the crossover is fried.

Do I have to take the door panel off ?

L.W.(Bill) ------ III wrote:
> Open the hood, and using a 7mm socket remove the long headlamp
> jackscrew, located as shown in the photo above, 2nd from left. Grasp the
> headlight assembly on the upper inboard and lower outboard corners and
> wiggle and pull very firmly outward to disengage the 3 ball stud
> alignment posts from their sockets (be cautious of the sharp edges of
> the grille and fender areas surrounding the headlamp).
> http://www.wjjeeps.com/lamps/lampsrem.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > I need to replace teh right front turn signla bulb on a 98GC.
> > i've removed the battery but only see the bulb socket for the main
> > headlight.
> >
> > Can anyone help with finding the right-front turn signal bulb and how
> > to replace it ?
> >
> > thanks

Re: How to Change right front turn signal bulb on 98GC
 

Great
Thank you !!

Any idea how to get the speaker grills off of the front Left & Right
speakers?
I have the Infinity Gold system- and I think my speakers are shot or
the crossover is fried.

Do I have to take the door panel off ?

L.W.(Bill) ------ III wrote:
> Open the hood, and using a 7mm socket remove the long headlamp
> jackscrew, located as shown in the photo above, 2nd from left. Grasp the
> headlight assembly on the upper inboard and lower outboard corners and
> wiggle and pull very firmly outward to disengage the 3 ball stud
> alignment posts from their sockets (be cautious of the sharp edges of
> the grille and fender areas surrounding the headlamp).
> http://www.wjjeeps.com/lamps/lampsrem.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > I need to replace teh right front turn signla bulb on a 98GC.
> > i've removed the battery but only see the bulb socket for the main
> > headlight.
> >
> > Can anyone help with finding the right-front turn signal bulb and how
> > to replace it ?
> >
> > thanks

Re: How to Change right front turn signal bulb on 98GC
 

Great
Thank you !!

Any idea how to get the speaker grills off of the front Left & Right
speakers?
I have the Infinity Gold system- and I think my speakers are shot or
the crossover is fried.

Do I have to take the door panel off ?

L.W.(Bill) ------ III wrote:
> Open the hood, and using a 7mm socket remove the long headlamp
> jackscrew, located as shown in the photo above, 2nd from left. Grasp the
> headlight assembly on the upper inboard and lower outboard corners and
> wiggle and pull very firmly outward to disengage the 3 ball stud
> alignment posts from their sockets (be cautious of the sharp edges of
> the grille and fender areas surrounding the headlamp).
> http://www.wjjeeps.com/lamps/lampsrem.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > I need to replace teh right front turn signla bulb on a 98GC.
> > i've removed the battery but only see the bulb socket for the main
> > headlight.
> >
> > Can anyone help with finding the right-front turn signal bulb and how
> > to replace it ?
> >
> > thanks

Re: How to Change right front turn signal bulb on 98GC
 

Bookmark: http://www.wjjeeps.com/jmenu.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> Great
> Thank you !!
>
> Any idea how to get the speaker grills off of the front Left & Right
> speakers?
> I have the Infinity Gold system- and I think my speakers are shot or
> the crossover is fried.
>
> Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

Bookmark: http://www.wjjeeps.com/jmenu.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> Great
> Thank you !!
>
> Any idea how to get the speaker grills off of the front Left & Right
> speakers?
> I have the Infinity Gold system- and I think my speakers are shot or
> the crossover is fried.
>
> Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

Bookmark: http://www.wjjeeps.com/jmenu.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> Great
> Thank you !!
>
> Any idea how to get the speaker grills off of the front Left & Right
> speakers?
> I have the Infinity Gold system- and I think my speakers are shot or
> the crossover is fried.
>
> Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

Thanks again- but do you have any references for 98 Jeeps ?
This page is for 99 and onward, and the headlamp assy is quite
different.
My headlamp only has 1 bulb, not the 5 as in the picture.

As such, now I have the headlamp out, the turn signal (which is what
needs to be replaced) is in the wraparound assembly, again, with no
visible screws/fasteners.

This is what needs to come out, so I can replace the turn signal bulb


L.W.(Bill) ------ III wrote:
> Bookmark: http://www.wjjeeps.com/jmenu.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Great
> > Thank you !!
> >
> > Any idea how to get the speaker grills off of the front Left & Right
> > speakers?
> > I have the Infinity Gold system- and I think my speakers are shot or
> > the crossover is fried.
> >
> > Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

Thanks again- but do you have any references for 98 Jeeps ?
This page is for 99 and onward, and the headlamp assy is quite
different.
My headlamp only has 1 bulb, not the 5 as in the picture.

As such, now I have the headlamp out, the turn signal (which is what
needs to be replaced) is in the wraparound assembly, again, with no
visible screws/fasteners.

This is what needs to come out, so I can replace the turn signal bulb


L.W.(Bill) ------ III wrote:
> Bookmark: http://www.wjjeeps.com/jmenu.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Great
> > Thank you !!
> >
> > Any idea how to get the speaker grills off of the front Left & Right
> > speakers?
> > I have the Infinity Gold system- and I think my speakers are shot or
> > the crossover is fried.
> >
> > Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

Thanks again- but do you have any references for 98 Jeeps ?
This page is for 99 and onward, and the headlamp assy is quite
different.
My headlamp only has 1 bulb, not the 5 as in the picture.

As such, now I have the headlamp out, the turn signal (which is what
needs to be replaced) is in the wraparound assembly, again, with no
visible screws/fasteners.

This is what needs to come out, so I can replace the turn signal bulb


L.W.(Bill) ------ III wrote:
> Bookmark: http://www.wjjeeps.com/jmenu.htm
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Great
> > Thank you !!
> >
> > Any idea how to get the speaker grills off of the front Left & Right
> > speakers?
> > I have the Infinity Gold system- and I think my speakers are shot or
> > the crossover is fried.
> >
> > Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

The post that followed Bill's probably answered your question and is
complete with pix!



Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.

> Can anyone help with finding the right-front turn signal bulb and
how
> to replace it ?



If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg


You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg


--
DougW





"Cappy2112" <cappy2112@gmail.com> wrote in message
news:1149267997.688340.118350@y43g2000cwc.googlegr oups.com...
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
>
> L.W.(Bill) ------ III wrote:
>> Bookmark: http://www.wjjeeps.com/jmenu.htm
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Cappy2112 wrote:
>> >
>> > Great
>> > Thank you !!
>> >
>> > Any idea how to get the speaker grills off of the front Left & Right
>> > speakers?
>> > I have the Infinity Gold system- and I think my speakers are shot or
>> > the crossover is fried.
>> >
>> > Do I have to take the door panel off ?
>

Re: How to Change right front turn signal bulb on 98GC
 

The post that followed Bill's probably answered your question and is
complete with pix!



Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.

> Can anyone help with finding the right-front turn signal bulb and
how
> to replace it ?



If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg


You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg


--
DougW





"Cappy2112" <cappy2112@gmail.com> wrote in message
news:1149267997.688340.118350@y43g2000cwc.googlegr oups.com...
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
>
> L.W.(Bill) ------ III wrote:
>> Bookmark: http://www.wjjeeps.com/jmenu.htm
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Cappy2112 wrote:
>> >
>> > Great
>> > Thank you !!
>> >
>> > Any idea how to get the speaker grills off of the front Left & Right
>> > speakers?
>> > I have the Infinity Gold system- and I think my speakers are shot or
>> > the crossover is fried.
>> >
>> > Do I have to take the door panel off ?
>

Re: How to Change right front turn signal bulb on 98GC
 

The post that followed Bill's probably answered your question and is
complete with pix!



Cappy2112 did pass the time by typing:
> I need to replace teh right front turn signla bulb on a 98GC.
> i've removed the battery but only see the bulb socket for the main
> headlight.

> Can anyone help with finding the right-front turn signal bulb and
how
> to replace it ?



If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg


You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg


--
DougW





"Cappy2112" <cappy2112@gmail.com> wrote in message
news:1149267997.688340.118350@y43g2000cwc.googlegr oups.com...
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
>
> L.W.(Bill) ------ III wrote:
>> Bookmark: http://www.wjjeeps.com/jmenu.htm
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Cappy2112 wrote:
>> >
>> > Great
>> > Thank you !!
>> >
>> > Any idea how to get the speaker grills off of the front Left & Right
>> > speakers?
>> > I have the Infinity Gold system- and I think my speakers are shot or
>> > the crossover is fried.
>> >
>> > Do I have to take the door panel off ?
>

Re: How to Change right front turn signal bulb on 98GC
 

Sorry.
Like Bill said, use the the '93's instructions by Doug:
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

-DougW

--
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
> L.W.(Bill) ------ III wrote:
> > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > God Bless America, Bill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Cappy2112 wrote:
> > >
> > > Great
> > > Thank you !!
> > >
> > > Any idea how to get the speaker grills off of the front Left & Right
> > > speakers?
> > > I have the Infinity Gold system- and I think my speakers are shot or
> > > the crossover is fried.
> > >
> > > Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

Sorry.
Like Bill said, use the the '93's instructions by Doug:
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

-DougW

--
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
> L.W.(Bill) ------ III wrote:
> > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > God Bless America, Bill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Cappy2112 wrote:
> > >
> > > Great
> > > Thank you !!
> > >
> > > Any idea how to get the speaker grills off of the front Left & Right
> > > speakers?
> > > I have the Infinity Gold system- and I think my speakers are shot or
> > > the crossover is fried.
> > >
> > > Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

Sorry.
Like Bill said, use the the '93's instructions by Doug:
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

-DougW

--
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
> L.W.(Bill) ------ III wrote:
> > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > God Bless America, Bill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Cappy2112 wrote:
> > >
> > > Great
> > > Thank you !!
> > >
> > > Any idea how to get the speaker grills off of the front Left & Right
> > > speakers?
> > > I have the Infinity Gold system- and I think my speakers are shot or
> > > the crossover is fried.
> > >
> > > Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

I finally got the turn signal bulb out- but it still worked.
I've re-connected everything and the turn signal works fin noe.
NMust have been a lose connection.
Curse GM for using torx screws.

Thanks for all the info- everyone

L.W.(Bill) ------ III wrote:
> Sorry.
> Like Bill said, use the the '93's instructions by Doug:
> If it's like the 93 then you take out this screw for the
> side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
>
> Then carefully remove the lower screw by inserting a thin phillips
> driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
>
> You can then take out the lower screw that holds the lamp
> in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
>
> -DougW
>
> --
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Thanks again- but do you have any references for 98 Jeeps ?
> > This page is for 99 and onward, and the headlamp assy is quite
> > different.
> > My headlamp only has 1 bulb, not the 5 as in the picture.
> >
> > As such, now I have the headlamp out, the turn signal (which is what
> > needs to be replaced) is in the wraparound assembly, again, with no
> > visible screws/fasteners.
> >
> > This is what needs to come out, so I can replace the turn signal bulb
> >
> > L.W.(Bill) ------ III wrote:
> > > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > > God Bless America, Bill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Cappy2112 wrote:
> > > >
> > > > Great
> > > > Thank you !!
> > > >
> > > > Any idea how to get the speaker grills off of the front Left & Right
> > > > speakers?
> > > > I have the Infinity Gold system- and I think my speakers are shot or
> > > > the crossover is fried.
> > > >
> > > > Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

I finally got the turn signal bulb out- but it still worked.
I've re-connected everything and the turn signal works fin noe.
NMust have been a lose connection.
Curse GM for using torx screws.

Thanks for all the info- everyone

L.W.(Bill) ------ III wrote:
> Sorry.
> Like Bill said, use the the '93's instructions by Doug:
> If it's like the 93 then you take out this screw for the
> side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
>
> Then carefully remove the lower screw by inserting a thin phillips
> driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
>
> You can then take out the lower screw that holds the lamp
> in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
>
> -DougW
>
> --
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Thanks again- but do you have any references for 98 Jeeps ?
> > This page is for 99 and onward, and the headlamp assy is quite
> > different.
> > My headlamp only has 1 bulb, not the 5 as in the picture.
> >
> > As such, now I have the headlamp out, the turn signal (which is what
> > needs to be replaced) is in the wraparound assembly, again, with no
> > visible screws/fasteners.
> >
> > This is what needs to come out, so I can replace the turn signal bulb
> >
> > L.W.(Bill) ------ III wrote:
> > > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > > God Bless America, Bill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Cappy2112 wrote:
> > > >
> > > > Great
> > > > Thank you !!
> > > >
> > > > Any idea how to get the speaker grills off of the front Left & Right
> > > > speakers?
> > > > I have the Infinity Gold system- and I think my speakers are shot or
> > > > the crossover is fried.
> > > >
> > > > Do I have to take the door panel off ?

Re: How to Change right front turn signal bulb on 98GC
 

I finally got the turn signal bulb out- but it still worked.
I've re-connected everything and the turn signal works fin noe.
NMust have been a lose connection.
Curse GM for using torx screws.

Thanks for all the info- everyone

L.W.(Bill) ------ III wrote:
> Sorry.
> Like Bill said, use the the '93's instructions by Doug:
> If it's like the 93 then you take out this screw for the
> side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
>
> Then carefully remove the lower screw by inserting a thin phillips
> driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
>
> You can then take out the lower screw that holds the lamp
> in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
>
> -DougW
>
> --
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Thanks again- but do you have any references for 98 Jeeps ?
> > This page is for 99 and onward, and the headlamp assy is quite
> > different.
> > My headlamp only has 1 bulb, not the 5 as in the picture.
> >
> > As such, now I have the headlamp out, the turn signal (which is what
> > needs to be replaced) is in the wraparound assembly, again, with no
> > visible screws/fasteners.
> >
> > This is what needs to come out, so I can replace the turn signal bulb
> >
> > L.W.(Bill) ------ III wrote:
> > > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > > God Bless America, Bill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Cappy2112 wrote:
> > > >
> > > > Great
> > > > Thank you !!
> > > >
> > > > Any idea how to get the speaker grills off of the front Left & Right
> > > > speakers?
> > > > I have the Infinity Gold system- and I think my speakers are shot or
> > > > the crossover is fried.
> > > >
> > > > Do I have to take the door panel off ?